00196920-07_SIPLACE_Pro_FeatureDescription_DE_EN.pdf

SIPLACE Pro Feature Descri ption V ersion 4.x t o V1 1.x SIPLACE Pro Funktionsbesc hrei bung V ersion 4.x bi s V1 1.x A usgabe 05/2014 Edition

SIPLACE Pro Feature Description

Version 4.x to V11.x

SIPLACE Pro Funktionsbeschreibung

Version 4.x bis V11.x

Ausgabe 05/2014 Edition

All names identified by ® are registered trademarks of the ASM Assembly Systems GmbH & Co. KG. The

remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes

could violate the rights of the owner.

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information given in this publication is reviewed regularly and any necessary corrections are included in

subsequent editions.

ASM Assembly Systems GmbH & Co. KG Item-no.: 00196920-07

Rupert-Mayer-Strasse 44

81379 München

Germany

www.siplace.com

Alle mit dem Schutzrechtsvermerk ® gekennzeichneten Bezeichnungen sind eingetragene Marken der ASM

Assembly Systems GmbH & Co. KG. Die übrigen Bezeichnungen in dieser Schrift können Marken sein, deren

Benutzung durch Dritte für deren Zwecke die Rechte der Inhaber verletzen kann.

Wir haben den Inhalt der Druckschrift auf Übereinstimmung mit der beschriebenen Hard- und Software geprüft.

Dennoch können Abweichungen nicht ausgeschlossen werden, sodass wir für die vollständige Übereinstimmung

keine Gewähr übernehmen. Die Angaben in dieser Druckschrift werden regelmäßig überprüft und notwendige

Korrekturen sind in den nachfolgenden Auflagen enthalten.

ASM Assembly Systems GmbH & Co. KG Artikel-Nr.: 00196920-07

Rupert-Mayer-Straße 44

81379 München

Deutschland

www.siplace.com

SIPLACE Pro Feature Description Ausgabe 05/2014 Edition

Contents

1 SIPLACE Pro Feature Description 9

2 Feature Description SIPLACE Pro V4.xx 11

2.1 Hardware Features (V4.0) ............................................................................... 11

2.1.1 SIPLACE D3 and SIPLACE D4 ....................................................................... 11

2.1.2 3 x 8 mm 0201 S mm Feeder on all stations placeable .................................... 11

2.1.3 Teaching Pocket Fiducials ............................................................................... 11

2.1.4 Support of DataIO Road Runner ..................................................................... 12

2.2 Software Features (V4.0) ................................................................................ 12

2.2.1 Licensing Options ............................................................................................ 12

2.2.2 Addition to Difference Editor Wizard ................................................................ 13

2.2.3 Filter Function in Tree Control for all Objects possible ..................................... 13

2.2.4 CAD & ASCII Import with/without Overwrite .................................................... 13

2.2.5 Save ASCII Import Filter Comments ................................................................ 13

2.2.6 View Panel Hierarchy / Tree View for Panels .................................................. 13

2.2.7 Table Redesign ............................................................................................... 13

2.2.8 Improvements of the Line Control GUI ............................................................ 14

2.2.9 Optimizer Feature: Don't change Component Location in Target Setup .......... 14

2.2.10 Help on Optimizer Error Messages .................................................................. 15

2.2.11 Improved Report Functions ............................................................................. 15

2.3 Features in combination with station software 603 (V4.1) ................................ 20

2.3.1 Support of SIPLACE D1 and SIPLACE D2 ...................................................... 20

2.3.2 Support of WPC 4 for SIPLACE D1 ................................................................. 20

2.3.3 High Force Twin Head ..................................................................................... 21

2.3.4 Twin Head in Dual Gantry Placement Areas .................................................... 21

2.3.5 MTC 2 in Dual Gantry Placement Areas .......................................................... 22

2.3.6 Feeder Adapter for Linear Feeder of X Series ................................................. 23

2.3.7 New Feeder Types .......................................................................................... 23

2.3.8 3-D Coplanarity Module ................................................................................... 23

2.3.9 New categorization for different setup verification systems .............................. 24

2.4 General Improvements in SIPLACE Pro Desk (V4.1) ...................................... 24

2.4.1 Multi-selection in graphical editor .................................................................... 24

2.4.2 Change parameters of multiple selected rows in grids ..................................... 24

2.4.3 Different Options for closing open objects ....................................................... 25

2.4.4 Customizing SIPLACE Pro Desk ..................................................................... 25

2.5 Features of the Board Editor (V4.1) ................................................................. 25

2.5.1 Highlight all components or component shapes of the same type ................... 25

2.5.2 Add or remove a coordination system for panel(s) ........................................... 25

2.5.3 Add or remove inkspots ................................................................................... 25

2.5.4 Reference of inkspots related to the board origin or the panel origin

possible ........................................................................................................... 25

2.5.5 Graphical transparency for components on panels and sub-panels ................. 26

2.5.6 Highlight inkspots ............................................................................................ 26

2.5.7 Hide or show component pickup position in the drawing .................................. 26

2.5.8 Rotate selected components +/- 90° via mouse click ....................................... 26

2.6 Features of the Setup Editor (V4.1) ................................................................. 26

2.6.1 Clipboard for Setup Objects............................................................................. 26

2.6.2 Swap Magazines within a nozzle changer ....................................................... 26

2.6.3 Tabular view for individual nozzle magazines .................................................. 26