00196693-03_UM_SX4DX4_SR706_EN.pdf - 第27页

User Manual SIPLACE SX4/DX4 1 Introduction From software version SC.706.xx Version 06/2012 EN 1.7 Important notes on the user manual 27 1.7 Import ant notes on the user manual 1.7.1 Content s and filing of the user manua…

1 Introduction User Manual SIPLACE SX4/DX4

1.6 Operator levels From software version SC.706.xx Version 06/2012 EN

1.6 Operator levels

Certain functions or menus may only be executed or accessed by specially trained personnel. A

differentiation is made between the following operator levels:

– Production

– Advanced production

– Service (customer)

– Service (SIPLACE)

The operator levels "Advanced production" and "Service (customer)" can be password protected.

The operator level "Service (SIPLACE)" is already password protected.

Production 1

This operator level includes those people who have been trained to operate the machine. These

people are authorized to use any functions associated with operating the machine and may call

up any menus needed to use the machine.

Advanced production 1

People with this operator level have completed special training and are authorized to perform

setup tasks e.g. creating setup configurations or determining Vision parameters etc.

Service (customer) 1

People with this operator level are specially trained technicians at the customer end, who can, for

example, define machine option settings.

Service (SIPLACE) 1

People with this operator level are trained to perform service work, such as the conversion and

retrofitting of machines.

User Manual SIPLACE SX4/DX4 1 Introduction

From software version SC.706.xx Version 06/2012 EN 1.7 Important notes on the user manual

1.7 Important notes on the user manual

1.7.1 Contents and filing of the user manual

This user manual contains basic information that must be observed when setting up, operating

and maintaining the machine. The service engineers, qualified staff, operators and users plus sys-

tem owner must therefore read it before commencing installation and commissioning. The instruc-

tions must be kept permanently accessible where the machine is used.

In addition, the user must ensure that the employees have fully understood the contents of the

user manual.

1.7.2 Danger notes

WARNING 1

– A thorough knowledge of the relevant part of this user manual is required before carrying out

any work on the machine.

– All work must be carried out by appropriately trained and qualified personnel.

– All warning, caution and danger notes MUST be observed.

– Please also read chapter 2 of this operating manual through carefully.

1.7.3 Liability of the manufacturer/supplier

We hereby confirm that the contents of this user manual are of a descriptive and explanatory na-

ture only and do not contain any contractual conditions or guaranties. The liability and obligations

assumed by ASM Assembly Systems GmbH&Co.KG can be found exclusively in the relevant

contract agreement concerning the supply of the machine described in this manual. This applies

in particular to all statements regarding performance or service life and the agreed liability for

faults or defects. The provisions of the contract regarding the liability for faults or defect are neither

extended nor restricted by any statements in this user manual.

1 Introduction User Manual SIPLACE SX4/DX4

1.7 Important notes on the user manual From software version SC.706.xx Version 06/2012 EN

1.7.4 Revision index

1.7.5 Further information about and contents of the documentation package

1.7.5.1 How to get information

If you have any further questions concerning this manual or if you would like additional information

on a particular topic, please get in touch with your local SIPLACE dealer or contact us directly at:

ASM Assembly Systems GmbH&Co.KG

Rupert-Mayer-Str. 44

81379 Munich 1

1.7.5.2 SIPLACE on the World Wide Web (WWW)

We also have our own site on the Internet. Why not log onto our SIPLACE home page at

http://www.siplace.com?

All the menus and other information are available in two languages: You can choose between the

German and English versions.

The various headings contain information on

– our products

– services

– contacts, etc.

Registered customers can also access the SIPLACE User Group. There you can call up special

information on our placement machines, such as

– technical documentation

– technical information

– spare parts catalogs etc.

Registering for access to the User Group is sheer child’s play:

 Click on ’Register now’.

 Complete the registration form and just send it off.

You will then quickly receive access authorization with USER ID and a password.

Manual Software version Edition

First edition User manual SX4 from SC.704.02 10/2010 EN

Revision User manual SX4/DX4 SC.705.xx or later 02/2011 EN

Revision User manual SX4/DX4 SC.706.xx or later 06/2012 EN