00196693-03_UM_SX4DX4_SR706_EN.pdf - 第139页

User Manual SIPLACE SX4/DX4 3 Technical data and assemblies From software version SC.706.xx V ersion 06/2012 EN 3.7 PCB conveyor system 139 3.7.5 Controlling and wid th adjustment 3.7.5.1 Controlling using the Single Fun…

100%1 / 358
3 Technical data and assemblies User Manual SIPLACE SX4/DX4
3.7 PCB conveyor system From software version SC.706.xx Version 06/2012 EN
138
3.7.4 SIPLACE Quad lane conveyor (SX4 only)
Item no. 00519836-xx SIPLACE Quad lane conveyor
3
Fig. 3.7 - 5 SIPLACE Quad Lane Conveyor
(1) conveyor lane group 1
(1R) conveyor lane 1, right
(1L) conveyor lane 1, left
(2) conveyor lane group 2
(2R) conveyor lane 2, right
(2L) conveyor lane 2, left
3.7.4.1 Description
The SIPLACE quad lane conveyor can process up to eight boards at the same time. The conveyor
lanes 1R and 1L or 2R and 2L transport the boards in synchronous mode, while the two conveyor
lane groups 1 and 2 can transport the boards in both synchronous or asynchronous mode. The
two outer conveyor sides are fixed in the quad lane conveyor. The conveyor can be configured as
single lane, dual lane or quad lane, in the software, without any modifications to the hardware.
(2L)
(2R)
(1)
(1R)
(1L)
(2)
User Manual SIPLACE SX4/DX4 3 Technical data and assemblies
From software version SC.706.xx Version 06/2012 EN 3.7 PCB conveyor system
139
3.7.5 Controlling and width adjustment
3.7.5.1 Controlling using the Single Functions menu
The online help contains information on controlling the PCB conveyor system and on the Single
Functions menu.
3.7.5.2 Automatic width adjustment
When the command is received, the conveyor belts are set to the desired width. Different widths
are possible for a dual conveyor.
See the Online Help for detailed information about changing the conveyor track width.
3 Technical data and assemblies User Manual SIPLACE SX4/DX4
3.7 PCB conveyor system From software version SC.706.xx Version 06/2012 EN
140
3.7.6 Definition of PCB warpage
3.7.6.1 PCB warpage on the conveyor
PCB warpage across the direction of travel max. 1 % of the PCB diagonal, but not exceeding 2 mm
3
PCB warpage in direction of travel + PCB thickness < 5.5 mm
3
Fixed clamped edge
Movable clamping device
Printed circuit board
Conveyor side wall
Fixed clamped edge
Conveyor belt
Printed circuit board
PCB transport direction
5.5 mm