00196693-03_UM_SX4DX4_SR706_EN.pdf - 第192页
4 Setting up and commissioning User Manual SIPLACE SX4/DX4 4.1 Transportation and Delivery Configuration F rom software version SC.706.xx Version 06/2012 EN 192 4.1.3.2 SIPLACE DX4 The machin e is configured as follows w…
User Manual SIPLACE SX4/DX4 4 Setting up and commissioning
From software version SC.706.xx Version 06/2012 EN 4.1 Transportation and Delivery Configuration
191
4
Fig. 4.1 - 2 Delivery configuration of SIPLACE SX4
(1) Signal lamp (dismantled)
(2) Monitor (dismantled)
(3) Keyboard (dismantled)
(1)
(2)
(3)
4 Setting up and commissioning User Manual SIPLACE SX4/DX4
4.1 Transportation and Delivery Configuration From software version SC.706.xx Version 06/2012 EN
192
4.1.3.2 SIPLACE DX4
The machine is configured as follows when delivered:
– The track on the single conveyor is set to a width of 210 mm. This width setting will be impor-
tant when fine-tuning the machine.
– Both keyboards are disconnected and dismantled.
– Both monitors are dismantled.
– Both indicator lamps are dismantled.
– The tape container and waste tape container are packed separately.
– All the gantry axes are fixed with shipping braces.
User Manual SIPLACE SX4/DX4 4 Setting up and commissioning
From software version SC.706.xx Version 06/2012 EN 4.1 Transportation and Delivery Configuration
193
4
Fig. 4.1 - 3 Delivery configuration of SIPLACE DX4
(1) Indicator lamp (both dismantled)
(2) Monitor (both dismantled)
(3) Keyboard (both dismantled)
(4) Tape container and waste tape container (all separate)
(1)
(2)
(3)
(4)
(1)
(2)
(3)