00196920-07_SIPLACE_Pro_FeatureDescription_DE_EN.pdf - 第24页

SIPLACE Pro Fe ature Des cription Ausgabe 05/2014 Edit ion 24 2.3.9 New catego rizat ion f or dif ferent set up v erificat ion sy stems SIPLACE Pro 4.1 c hanges the activati on of setup verif ication s ystem s with com p…

100%1 / 350
SIPLACE Pro Feature Description Ausgabe 05/2014 Edition
23
2.3.6 Feeder Adapter for Linear Feeder of X Series
Up to now only X-feeders (= tape feeders) could be setup on X-tables. In order to allow linear
feeders on X- tables you could use a feeder adapter. Already existing linear feeder types could be
setup with this feeder adapter on X tables. In SIPLACE Pro this feeder adapter combination is
listed as individual feeder type.
Following Linear Feeders can be setup with the feeder adapter on X Series machines with station
software 603.
Existing Feeder
Type
New Feeder
Type
Feeder Code Division Number of
tracks on
X-Table
Linear 95 Linear 3x95 AX 514 3 3
Linear 15 Linear 2x15 AX 516 2 3
Linear 30 Linear 30 AX 517 1 3
2.3.7 New Feeder Types
Following Feeder types have been added:
Arbitray Tray Carrier (ATC) X: Tray feeder for X tables (Tray in the trough)
Label Presenter: Feeder for all machine types with S feeder interface
(HS-Tables, HF-Tables, S-Tables, CF/CS-Tables)
Label Presenter AX: Feeder for x series machines, together with feeder adapter
You find all details on the compatibility of each feeder type in Appendix A: Supported Hardware.
2.3.8 3-D Coplanarity Module
The new 3-D Coplanarity Module (PP3-D Coplanarity Module) could only be configured on X series
machines (X2, X3, X4) and the SIPLACE D3 running with station software 603. In contrast to the
predecessor the new coplanarity module measures the whole surface of the component.
NOTICE
– The new coplanarity camera can only be setup on location 3 of an X series machine
and not in combination with a C&P head, in contrast to a flip chip camera.
– You could configure on each station of the X series a coplanarity module or as
alternative a 3-D-BGA Sensor together with a Twin Head or a High Force Twin Head.
SIPLACE Pro Feature Description Ausgabe 05/2014 Edition
24
2.3.9 New categorization for different setup verification systems
SIPLACE Pro 4.1 changes the activation of setup verification systems with component barcode.
The existing 3 old barcode scanners (Siemens, SIPLACE Mobile Verifier (SMV) and SIPLACE
Setup Center) are allocated to the new setup verification systems as follows:
Setup verification
systems
Existing setup verification
systems
internal (unforced) Siemens hand-held scanner
external (unforced)
SIPLACE Setup Center without
communication to the machine
(= unforced setup verification)
external (without CLI
component level
indicator)
SIPLACE Setup Center without
component level indicator means
without quantity barcodes but with
splice sensor)
external (forced with CLI
component level
indicator)
SMV (SIPLACE Mobile Verifier)
SIPLACE Setup Center
The option setup verification is licensed for following systems:
● external (forced without component level indicator CLI)
● external (forced with component level indicator CLI)
Please consider following restriction for the setup verification system:
NOTICE
The Optimizer supports only lines that have the same setup verification system ("internal
unforced" or "external unforced" or "external forced").
2.4 General Improvements in SIPLACE Pro Desk (V4.1)
2.4.1 Multi-selection in graphical editor
Multi-selection in grids (i.e. placement list, fiducial list) could be also displayed in the graphical
editor.
2.4.2 Change parameters of multiple selected rows in grids
In the lists of different editors (placement list editor, board editor, setup editor, restriction editor and
line editor) you could change selected value(s) for multiple selected rows in grids at one time.
Selected values are changed via context menu "change value(s) for selected items" of multiple
selected rows.
SIPLACE Pro Feature Description Ausgabe 05/2014 Edition
25
2.4.3 Different Options for closing open objects
Use the context menu - on the on the tabs right below the graphical editor - to close open objects.
Following options are available for closing open objects:
● Close
● Close All
● Close All But This
2.4.4 Customizing SIPLACE Pro Desk
User with administrator rights could add or remove the tree control view in the SIPLACE Pro Desk
for following objects (Tools -> Customize)
● Table
● Stations
● Nozzles
● Feeders
It is a precondition that the security is on (Tools -> Settings -> Global Settings).
2.5 Features of the Board Editor (V4.1)
2.5.1 Highlight all components or component shapes of the same type
In the board editor and the placement list editor you could select and mark via the context menu
following objects of the same type
– Highlight all components of the same type (=name)
– Highlight all component shapes of the same type (= name)
You can select the objects in the graphical editor and in the grids.
NOTICE
For panels and cluster (consisting of several identical panels) all selected objects are
highlighted. For copied panels the selection is not highlighted on the copied panels.
2.5.2 Add or remove a coordination system for panel(s)
In the drawing of the board editor you can add or remove a coordination system via the icon
(show orientation lines).
2.5.3 Add or remove inkspots
In the drawing of the board editor you can add or remove inkspots via the icon (show inkspots).
2.5.4 Reference of inkspots related to the board origin or the panel origin possible
In the board editor you can relate inkspots of individual panels to the panel origin or the board
origin. This is only possible for panels on the first level.