00196920-07_SIPLACE_Pro_FeatureDescription_DE_EN.pdf - 第26页

SIPLACE Pro Fe ature Des cription Ausgabe 05/2014 Edit ion 26 2.5.5 Graphical tra nsparency for components on panels and s ub - panels In the bo ard editor you can set the tr anspare ncy leve l for each p anel or sub - p…

100%1 / 350
SIPLACE Pro Feature Description Ausgabe 05/2014 Edition
25
2.4.3 Different Options for closing open objects
Use the context menu - on the on the tabs right below the graphical editor - to close open objects.
Following options are available for closing open objects:
● Close
● Close All
● Close All But This
2.4.4 Customizing SIPLACE Pro Desk
User with administrator rights could add or remove the tree control view in the SIPLACE Pro Desk
for following objects (Tools -> Customize)
● Table
● Stations
● Nozzles
● Feeders
It is a precondition that the security is on (Tools -> Settings -> Global Settings).
2.5 Features of the Board Editor (V4.1)
2.5.1 Highlight all components or component shapes of the same type
In the board editor and the placement list editor you could select and mark via the context menu
following objects of the same type
– Highlight all components of the same type (=name)
– Highlight all component shapes of the same type (= name)
You can select the objects in the graphical editor and in the grids.
NOTICE
For panels and cluster (consisting of several identical panels) all selected objects are
highlighted. For copied panels the selection is not highlighted on the copied panels.
2.5.2 Add or remove a coordination system for panel(s)
In the drawing of the board editor you can add or remove a coordination system via the icon
(show orientation lines).
2.5.3 Add or remove inkspots
In the drawing of the board editor you can add or remove inkspots via the icon (show inkspots).
2.5.4 Reference of inkspots related to the board origin or the panel origin possible
In the board editor you can relate inkspots of individual panels to the panel origin or the board
origin. This is only possible for panels on the first level.
SIPLACE Pro Feature Description Ausgabe 05/2014 Edition
26
2.5.5 Graphical transparency for components on panels and sub-panels
In the board editor you can set the transparency level for each panel or sub-panel. This helps to
make components on different layers visible.
You can make individual components transparent in the drawing of the board editor in order to
highlight components that lie on top of each other.
2.5.6 Highlight inkspots
In the board editor you can highlight inkspots via the button "Highlight". This helps to make the
inkspot on individual panels or the global inkspot on the board easily visible.
2.5.7 Hide or show component pickup position in the drawing
In the drawing of the board editor you can hide or show component pickup positions via the icon
(show component pickup point).
2.5.8 Rotate selected components +/- 90° via mouse click
In placement lists of the board editor you can rotate selected components (single and multi-
selection) by +/- 90° via the context menu.
2.6 Features of the Setup Editor (V4.1)
2.6.1 Clipboard for Setup Objects
You can copy objects – like feeders, nozzle magazines, nozzle changer and tables – from the
setup editor to a clipboard and if necessary to a different setup.
In addition, you can copy or store lead groups from the component shape editor in the clipboard.
2.6.2 Swap Magazines within a nozzle changer
In the setup editor you can switch individual magazines within a nozzle changer via the icon
(Swap Magazines) without configuring them again.
2.6.3 Tabular view for individual nozzle magazines
In the setup editor you can display the nozzle changer in a tabular view listing the magazine(s) and
the individual pocket(s).
SIPLACE Pro Feature Description Ausgabe 05/2014 Edition
27
2.7 Features of the Component Shape Editor (V4.1)
2.7.1 SIPLACE Vision System Compatibility Check
In the component shape editor the SIPLACE vision compatibility checks with which SIPLACE vision
system the properties of the component shape could be produced.
Component shapes (CS) can contain different options. These options refer to different software
versions of the vision system SIPLACE vision. If there are compatibility problems of CS and vision
system the optimizer messages dialog of the optimizer displays a warning/information.
For example a CS consists of a camera that can not measure this CS. The optimization is
successful and the optimizer messages dialog displays the warning/information that this CS can
not be measured with the selected camera.
2.7.2 Copy & Paste Lead Groups in the Component Shape Editor
In the component shape editor you can simply copy and paste lead groups via the context menu. A
new tab is displayed. The newly added lead group is shown in the center of the graphical view.
2.7.3 Search function for Component Shapes
Component shapes can be filtered for certain criteria (like type, body size, lead type, lead size,
pich). You can start the search function via the context menu in the tree view for component
shapes for via Tools - > Find Component Shapes.
2.7.4 Component Orientation Correction in the Component Shape Editor
The vision system can measure components from different angles by entering symmetries in the
component shape editor (Tab: ICOS Lead Group).
Number of Symmetries Angle
0 axis No symmetry
2 – 2 axes 0°, 90
4 – 4 axes 0°, 90°, 180°, 270°
6 – 6 axes 0°, 60°, 120°, 180°, 240°, 300°
8 – 8 axes 0°, 45°, 90°, 135°, 180°, 225°, 270°, 315°
Following component shapes have at least 1 symmetry:
● Nonstandard
● BGA
● CCGA
● Connectors
● DPACK
● PLCC
● QFP
● Shield