00196920-07_SIPLACE_Pro_FeatureDescription_DE_EN.pdf - 第86页

SIPLACE Pro Fe ature Des cription Ausgabe 05/2014 Edit ion 86 7.4.7 Multiple tra y s per l evel for MT C W hen creating ne w setups for the m atrix tr ay feeder ( MTC), m ultiple tra ys per le vel were p ossibl e as a de…

SIPLACE Pro Feature Description Ausgabe 05/2014 Edition

7.4.4 Setups have fewer empty tracks

When configuring a setup in the past, individual empty tracks could occur between configured

feeders or empty garages (e.g. when using 2x8 mm X feeders) sometimes arose. The Optimizer

has added an extra calculation step to ensure that significantly fewer empty tracks or garages

occur.

7.4.5 Nozzle usage shown for cluster jobs

After successful optimization of cluster jobs, which have been calculated with SiCluster

Professional, the nozzles needed for production can be shown.

This view can be accessed via the Nozzle Usage tab in the Statistics dialog of the

Run & Results tab.

7.4.6 Data Maintenance Tool

The upgrade tool for component shapes and fiducials has been revised and renamed to Data

Maintenance Tool. It now offers a state-of-the-art, intuitive user interface.

Component shapes, components, fiducials, setups and trays can be processed with this tool. The

interface now enables you to locate, display and modify objects based on specific criteria.

For details, refer to the Online Help.

SIPLACE Pro Feature Description Ausgabe 05/2014 Edition

7.4.7 Multiple trays per level for MTC

When creating new setups for the matrix tray feeder (MTC), multiple trays per level were possible

as a default. The checkbox "Support Multiple Trays Per Level" in the Setup Editor was always

enabled as a default. In future, this checkbox is disabled as a default, to reduce any negative

influence on the production process. This setting will only affect new setups.

7.4.8 Setup names

The way in which setup names for jobs or SiCluster jobs are formed can be individually set. The

names are either derived from the name of the initial setup or from the name of the job/cluster job.

This setting is offered in a new tab in the optimizer parameters dialog.

7.4.9 Multiple selection in the optimizer toolkit tables

Entries and settings now affect all selected lines. This makes work with recurring entries easier.

The cells, lines or columns can be selected with the standard Windows functions (mouse and Ctrl

key).

7.4.10 Flexible feeder type use of 8 mm X and 2x8 mm X

From SIPLACE Pro 9.3 onwards, the station allows you to use similar feeder types without the

need to modify the setup accordingly in the programming system. For example, it supports not only

the

2x8 mm X feeder but also the 8 mm X feeder.

NOTICE

In this case, you can only accept the modified feeder pitch and the angle in the SIPLACE

Pro database when uploading feeder data.

Other feeder data, such as offsets, pickup position (PuP) and feeder speed can only be

accepted if the setup concerned is described as it has been actually configured.

7.4.11 More than 255 fiducials

More than 255 different fiducials can now be described in SIPLACE Pro, although machines with

station SW versions 505 (and earlier) only support fiducials with numbers less than 256.

Fiducials which are not within the number range 1-255 are only supported by machines with

SIPLACE Vision systems i.e. all machines with station SW 60x and higher.

7.4.12 Operating modes I-Placement and board barcode

The placement mode I-Placement (or virtual I-Placement) can now also be used in board barcode

mode.

7.4.13 Select target folder for sub-objects when copying

When copying, e.g. a setup, the target folder can be selected for the tables to be copied. This also

applies to a component and the component shape to be copied plus to a board and the placement

lists to be copied.

SIPLACE Pro Feature Description Ausgabe 05/2014 Edition

7.4.14 Selection of column width in reports

The column width for the data shown in the report is now automatically calculated, although it can

also be manually calculated, increased or reduced in size as required.

7.4.15 Show head steps in 3D

The Recipe-Analyzer allows viewing the optimized head steps in a 3D view. This view can be

accessed using the symbol of the Recipe-Analyzer’s Head Steps tab.