00196920-07_SIPLACE_Pro_FeatureDescription_DE_EN.pdf - 第36页
SIPLACE Pro Fe ature Des cription Ausgabe 05/2014 Edit ion 36 3.2.4 Show and Hide Individual Panels on a Board It is not o nly pos sible to hi de and s how plac ement positions of com plete boards b ut also to hide and s…
SIPLACE Pro Feature Description Ausgabe 05/2014 Edition
35
3.2.2 New Functions in ASCII Centroid Wizard
In the ASCII Centroid Wizard (Step 3) of SIPLACE Pro 5.0 there is a new column "Transparent". In
case there is a column available with the identification 0/1 (0 = not transparent, 1 = transparent),
the user can assign the designation "Transparent" to this column. This makes it possible to display
individual components transparently.
3.2.3 Simple Alignment of a Graphic behind a Board in the Board Editor
In the board editor of SIPLACE Pro it is possible to align a graphic (bmp, jpg, gif) in a much simpler
way behind a board. You just have to define two pairs of points (board and graphic). For more
detailed information please refer to the online help.
SIPLACE Pro Feature Description Ausgabe 05/2014 Edition
36
3.2.4 Show and Hide Individual Panels on a Board
It is not only possible to hide and show placement positions of complete boards but also to hide
and show single panels. This setting is only locally visible in the board editor and it is not saved.
The optimizer considers all boards and does not consider if these panels are shown or hidden.
NOTICE
Panels from the 3rd level (main level = level 0) can not be shown or hidden.
3.3 Optimizer Features (V5.0 xx)
3.3.1 Identical Nozzle Configuration for C&P Heads for all Recipes in a Job
In SIPLACE Pro 5.0 there is a new option (Generate identical C&P head nozzle configuration for all
recipes) in the optimizer parameters. This option enables the same nozzle configuration (fixed
setup) on the C&P heads for all recipes of a job. This configuration avoids a nozzle change if
several recipes have to be placed in a job.
NOTICE
This function is also valid for the special segments required for 01005 placement of the D
series. The segments do not have to be changed for every recipe.
SIPLACE Pro Feature Description Ausgabe 05/2014 Edition
37
Results in the Setup of "Identical Nozzle Configuration"
3.3.2 Avoid Redistributing Components on Placement Heads
In SIPLACE Pro 5.0 there is the new option "Do not change placement sequence". This option can
only be activated in optimizer level 2 and in expert mode. This new option is an addition to the
already existing option "Avoid redistributing placement positions for each head".
This new option avoids redistributing the placement positions for each head. And in this additional
option the placement sequence during optimization remains the same.
Activate this function if you have already achieved an optimal production during successful
optimization but you need to optimize again. The optimization results you have already achieved
for the production time remain the same after a new optimization.