00196920-07_SIPLACE_Pro_FeatureDescription_DE_EN.pdf - 第39页
SIPLACE Pro Fe ature Des cription Ausgabe 05/2014 Edit ion 39 enables and disables the download of partia l setup f or the m arked line/rec ipe. T hese icons are only poss ible dur ing m anual recipe s election . switche…
SIPLACE Pro Feature Description Ausgabe 05/2014 Edition
38
Parameter dialogue with the new option in OL2
3.3.3 Save Optimizer SPOT Files in a Separate Default Folder
In SIPLACE Pro 5.0 the SPOT files created by the optimizer are saved in a default folder SPOT or
in a different user-specific folder. For more details please refer to the online help.
3.4 Features of LC GUI (V5.0 xx)
3.4.1 Download of Partial Setups
SIPLACE Pro 5.0 enables a download of partial setups. First of all you have to activate the
download of partial setups via Configuration -> Download -> Partial Setup. The setups which are
sent to the stations contain only those components which are needed for the selected recipes. The
recipe selection can be done manually or refers automatically to the downloaded recipe. For more
details please refer to the online help.
Restrictions:
– Asynchronous dual conveyor: If a recipe is being downloaded to a conveyor lane and the same
or another recipe has already been downloaded to the other lane in dual asynchronous mode,
there can be a conflict if the filtered partial setups differ. In order to solve this conflict you have
to download the recipes for both conveyor lanes. The option "Avoid redistributing components"
avoids that the line is completely emptied.
– The barcode mode supports the manual recipe selection only since the line control does not
know which board type is currently in the line.
– If in barcode mode the manual recipe selection is changed there can be a conflict that the
filtered partial setup changes. All active recipes have to refer in barcode mode to the same
filtered partial setup. In order to solve this conflict all active recipes have to be downloaded
together. The option "Avoid redistribution of components" avoids that the line is completely
emptied.
SIPLACE Pro Feature Description Ausgabe 05/2014 Edition
39
enables and disables the download of partial setup for the marked line/recipe. These
icons are only possible during manual recipe selection.
switches over to another recipe to be produced (job or production schedule).
3.5 Features in combination with Station Software 605 and 701 (V5.1)
3.5.1 Support of SIPLACE Machines with Station Software 605 and 701
SIPLACE Pro 5.1 supports the SIPLACE machine types of X Series and D Series running with the
new station software 605 as well as the SIPLACE X4i running with station software 701.
You find a more detailed list in Appendix C: Platform – Station Software – Machine.
SIPLACE Pro 5.1 supports a new version of the vision system on all stations running with station
software 605 or 701.
NOTICE
In SIPLACE Pro 5.1 and station software 605/701 the position of the fixed conveyor side
is given by SIPLACE Pro. This implicates that the user has to enter in SIPLACE Pro the
position of the fixed conveyor side in the line editor when upgrading from 60x to 605
before the first program download. This prevents the conveyor sides travelling
unexpectedly to another position.
SIPLACE Pro Feature Description Ausgabe 05/2014 Edition
40
3.5.2 Support of SIPLACE X4i with Station Software 701
SIPLACE X4i machine type is running with station software 701 only. The SIPLACE X4i is
characterized by the rotated gantries at location 2 and 4 as well as by the new nozzle changer NC
C&P 20 10xx 2x2 equipped with 4 magazines. Each magazine has 12 pockets. On the SIPLACE
X4i 2 different tables can be used: Tabe 34X and Table 40X. Table 34X has to be used at location
2 and 4 since the C&P20 head cannot pick components on tracks 1-6. Table 40X is used by default
at location 1 and 3 since the head can pick components anywhere.
The SIPLACE X4i machine types (can be configured with all machines of the X and D series in one
line.
X4i restrictions:
Following options are not supported on the SIPLACE X4i (Station Software 701)
– Whispering down the Machine
– Whispering down the Line
– Long Board Option
– PCB Barcode Operation
– Productivity Lift: instead of productivity lift the 3
rd
lane can be used.
– Stationwise download
3.5.3 I Placement with SIPLACE X4i
SIPLACE X4i enables I Placement that means the independent placement of both placement
heads within one placement area. I Placement is a placement mode for C&P heads on a SIPLACE
X4i. I Placement is a placement mode for C&P heads of the X4i. I Placement is activated via Setup
-> Station -> Tab: Transport (I Placement or Alternating). The shorter distance to the gantry and the
independent placement in the placement area lead to a higher performance.
3.5.4 Increased Placement Performance for Twin Head – Benchmark 5000 cph
With SIPLACE Pro 5.1 the Twin Head on X series machines and on SIPLACE D3 machines can
place up to 5000 cph.
3.5.5 WPC 4 for SIPLACE D3, X3, X2 Machines with S Tables
SIPLACE Pro 5.1 supports the wafflepack changer WPC 4 on SIPLACE machines D3, X3 and X2
with new WPC 4 D3/X and the new table type "Table WPC 90".
The new table type can be setup at locations 2 and 4 of SIPLACE X3 and at location 3 of SIPLACE
D3 and X3. In contrast to the currently available WPC the WPC 4 D3/X can only be setup on
tracks 25-90. Tracks 1-24 are reserved for other feeder types.
3.5.6 Support of Reject Feeder with X Adapter
With SIPLACE Pro 5.1 the Reject Feeder (Reject Conveyor AX) can be used for the X series (X2,
X3, X4) with station software 605.