00196920-07_SIPLACE_Pro_FeatureDescription_DE_EN.pdf - 第10页
SIPLACE Pro Fe ature Des cription Ausgabe 05/2014 Edit ion 10 Product Release 11.1 09 - Dec - 13 11.2 08 - Ma y - 14
SIPLACE Pro Feature Description Ausgabe 05/2014 Edition
9
1 SIPLACE Pro Feature Description
This document contains a description of all new features of the SIPLACE Pro 4.xx – 11.xx versions:
● Chapter 2: Feature Description SIPLACE Pro V4.xx on page 11.
● Chapter 3: Feature Description SIPLACE Pro V5.xx on page 31.
● Chapter 4: Feature Description SIPLACE Pro V6.xx on page 49.
● Chapter 5: Feature Description SIPLACE Pro V7.xx on page 60.
● Chapter 6: Feature Description SIPLACE Pro V8.xx on page 74.
● Chapter 7: Feature Description SIPLACE Pro V9.xx on page 78.
● Chapter 8: Feature Description SIPLACE Pro V10.xx on page 88.
● Chapter 9: Feature Description SIPLACE Pro V11.xx on page 133.
NOTICE
If not differently described, the features of the previous versions are contained in the
higher versions.
Product Release
4.0 04-Jul-06
4.1 19-Feb-07
4.1 SP1 06-Aug-07
5.0 26-Jun-07
5.1 28-Jan-08
5.2 06-Aug-08
5.2 SP1 05-Dec-08
6.0 16-Feb-09
7.0 22-Jun-09
7.1 11-Dec-09
7.1 SP1 30-Apr-10
8.0 07-May-10
8.0 SP1 11-Jan-11
9.2 28-Feb-11
9.3 01-Aug-11
10.0 16-Apr-12
10.1 03-Dec-12
10.1 SP1 04-Mar-13
SIPLACE Pro Feature Description Ausgabe 05/2014 Edition
10
Product Release
11.1 09-Dec-13
11.2 08-May-14
SIPLACE Pro Feature Description Ausgabe 05/2014 Edition
11
2 Feature Description SIPLACE Pro V4.xx
2.1 Hardware Features (V4.0)
2.1.1 SIPLACE D3 and SIPLACE D4
SIPLACE Pro 4.0 supports the new SIPLACE D series machines SIPLACE D4 und SIPLACE D3.
SIPLACE D series is characterized by following features:
– Stations of the SIPLACE D series can be combined with any other station available in
SIPLACE Pro 4.0 except for C series stations.
– SIPLACE D series machines are running with station software 602 and are supported by the
vision system SIPLACE Vision 3.2.
– SIPLACE Pro supports for all nozzle changers of the D series the pocket wise nozzle
configuration.
– SIPLACE D series machines support change over tables of the S feeder generation (Change
Over Table 72 for SIPLACE D4 and Change Over Table 90 for SIPLACE D3). On the SIPLACE
D3 at location 2 the MTC 2 is also supported.
– SIPLACE D series is not running with the C&P20 head.
2.1.2 3 x 8 mm 0201 S mm Feeder on all stations placeable
The 3 x 8 mm 0201 S mm could be setup on all stations. If the feeder is used for 0201 placement,
you have to make sure that the station is able to measure tape pocket fiducials.
NOTICE
Please consider that the 3 x 8 mm 0201 S mm feeder can’t be used for 0201 placement
on SIPLACE S25 and all stations running station software less then 502.
For more details on the 0201 placement please refer to the Manual for Placing 0201 Components
(Art. No. 00191667-04).
2.1.3 Teaching Pocket Fiducials
To increase the accuracy of picking up very small components (e.g. 0402) you could measure
component tape pockets on the station (pocket fiducials).