00196920-07_SIPLACE_Pro_FeatureDescription_DE_EN.pdf - 第77页

SIPLACE Pro Fe ature Des cription Ausgabe 05/2014 Edit ion 77 6.5 S y stem Extensions "Where use d" and "Uses what" Functions The "W here used" f unction creates a l ist of the objects that …

SIPLACE Pro Feature Description Ausgabe 05/2014 Edition

6.4 New Optimization Features

Placement Modes Right Alternating / Left Alternating (Borrow Capacity)

You can use the asynchronous double conveyor operating mode "Right Alternating" for the

machine types: X4, X4i, SX2 and SX4. By means of optimization you use both placement heads of

a working area exclusively for assembling a product on the right conveyor (viewed in transport

direction of the station). The product on the opposite left conveyor is passed through.

"Left Alternating" is the analog function for the left conveyor side.

Optimize for Both Lanes (I Placement Mode)

The "Optimize for both lanes" option in the recipe editor supports assembling the same PCB on

both conveyor lanes within a line in the I placement mode.

As an alternative to I placement you can also use virtual I placement. The I placement mode is not

necessary for the whole line. The option can be combined with single stations with a synchronous

double conveyor or a single or flexible conveyor.

Identical Nozzle Changer Configuration

In SiCluster Professional it is optionally possible to create an identical nozzle changer configuration

for all setups. In the previous version this was only possible for constant tables using the runtime

intensive option for re-optimizing constant tables.

Dividing Tables Into Two Areas (Split Table Mode)

The Split Table mode is a setup concept for feeder change. In this mode, no changeover tables but

the single feeders are changed during placement at the line, when a setup change takes place.

While the next setup is arranged at one half of the table, placement goes on with the setup on the

other half of the table. If the next setup already has been completely arranged, a line downtime

during the setup change is prevented until the first recipe of the new setup shall be produced.

For the X2 and SX1 machine types the Single Side mode is offered, with which the setup can be

completely arranged on the left or on the right side of the line. During production the components

are only picked up from one side, while the next setup is prepared on the other side of the line.

With this setup concept fewer feeders are needed as with the setup concept with two changeover

table sets that needs a sufficient amount of feeders for the two changeover table sets. This setup

concept allows a flexible handling of rush jobs in the production. The component setup for the rush

job can simply be arranged on the free location, without having to tear down the current setup at

the line.

Restriction:

The Split Table mode reduces the available location capacity for a setup. If family setups are used,

fewer products can be united to a family setup because of the Split Table mode. Thus, the Split

Table mode cannot be used for complex products that require the complete location capacity of the

line.

SIPLACE Pro Feature Description Ausgabe 05/2014 Edition

6.5 System Extensions

"Where used" and "Uses what" Functions

The "Where used" function creates a list of the objects that use the selected object. With the new

"Uses what" function you get a list of the objects that are being used.

Time Stamp

You can now see the date and time stamp of the last modification for each object. The last

modification date with regard to all referenced objects is now displayed among the object

properties.

64 Bit Operating Systems

SIPLACE Pro is a 32 Bit application. But from version 8.0 onward it can be installed on 64 Bit

operating systems and it can use 64 Bit databases under these operating systems.

Nozzle Outline Descriptions

Customer specific special nozzles can be described via the outline (radius and Y position) in the

Nozzle Editor of the Desk.

Display of the Build Time

This time value that is now displayed as an addition of the optimizing results corresponds to the

time between the start of the fiducial measurement until the end of the assembly of this PCB

(according to PC 9850 standard). SIPLACE OIS V8.0 and SIPLACE Explorer V2.7 also show the

build time.

SIPLACE Pro Feature Description Ausgabe 05/2014 Edition

7 Feature Description SIPLACE Pro V9.xx

NOTICE

The SIPLACE Pro 9.0 and 9.1 versions have not been released.

7.1 New Stations and Tables (V9.2)

Object Type Name Description

Station types CA3

CA4

New Chip Assembly with SIPLACE Wafer

System (SWS)

DX1

DX2

DX4

One gantry

Two gantries

Two working areas with two gantries

each, equipped with a single or dual

conveyor.

X4T

X4iT

Placement machine X4 or X4i with

overwidth dual conveyor

Table types DX Table 34 X Fixed table with 34 tracks, start track

always uneven (1, 3, 5, …)

DX Table WPC 60 X Fixed table for WPC

DX Table 40 X Fixed table with 40 tracks, can also be

used for LED placement on station type

X4, start track always uneven (1, 3, 5, …)

DX Table 60 X Fixed table with 60 tracks, start track

always uneven (1, 3, 5, …)

DX Change Over Table 34 X Changeover table with 34 tracks, start

track always uneven (1, 3, 5, …)

DX Change Over Table WPC 60 X Changeover table for WPC

DX Change Over Table 40 X Changeover table with 40 tracks, can also

be used for LED placement on station

type X4, start track always uneven (1, 3,

5, …)

DX Change Over Table 60 X Changeover table with 60 tracks, start

track always uneven (1, 3, 5, …)