00196920-07_SIPLACE_Pro_FeatureDescription_DE_EN.pdf - 第72页

SIPLACE Pro Fe ature Des cription Ausgabe 05/2014 Edit ion 72 5.21 Restricti ng the Amount of Data during Import /Export of XML Files You can c hange the defau lt setting of 50 MB yte under t he Tools => S ettings =&g…

SIPLACE Pro Feature Description Ausgabe 05/2014 Edition

5.19 The SiCluster Optimization Tool (Option)

In SIPLACE Pro 7.1 the existing Cluster Job Wizard is replaced by the SiCluster optimization

tool. A license is required to use these functions.

Start SIPLACE Pro Optimizer Toolkit => SiCluster.

SiCluster is an optimization tool with a reduced scope of functions compared to SiCluster

Professional. In SiCluster it is not possible to optimize constant tables when creating setups.

With SiCluster you generate a cluster job instead of a job. In doing so, the PCBs are distributed to

several (as few as possible!) setups, taking all side conditions into account. If it is your task to

determine the smallest number of setups for your products to be produced, you use the SiCluster

optimization tool.

Refer to the online help of the SIPLACE Pro Optimizer Toolkit for more detailed information.

5.20 Setting the Specific Feeder Pitch

In the component, the component shape or the setup, it is now possible to set a feeder specific

value for the Feeder Pitch. That means that the Feeder Pitch for component shape or component

can be set differently for each assigned feeder. In addition, the Feeder Pitch can now be changed

in the setup without having to change the values in the component editor or the component shape

editor.

The feeder pitches that are allowed for the feeder are presented in a list. If other values or zero is

being entered, this is indicated by an appropriate icon.

SIPLACE Pro Feature Description Ausgabe 05/2014 Edition

5.21 Restricting the Amount of Data during Import /Export of XML

Files

You can change the default setting of 50 MByte under the Tools => Settings => General settings

tab.

5.22 Optimizing of Standard and Long Boards

If, in one setup, normal PCBs were produced with the "Long board" option, problems during

optimization could occur. It is now possible, to optimize long and normal PCBs together in the

same initial setup. The "Long board" option can now be enabled for normal PCBs.

5.23 Determining the Load Factor of the Placement Areas During

Optimization

During optimization, the calculation of the placement content in the placement heads can be

influenced by the Load Factor. This means, that the optimization will distribute more or fewer

placements to the respective placement heads in the placement area.

You can enter the Load Factor in the Setup Editor => Location => Simulation tab.

5.24 Improving the Usability of SIPLACE Pro Desk

5.24.1 Deleting Directories in the Tree Structure

If a directory is deleted using this function, all objects in all subdirectories are deleted, too. There is

the possibility to delete only those objects and their subdirectories that are no longer used.

SIPLACE Pro Feature Description Ausgabe 05/2014 Edition

New and Modified Functions (V7.1 SP1)

5.25 Improving the Usability

5.25.1 Assigning Alternative Feeders in the Table Editor

If alternative feeders are entered in the component shape or the component, these are displayed in

the context menu of the table list and can be newly assigned there. If the alternative feeder cannot

be set up on the table (e. g. for there is not enough space), this feeder is copied into the clipboard.

The user can change the table assignment manually and put the feeder from the clipbaord onto the

table later on.

5.25.2 Show Non Collision Nozzles Types

The Precedence Finder now shows Non Collision Nozzles Types.

5.25.3 Replace of Nozzles

Using the Component Shape and Fiducial Upgrade Tool one can replace assigned nozzles for all

of the existing component shapes.

5.25.4 Stationwise Download

The function stationwise download is now supported for station software from 703.xx onward.

5.26 Identical Nozzle Changer Configuration

In SiCluster Professional it is optionally possible to create an identical nozzle changer configuration

for all setups. In the previous version this was only possible for constant tables using the runtime

intensive option for re-optimizing constant tables.

5.27 Multi-Clusterjob-Optimizer

The Multi-Clusterjob-Optimizer is an efficient tool with which you can process cluster jobs in batch

mode. The single cluster jobs get inserted into the cluster job list from the cluster job tree and can

be optimized in the desired order.