00196920-07_SIPLACE_Pro_FeatureDescription_DE_EN.pdf - 第172页

SIPLACE Pro Fe ature Des cription Ausgabe 05/2014 Edit ion 172 The LED O ffset Cam era (47) 19x19 f lip chip cam era has to be se lected in the Setup Editor . Figure 9- 46 : Sel ecting camera ty pe NOTICE Cam era types 4…

SIPLACE Pro Feature Description Ausgabe 05/2014 Edition

171

A warning will be displayed if the placement list contains component placement positions for which

no matching reference designator can be found in the BOM file. Either the concerned placement

list can then be corrected in SIPLACE Pro Desk or the concerned component placement positions

can be omitted.

By clicking the Reevaluate button, the corrected entries will be transferred and checked by the

BOM Merger.

Before the new data gets inserted into the placement list via the Import button, a copy of the

placement list may be optionally created by clicking the Make a back-up copy of Placement List

button.

9.3.18 Aligning (LED) Components

If the corresponding hardware has been installed, components can be aligned with the new LED

Offset Camera (47) 19x19 camera type. Surface features such as e.g. illuminated areas of LED

components, can then be centered corresponding to the placement position. This function is

supported together with the CPP placement head as of this SIPLACE Pro version.

Example Process with LED component:

The LED component is picked up and put on a glass plate on camera 47. First, it will be measured

from the bottom by this camera and then from the top by the PCB camera. The result of the

measurement from the bottom is starting basis for the measurement from the top. Thus, an offset

of the illuminated area to the component connections is determined. After that, the LED component

will be picked up from the glass plate and be placed with the determined offset so that the

illuminated area is centered corresponding to the placement position and not, as usual, aligned to

the connection leads.

The function can be enabled in the Align column under the Placement List – Placements tab in

the Placement List Editor.

Figure 9-45: Enabling alignment

SIPLACE Pro Feature Description Ausgabe 05/2014 Edition

172

The LED Offset Camera (47) 19x19 flip chip camera has to be selected in the Setup Editor.

Figure 9-46: Selecting camera type

NOTICE

Camera types 47 and 25 have to be installed at the same place. I.e., these camera types

cannot be installed at the same location simultaneously.

SIPLACE Pro Feature Description Ausgabe 05/2014 Edition

173