00196920-07_SIPLACE_Pro_FeatureDescription_DE_EN.pdf - 第45页

SIPLACE Pro Fe ature Des cription Ausgabe 05/2014 Edit ion 45 3.9 Features of SIPLACE Vi sion (V5.1) 3.9.1 Optical Inspec tion of BGA components a fter Dipping In SIPLAC E Pro 5. 1 the co mponent shape ed itor has t he o…

SIPLACE Pro Feature Description Ausgabe 05/2014 Edition

3.8 Features of LC GUI (V5.1)

3.8.1 Avoid redistributing components in Integrity Check

In the LC GUI the function "Avoid redistributing components…" is expanded.

The options "Avoid redistributing components…" and "Avoid changing placement sequence during

last optimizer run" require the same placement sequence and thus the same placement time.

Fig. Integrity Check

NOTICE

If the placement sequence could not be kept (i.e. by setup of an additional component),

the user will receive an error message.

NOTICE

In some cases there are different optimizer results for optimizer level OL2 and OL3.

– Boards with a lot of panels with fiducials

– Long Board Option (LBO) in step mode

Workaround: Before optimization or download select following options from the menu.

– Desk: Job Editor -> Configure… -> Siemens Optimizer Parameter

Optimization: Optimizer Level

– "Avoid redistributing placement position for each head" and

– "Do not change placement sequence"

– LC GUI: Integrity check: "Avoid redistributing components…"

SIPLACE Pro Feature Description Ausgabe 05/2014 Edition

3.9 Features of SIPLACE Vision (V5.1)

3.9.1 Optical Inspection of BGA components after Dipping

In SIPLACE Pro 5.1 the component shape editor has the option to check components after dipping

(Component -Editor -> Extended -> Inspect after dipping). This option is only valid for BGA

components and non-standard components. This option checks if all balls are covered with flux

medium or not.

The orientation of the component at the nozzle is checked.

Restrictions of the option "Inspect after dipping":

– This option is only for BGA and non-standard components.

– This option is only valid if "Dipping Vision" is selected.

This option requires station software 605 (with SIPLACE Vision V35) only.

3.10 Features in combination with SW 605 and SW 701 (V5.2)

3.10.1 Virtual PCB Stack for future station software versions

The new feature "Virtual PCB Stack" allows production of two boards with the same width but

different placements in one job. This option is valid for future software versions higher than SW 605

and SW 701.

In the recipe editor you have to define two boards on one conveyor lane. After having activated the

processing mode "Virtual Stack" the two boards lie on top of each other. Each board is provided

with a so-called "Detection Inkspot". By means of this inkspot the boards differ from each other and

by means of this marking the station loads the right placement program.

3.10.2 Higher nozzle capacity on SIPLACE D4

On SIPLACE D4 there is now a second nozzle changer row. This means you could use two nozzle

changers per location instead of one. This is valid for C&P heads with station software 605.

3.11 Features in SIPLACE Pro Desk (V5.2)

3.11.1 Simplified search function for opened objects in the editor

Each editor is provided with an object search function in order to simplify the search for objects you

are working on.

The opened object is localized and shown in the tree view. With the help of this function you quickly

find the opened in the tree view.

SIPLACE Pro Feature Description Ausgabe 05/2014 Edition

3.12 Features in SIPLACE Pro Optimizer (V5.2)

3.12.1 Display of travel areas and stopper positions in the Recipe Analyzer

The graphic display of all objects contained in a recipe is optimized in order to visualize even better

the numerous hardware combinations of placements heads, locations, travel areas and station

types.

– For stopper positions

– For travel areas for heads and segments

For the time being these features are only available in the licensed recipe analyzer of the SIPLACE

Pro Optimizer

You find more detailed information in the online help.

3.12.2 Memory optimized SIPLACE Multi Job Optimization

In the settings of the Multi Job Optimization of SIPLACE Pro Optimizer you can choose among two

options for optimizing long job lists:

– Main process: All jobs run in one process.

– Separate process: Each job runs in a separate process. For each job the whole virtual memory

space is available (default setting).

3.12.3 New sorting criteria for SIPLACE Multi Job Optimization

The Multi Job Optimization of SIPLACE Pro has following additional columns:

– Runtime

– Recipe Count

– Initial Setup

– Line

– Feeder Inventory

– Restriction

– Optimization Date