00196693-03_UM_SX4DX4_SR706_EN.pdf - 第294页

5 Working with the machine User Manual SIPLACE SX4/DX4 5.15 Docking the component trolley in or out From software version SC.706.xx Version 0 6/2012 EN 294

User Manual SIPLACE SX4/DX4 5 Working with the machine

From software version SC.706.xx Version 06/2012 EN 5.15 Docking the component trolley in or out

293

PLEASE NOTE 5

Cut the component tapes off flush at the front end of the X feeder modules before you dock in

the X series component trolley,

CAUTION 5

Check that the placement head is outside the range of the component trolley.

 Carefully push the component trolley into machine as far as the stop.

PLEASE NOTE 5

Close the protective covers since the component trolley can only be docked in if the covers are

closed.

 Press the button on the respective machine location until the trolley is completely docked in.

 Push the sleeve (item 1 in fig. 5.15 - 4, page 293) on both handles up and swivel the handle

down (item 2 in fig. 5.15 - 4

, page 293).

Fig. 5.15 - 4 X series component trolley - swivel handles down

(1) Push sleeve up

(2) Fold handle down

5 Working with the machine User Manual SIPLACE SX4/DX4

5.15 Docking the component trolley in or out From software version SC.706.xx Version 06/2012 EN

294

User Manual SIPLACE SX4/DX4 6 Station extensions

From software version SC.706.xx Version 06/2012 EN 6.1 Nozzle changer

295

6 Station extensions

For the relevant configurations and other options, refer to the individual specifications for the SI-

PLACE SX4 or SIPLACE DX4 machines.

6.1 Nozzle changer

Nozzle changers can greatly increase the flexibility of the placement heads for processing differ-

ent types of component. If the placement program requires a nozzle change, then the placement

head automatically returns the old nozzle to the nozzle holder and picks up the new nozzle. Noz-

zles that were separated out during the vacuum check can also be quickly changed. It is signifi-

cantly more exact and faster to pick up nozzles from a nozzle changer than would be possible

manually. When placing small components, it is essential to minimize the radial eccentricity during

nozzle rotation.

6.1.1 Nozzle changer for the SIPLACE SpeedStar

Item no. 00119715-xx C&P20 nozzle changer

Fig. 6.1 - 1 Nozzle changer for the SIPLACE SpeedStar