00196693-03_UM_SX4DX4_SR706_EN.pdf - 第293页
User Manual SIPLACE SX4/DX4 5 Working with the machine From software version SC.706.xx Version 06/2012 EN 5.15 Docking the component trolley in or out 293 PLEASE NOTE 5 Cut the component ta pes off flush at the front end…
5 Working with the machine User Manual SIPLACE SX4/DX4
5.15 Docking the component trolley in or out From software version SC.706.xx Version 06/2012 EN
292
5.15.4 Docking the component trolley
5
Fig. 5.15 - 3 Component trolley and component trolley docking unit, SIPLACE X series
(1) Component trolley docking unit, SIPLACE X series
(2) Component trolley, SIPLACE X series
(3) Locking latches
CAUTION 5
Be careful when you push the component trolley for the SIPLACE X series
into the machine and make sure that the locking latches (item 3 in fig. 5.15 - 3
, page 292) do not
bump into obstacles.
User Manual SIPLACE SX4/DX4 5 Working with the machine
From software version SC.706.xx Version 06/2012 EN 5.15 Docking the component trolley in or out
293
PLEASE NOTE 5
Cut the component tapes off flush at the front end of the X feeder modules before you dock in
the X series component trolley,
CAUTION 5
Check that the placement head is outside the range of the component trolley.
Carefully push the component trolley into machine as far as the stop.
PLEASE NOTE 5
Close the protective covers since the component trolley can only be docked in if the covers are
closed.
Press the button on the respective machine location until the trolley is completely docked in.
Push the sleeve (item 1 in fig. 5.15 - 4, page 293) on both handles up and swivel the handle
down (item 2 in fig. 5.15 - 4
, page 293).
5
Fig. 5.15 - 4 X series component trolley - swivel handles down
(1) Push sleeve up
(2) Fold handle down
5 Working with the machine User Manual SIPLACE SX4/DX4
5.15 Docking the component trolley in or out From software version SC.706.xx Version 06/2012 EN
294