00196920-07_SIPLACE_Pro_FeatureDescription_DE_EN.pdf - 第62页
SIPLACE Pro Fe ature Des cription Ausgabe 05/2014 Edit ion 62 5.4.1 New Hardwa re Components in the Setup Editor Object type Name Descripti on Head t ype CPP 12 2xxx CPP - Head with 12 segm ents Nozzle C ha nger NC CPP 2…
SIPLACE Pro Feature Description Ausgabe 05/2014 Edition
61
5.2 Support of 2x8mm X Feeders
SIPLACE Pro 7.0 supports the new 2x8mm X-Feeder type for machines of the X series, X4i and
SX. This feeder is equipped with two component divisions in 8 mm tapes. The 2x8mm X feeder can
be used for 0201 component shapes but not for 01005 shapes.
For a detailed description, please refer to the relevant documents.
5.3 Support of the IPTE Multi Stick Feeder
SIPLACE Pro 7.0 supports the new IPTE MSF 60 and IPTE MSF XL80 feeder type for machines of
the X series and SX1,SX2. The feeders can be placed on the X table types COT 40 and COT 40.
5.4 Support of the Multistar CPP Placement Head
The Multistar CPP head (Collect&Pick&Place) has the ability to work in three different placement
modes.
● Small components can be placed in the Collect&Place mode.
● Small to medium components can be placed in the mixed mode.
● Medium components and one large component (in the 6 o' clock position) can be placed in the
Pick&Place mode.
The Multistar CPP head can be installed in two different positions (high and low position). In the
high position components with a height of up to 11.5 mm can be placed.
SIPLACE Pro Feature Description Ausgabe 05/2014 Edition
62
5.4.1 New Hardware Components in the Setup Editor
Object type Name Description
Head type CPP 12 2xxx CPP-Head with 12 segments
Nozzle Changer
NC CPP 20xx 2x3 Nozzle changer for X-series machines
for nozzle series 20xx.
NC CPP 20xx28xx 2x3 Nozzle changer for X-series machines
for nozzle series 20xx und 28xx.
NC CPP 20xx 2x2 Nozzle changer for X4i on location 2 and
4 for nozzle series 20xx.
NC CPP 20xx28xx 2x2 Nozzle changer for X4i on location 2 and
4 for nozzle series 20xx and 28xx.
NC PP 20xx 4 Nozzle changer for SX-series machines.
With 4 magazines for nozzle series 20xx.
NC CPP 20xx28xx 4 Nozzle changer for SX-series machines.
With 4 magazines for nozzle series 20xx
and 28xx.
Nozzle Magazine
CPP12 20xx Nozzle magazine with 12 pockets for
nozzle series 20xx.
CPP 9 28xx Nozzle magazine with 9 pockets for
nozzle series 28xx.
5.5 Support of Station Software 703.xx
SIPLACE Pro 7.0 supports the station software 703.xx on the machine types X2, X3, X4, X4i and
SX.
The station software 703 includes all functions of the station software 702.xx.
That means that the following basic functions are supported:
● SIPLACE SX
● Waffle pack changer, type WPC5
● An alternative camera position for SIPLACE X4i
● 2x8mm X feeders
SIPLACE Pro Feature Description Ausgabe 05/2014 Edition
63
5.5.1 Overview of the Component Supply
Station software 703.xx supports the following new feeder types.
Feeder type Name
Waffle pack changer
WPC5
Linear feeder with adapter on
X table
IPTE MSF 60 AX
IPTE MSF XL80 AX
5.5.2 New Nozzles
The following new nozzles are available for the CPP head.
Nozzle series Name
20xx
2028 CPP
2057 CPP
5.5.3 New Nozzle Changers
The following new nozzle changers are available for the C&P 20 head and the Twin Head.
Nozzle changer Namr
C&P20 10xx 4 Nozzle changer for the C&P20
head with 4 magazines for the
nozzle series 10xx.
NC Twin Flexible 8 Nozzle changer for the Twin
Head with up to 8 magazines
for the nozzle series 5xx.
5.6 Support of WPC5
SIPLACE Pro 7.0 supports the new waffle pack changer type WPC5. The WPC5 has got 28 levels
for waffle packs and can be used on SIPLACE SX machines. For detailed descriptions and
possible configurations, please refer to the relevant SIPLACE SX documents.