00196920-07_SIPLACE_Pro_FeatureDescription_DE_EN.pdf - 第93页
SIPLACE Pro Fe ature Des cription Ausgabe 05/2014 Edit ion 93 8.2.6 Change Tables W ith the help of the new fu nction Change Table , the Setup Edi tor can no w sho w all availa ble tables f or each loc ation. As an opti …
SIPLACE Pro Feature Description Ausgabe 05/2014 Edition
92
8.2.5 Additional Workflow for LED Pairing
You can now define which workflow you want to use:
● One component per LED type with additional brightness class data (LRX format) or
● One component per brightness class (LRX2 format).
Figure 8-4: LED Pairing workflows
SIPLACE Pro Feature Description Ausgabe 05/2014 Edition
93
8.2.6 Change Tables
With the help of the new function Change Table, the Setup Editor can now show all available
tables for each location. As an option, you can apply feeders which have already been configured
and delete the previously used table. These functions are useful, for example, when replacing a
fixed DX table with a DX changeover table.
Figure 8-5: Changing table options
8.2.7 Improved Configuration of MTC 2
The procedure for filling tower feeders has been enhanced and there are now two additional new
options available.
● The two new top performance filling strategies Fill up for all boards and Fill up for any board
take into account the number of components needed. In this case, the towers are only filled up
as much as is really needed to produce the number of boards specified in the recipe.
● The best performance filling strategies configure the components in the tower so that these are
emptied preferably from bottom to top.
● To enhance performance, the wide tower of the MTC 2 only has one component configured per
level as a default.
● This same component will no longer be configured in both towers.
SIPLACE Pro Feature Description Ausgabe 05/2014 Edition
94
Figure 8-6: Improved configuration of MTC2
8.2.8 Adjustable Speeds for 2x8mm X Feeders
Supported from station software version 706. SIPLACE Pro now allows you to select different
speeds for 2x8 mm X feeders: slow, medium, fast. The corresponding feeder firmware may need to
be upgraded for this.
To obtain this firmware, please contact your local SIPLACE Service team.
8.2.9 New 16 mm XN Feeder
Supported as of station software version 704. Version 704.03c or higher is needed at the station
end in order to operate this feeder.
To obtain this software, please contact your local SIPLACE Service team.