00196693-03_UM_SX4DX4_SR706_EN.pdf - 第291页

User Manual SIPLACE SX4/DX4 5 Working with the machine From software version SC.706.xx Version 06/2012 EN 5.15 Docking the component trolley in or out 291 5 Fig. 5.15 - 2 Component trolley - swivel handles up to push  W…

100%1 / 358
5 Working with the machine User Manual SIPLACE SX4/DX4
5.15 Docking the component trolley in or out From software version SC.706.xx Version 06/2012 EN
290
5
Fig. 5.15 - 1 Safety instructions for docking the component trolley in or out
In addition, the component trolley can only be docked in if the protective
covers are closed.
(1) Button for docking and undocking the component trolley at location
(T) Direction of PCB transport
5.15.2 Docking out the component trolley
Press the button on the respective machine location until the component trolley is completely
undocked.
Swivel the two handles up (item 1 in fig. 5.15 - 2).
(1)
User Manual SIPLACE SX4/DX4 5 Working with the machine
From software version SC.706.xx Version 06/2012 EN 5.15 Docking the component trolley in or out
291
5
Fig. 5.15 - 2 Component trolley - swivel handles up to push
With both hands on the handles, pull the component trolley out of the machine.
5.15.3 Safety instructions for moving the component trolley
WARNING 5
To prevent accidents, ALWAYS follow the rules listed below when you move the component trol-
ley.
Always hold the handles with both hands when you want to move the component trolley.
Remember that a component trolley with the full complement of feeder modules can tip over
sideways or forward on gradients of 20° or more.
Make sure that the surface on which the trolley is moved has a significantly smaller gradient.
Be careful not to collide with obstacles. The trolley could tip forward if it is traveling fast
enough.
5 Working with the machine User Manual SIPLACE SX4/DX4
5.15 Docking the component trolley in or out From software version SC.706.xx Version 06/2012 EN
292
5.15.4 Docking the component trolley
5
Fig. 5.15 - 3 Component trolley and component trolley docking unit, SIPLACE X series
(1) Component trolley docking unit, SIPLACE X series
(2) Component trolley, SIPLACE X series
(3) Locking latches
CAUTION 5
Be careful when you push the component trolley for the SIPLACE X series
into the machine and make sure that the locking latches (item 3 in fig. 5.15 - 3
, page 292) do not
bump into obstacles.