00196920-07_SIPLACE_Pro_FeatureDescription_DE_EN.pdf - 第3页

SIPLACE Pro Fe ature Des cription Ausgabe 05/2014 Edit ion 3 Conten ts 1 SIPLACE Pro Feature Description 9 2 Feature Description SIPLA C E Pro V4 .xx 11 2.1 Hardware Features (V4.0) ......................................…

All names identified by ® are registered trademarks of the ASM Assembly Systems GmbH & Co. KG. The

remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes

could violate the rights of the owner.

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information given in this publication is reviewed regularly and any necessary corrections are included in

subsequent editions.

ASM Assembly Systems GmbH & Co. KG Item-no.: 00196920-07

Rupert-Mayer-Strasse 44

81379 München

Germany

www.siplace.com

Alle mit dem Schutzrechtsvermerk ® gekennzeichneten Bezeichnungen sind eingetragene Marken der ASM

Assembly Systems GmbH & Co. KG. Die übrigen Bezeichnungen in dieser Schrift können Marken sein, deren

Benutzung durch Dritte für deren Zwecke die Rechte der Inhaber verletzen kann.

Wir haben den Inhalt der Druckschrift auf Übereinstimmung mit der beschriebenen Hard- und Software geprüft.

Dennoch können Abweichungen nicht ausgeschlossen werden, sodass wir für die vollständige Übereinstimmung

keine Gewähr übernehmen. Die Angaben in dieser Druckschrift werden regelmäßig überprüft und notwendige

Korrekturen sind in den nachfolgenden Auflagen enthalten.

ASM Assembly Systems GmbH & Co. KG Artikel-Nr.: 00196920-07

Rupert-Mayer-Straße 44

81379 München

Deutschland

www.siplace.com

SIPLACE Pro Feature Description Ausgabe 05/2014 Edition

Contents

1 SIPLACE Pro Feature Description 9

2 Feature Description SIPLACE Pro V4.xx 11

2.1 Hardware Features (V4.0) ............................................................................... 11

2.1.1 SIPLACE D3 and SIPLACE D4 ....................................................................... 11

2.1.2 3 x 8 mm 0201 S mm Feeder on all stations placeable .................................... 11

2.1.3 Teaching Pocket Fiducials ............................................................................... 11

2.1.4 Support of DataIO Road Runner ..................................................................... 12

2.2 Software Features (V4.0) ................................................................................ 12

2.2.1 Licensing Options ............................................................................................ 12

2.2.2 Addition to Difference Editor Wizard ................................................................ 13

2.2.3 Filter Function in Tree Control for all Objects possible ..................................... 13

2.2.4 CAD & ASCII Import with/without Overwrite .................................................... 13

2.2.5 Save ASCII Import Filter Comments ................................................................ 13

2.2.6 View Panel Hierarchy / Tree View for Panels .................................................. 13

2.2.7 Table Redesign ............................................................................................... 13

2.2.8 Improvements of the Line Control GUI ............................................................ 14

2.2.9 Optimizer Feature: Don't change Component Location in Target Setup .......... 14

2.2.10 Help on Optimizer Error Messages .................................................................. 15

2.2.11 Improved Report Functions ............................................................................. 15

2.3 Features in combination with station software 603 (V4.1) ................................ 20

2.3.1 Support of SIPLACE D1 and SIPLACE D2 ...................................................... 20

2.3.2 Support of WPC 4 for SIPLACE D1 ................................................................. 20

2.3.3 High Force Twin Head ..................................................................................... 21

2.3.4 Twin Head in Dual Gantry Placement Areas .................................................... 21

2.3.5 MTC 2 in Dual Gantry Placement Areas .......................................................... 22

2.3.6 Feeder Adapter for Linear Feeder of X Series ................................................. 23

2.3.7 New Feeder Types .......................................................................................... 23

2.3.8 3-D Coplanarity Module ................................................................................... 23

2.3.9 New categorization for different setup verification systems .............................. 24

2.4 General Improvements in SIPLACE Pro Desk (V4.1) ...................................... 24

2.4.1 Multi-selection in graphical editor .................................................................... 24

2.4.2 Change parameters of multiple selected rows in grids ..................................... 24

2.4.3 Different Options for closing open objects ....................................................... 25

2.4.4 Customizing SIPLACE Pro Desk ..................................................................... 25

2.5 Features of the Board Editor (V4.1) ................................................................. 25

2.5.1 Highlight all components or component shapes of the same type ................... 25

2.5.2 Add or remove a coordination system for panel(s) ........................................... 25

2.5.3 Add or remove inkspots ................................................................................... 25

2.5.4 Reference of inkspots related to the board origin or the panel origin

possible ........................................................................................................... 25

2.5.5 Graphical transparency for components on panels and sub-panels ................. 26

2.5.6 Highlight inkspots ............................................................................................ 26

2.5.7 Hide or show component pickup position in the drawing .................................. 26

2.5.8 Rotate selected components +/- 90° via mouse click ....................................... 26

2.6 Features of the Setup Editor (V4.1) ................................................................. 26

2.6.1 Clipboard for Setup Objects............................................................................. 26

2.6.2 Swap Magazines within a nozzle changer ....................................................... 26

2.6.3 Tabular view for individual nozzle magazines .................................................. 26

2.7 Features of the Component Shape Editor (V4.1) ............................................. 27

2.7.1 SIPLACE Vision System Compatibility Check ................................................. 27

2.7.2 Copy & Paste Lead Groups in the Component Shape Editor ........................... 27

2.7.3 Search function for Component Shapes .......................................................... 27

2.7.4 Component Orientation Correction in the Component Shape Editor ................ 27

2.7.5 Deactivate check for minimal component shape structures ............................. 28

2.7.6 Incomplete component shape description with SIPLACE vision system V33 ... 28

2.8 Features of the Difference Editor (V4.1) .......................................................... 29

2.8.1 Comparison of Boards in the Difference Editor ................................................ 29

2.8.2 Improved Comparison of Component Shapes in the Difference Editor ............ 29

2.9 Optimizer Features (V4.1) ............................................................................... 29

2.9.1 Multi Job Optimization (SIPLACE Optimizer GUI 4.1) ...................................... 29

2.10 Features of the Query Tool (V4.1) ................................................................... 29

2.10.1 New Search Function for Components in the Query Tool ................................ 29

2.11 Features of the LC GUI (V4.1) ......................................................................... 30

2.11.1 Integration of SIPLACE P(ro Optimizer Messages in the Line Control GUI ...... 30

2.11.2 Integrity Check without Repartitioning of Placement Steps .............................. 30

3 Feature Description SIPLACE Pro V5.xx 31

3.1 Features in combination with Station Software 604 (V5.0 xx) .......................... 31

3.1.1 Higher placement performance of C&P20 heads of X series ........................... 31

3.1.2 Increased Machine Performance due to Reduced Board Clamping during

Transport ......................................................................................................... 31

3.1.3 01005 Placement for X Series and D Series .................................................... 31

3.1.4 New Dip Module for X Series ........................................................................... 32

3.1.5 Intelligent S Feeder with Automatic Pitch Download ........................................ 33

3.1.6 Shutterless S Feeder (3 x 8 mm SL) ................................................................ 33

3.1.7 Coplanarity Tolerances in Component Shape Editor ....................................... 34

3.2 General Improvements in SIPLACE Pro Desk (V5.0 xx) .................................. 34

3.2.1 Redesign Lead Groups in Component Shape Editor ....................................... 34

3.2.2 New Functions in ASCII Centroid Wizard ........................................................ 35

3.2.3 Simple Alignment of a Graphic behind a Board in the Board Editor ................. 35

3.2.4 Show and Hide Individual Panels on a Board .................................................. 36

3.3 Optimizer Features (V5.0 xx) ........................................................................... 36

3.3.1 Identical Nozzle Configuration for C&P Heads for all Recipes in a Job ............ 36

3.3.2 Avoid Redistributing Components on Placement Heads .................................. 37

3.3.3 Save Optimizer SPOT Files in a Separate Default Folder ................................ 38

3.4 Features of LC GUI (V5.0 xx) .......................................................................... 38

3.4.1 Download of Partial Setups ............................................................................. 38

3.5 Features in combination with Station Software 605 and 701 (V5.1) ................. 39

3.5.1 Support of SIPLACE Machines with Station Software 605 and 701 ................. 39

3.5.2 Support of SIPLACE X4i with Station Software 701 ......................................... 40

3.5.3 I Placement with SIPLACE X4i ........................................................................ 40

3.5.4 Increased Placement Performance for Twin Head – Benchmark 5000 cph ..... 40

3.5.5 WPC 4 for SIPLACE D3, X3, X2 Machines with S Tables ............................... 40

3.5.6 Support of Reject Feeder with X Adapter......................................................... 40

3.6 Features of SIPLACE Pro Optimizer GUI (V5.1) .............................................. 41

3.6.1 Recipe Analyzer .............................................................................................. 41

3.6.2 Precedence Finder .......................................................................................... 42

3.7 Features of Optimization (V5.1) ....................................................................... 43

3.7.1 Freeze Tables ................................................................................................. 43

3.7.2 Remove Unused Feeders from Fixed Setup .................................................... 43

3.7.3 Option Interference Edge in the Board Editor .................................................. 43

3.8 Features of LC GUI (V5.1) ............................................................................... 44

3.8.1 Avoid redistributing components in Integrity Check ......................................... 44

3.9 Features of SIPLACE Vision (V5.1) ................................................................. 45

3.9.1 Optical Inspection of BGA components after Dipping ...................................... 45

3.10 Features in combination with SW 605 and SW 701 (V5.2) .............................. 45

3.10.1 Virtual PCB Stack for future station software versions ..................................... 45

3.10.2 Higher nozzle capacity on SIPLACE D4 .......................................................... 45