00196920-07_SIPLACE_Pro_FeatureDescription_DE_EN.pdf - 第50页

SIPLACE Pro Fe ature Des cription Ausgabe 05/2014 Edit ion 50 4.1.2 New Nozzles and Nozzle Series Object T ype Name D escrip tion The f ollowing no zzles are a vailabl e for the C PP head. Nozzle Ser ies Name 20xx 2003 C…

SIPLACE Pro Feature Description Ausgabe 05/2014 Edition

4 Feature Description SIPLACE Pro V6.xx

Object Type Name Description

New and modified Machine Support (V6.xx)

SIPLACE Pro 6.0 supports the following machine modules:

● Collect&Pick&Place Head (CPP-Head)

● Quad Lane PCB Conveyor

4.1 CPP Head Support

The CPP head (Collect&Pick&Place) is able to place both small and big components.

Components with dimensions of up to 32 x 32 mm can be placed using the Collect&Place mode.

Components with dimensions of up to 40 x 50 mm can be placed using the Pick&Place mode.

Furthermore, it is possible to place components with heights of up to 11.5 mm.

4.1.1 New Hardware Components in the Setup Editor

The Setup Editor provides new hardware options for configuring the CPP head.

Object Type Name Description

Head Type CPP 12 2xxx CPP-Head with 12 segments

Nozzle Changer

NC CPP 20xx 2x3 Nozzle changer for X-series machines

for nozzle series 20xx.

NC CPP 20xx28xx 2x3 Nozzle changer for X-series machines

for nozzle series 20xx und 28xx.

NC CPP 20xx 2x2 Nozzle changer for X4i on location 2 and

4 for nozzle series 20xx.

NC CPP 20xx28xx 2x2 Nozzle changer for X4i on location 2 and

4 for nozzle series 20xx und 28xx.

Nozzle Magazin

CPP12 20xx Nozzle magazine with 12 pockets for

nozzle series 20xx.

CPP 9 28xx Nozzle magazine with 9 pockets for

nozzle series 28xx.

SIPLACE Pro Feature Description Ausgabe 05/2014 Edition

4.1.2 New Nozzles and Nozzle Series

Object Type Name Description

The following nozzles are available for the CPP head.

Nozzle Series Name

20xx

2003 CPP

2004 CPP

2005 CPP

2006 CPP

2007 CPP

2020 CPP

2021 CPP

2032 CPP

2033 CPP

2034 CPP

2035 CPP

2036 CPP

2037 CPP

2038 CPP

2039 CPP

28xx

2817 CPP

2820 CPP

2821 CPP

4.1.3 Camera Types used and Component Sensor

In the Setup Editor the following camera types can be configured for the CPP head.

Object Type Name Note

Component Camera

RV Camera X (28) 24.2x24.2

RV Camera X (29) 32x32

RV Camera X (38) 28x28

IC Camera X (33) 66x50

Component Sensor CPP Cam COMP Sensor

SIPLACE Pro Feature Description Ausgabe 05/2014 Edition

4.1.4 Calculating the Mass of Component Shapes

Object Type Name Description

In the Component Shape Editor: the Component Shape tab shows the calculation of the mass for

the component shapes.

For a safe placement sequence in the Collect&Place mode the mass of a component must be

taken into account. Based on the geometrical component dimensions (without leads) and a given

calculation formula SIPLACE Pro determines this value automatically. If due to the component

dimensions the automatic mass calculation produces a significantly heavier component than the

actual one (e. g. if the cooling element is hollow), you can enter the mass value manually.

4.1.5 Reduced Acceleration of Component Shapes

The acceleration value for the z axis is now taken into account during upwards and downwards

movements. In the Component Shape Editor: the Acceleration tab shows tow new columns: Z

Axis Up (g) and Z Axis Down (g).

When assigning new nozzles to component shapes SIPLACE Pro is able to calculate the

acceleration values automatically. In the Component Shape Editor: the Nozzles tab provides the

Automatic calculation of reduced accelerations option. In the Component Shape Editor: the

Accelerations tab shows new columns with the "recommended" values for z and star axis.

4.1.6 Reworked Upgrade Tool for Component Shapes and Fiducials

The Component Shape and Fiducial Upgrade for SIPLACE Vision tool was reworked. The new

CPP head nozzles and the CPP component sensor are supported. An acceleration value for all

component dimensions is calculated based on a globally determined density. If this value differs

from the maximum possible acceleration value at the head it can be accepted or rejected

correspondingly in a dialogue.

By means of the new filter function it is now possible to make a specific selection between all

nozzles of series 20xx/28xx and cameras. Optionally, newly calculated accelerations can be

displayed first and then be confirmed or rejected.

For detailed information please refer to the online help in SIPLACE Pro Desk.

4.2 Support of Station Software 702.xx

SIPLACE Pro 6.0 supports station software 702.xx on the machine types X2, X3, X4 and X4i.

This ensures the following basic functions:

● The C&P20 head can be set up at all locations.

● The CPP head can be set up at all locations.

● The Twin Head and Twin Head HF (High Force) can be set up at all locations of X2, X3 and

X4machines.

● The Linear Dipping Unit (LDU) is supported for C&P20 and CPP head.

● The complete X feeder scope is supported.