JUKI贴片机错误代码集合.pdf - 第123页
OK button: Moves the head to the component di sposal position. E506401 “ Cannot return component of %s. Tr ash component? ” “ %s 的组件不能归还， | 是否废弃它？ ” [Cause] This message appears when star ting a production if a compon en…
E506201 “You need to delete the file if you do not resume the production from the last illegally suspended
position. | [Circuit No. : %d Step No. : %d]| Would you like to delete the file?”
“在生产基板中，如果不想执行前一次异常退出时|[电路号: %d 步骤号: %d]|的继续生产，
有必要删除它，|是否删除？”
[Cause]
This message appears if the production program is a resumable production when starting a
production.
(Other than 2030)
|Resumptive production starting position of each station.
[Treatment]
Yes : Starts the production from the placement point which got illegal abortion last time.
No : Will not resume the production but start a normal production that is set in the Production
Condition.
E506202 “Would you like to resume the production? The last suspended position [Circuit No. : %d Step No. :
%d]”
[Cause]
This message appears if the production program is a resumable production when starting a
production.
(Other than 2030)
|Resumptive production starting position of each station.
[Treatment]
Yes : Starts the production from the placement point which got illegal abortion last time.
No : Will not resume the production but start a normal production that is set in the Production
Condition.
E506300 “Is the component supply reset?”
“是否要补满组件？”
[Cause]
This message appears when 'replenishment button' on the Pause screen is pressed.
[Treatment]
Yes : Replenishes components.
No : Will not replenish components.
E506400 “The %s component is a protective component. Please remove the component”
“%s 的组件是保护组件，请取下组件。”
[Cause]
This message appears before disposing the component if a protective component is being picked by a
head when starting a production.
[Treatment]
OK button: Moves the head to the component disposal position.
E506401 “Cannot return component of %s. Trash component?”
“%s 的组件不能归还，|是否废弃它？”
[Cause]
This message appears when starting a production if a component is being picked by a head, the
component is not a protective component, and the component disposal is executed for the component
that is UN-returnable.
[Treatment]
Yes : Disposes the component.
No : Resumes the production without disposing the component.
E506500 “More than one component are selected. Would you like to try execute Verification inspection for
the first component listed?”
“多数组件被选择，|是否要显示第一组件数据的编辑对话框？”
[Cause]
This message appears if several components are selected to be verified when executing the
Verification inspection for the retry list.
[Treatment]
Yes : Executes the Verification inspection for the first component listed.
No : Will not executes the Verification inspection.
Q506600 “Air has not been supplied.|Would you like to begin production though the PWB may become
incomplete?”
“气压被下降，|可能发生贴片遗漏现象，是否开始生产？”
E507602 “This program is not available for measuring general placement offset.”
“不是贴片综合偏差生产用的生产程序。”
E507606 “Auto.Select exists in the Place data. |Production can not be executed.”
“贴片数据内存在自动选择，|不能执行生产。”
Q506700 “There is no component that ran out.|Would you like to begin production?”
"存在组件短缺的组件，|是否开始生产？"
Q506701 “Fail in the measurement of the height of component.|Would you like to begin production?”
"测量组件高度失败，|是否开始生产？"
Q506702 “Aborted in the measurement of the height of component.|Would you like to begin production?”
"测量组件高度被中断，|是否开始生产？"
Q506711 “Failed in verification of component.|Would you like to begin production?”
" 数值检查失败，| 是否开始生产？ "。
Q506712 “Aborted in verification of component.|Would you like to begin production?”
" 中断数值检查，| 是否开始生产？"
Q506721 “Failed in SOT direction of component.|Would you like to begin production?”
"SOT 方向检查失败，|是否开始生产？"
Q506722 “Aborted in SOT direction of component.|Would you like to begin production?”
"SOT 方向检查被中断，|是否开始生产？"
Q506800 “The total number of placements( %d) differs form the number( %d) set in the Production
Condition.|Would you like to begin production?”
"总贴片数( %d)与生产条件上设置的末行数( %d)不同，|是否进行生产？"
Q506801 “The restart production is set only as for a %s. A %s does not do the restart production.|Would you
like to begin production?”
"只有%s 被设置成重新开始生产。%s 不能重新开始生产，|是否进行生产？"
Q506802 “Only the point equipped with the circuit setting the restart position is set. |When neither is set, the
restart production is not done.|Would you like to begin production?”
"电路或贴片点中，只有一项设置了重新开始位置，|如果两个项不都设置，就不能进行重
新生产。|是否开始生产？"
Q506803 “The position where it is restarted that it is not in the prod. station is set.|If the position where the
prod. station side is restarted is not input, the restart production is not done.|Would you like to begin
production?”
"设置了生产运行站台上不存在的重新开始位置，|如果不输入生产运行站台的重新开始位
置，就不能进行重新生产。|是否开始进行生产？"
Q506804 “The specification of the production execution station (%s) and the Trace execution station is
different.|You do not trace when starting as it is.Is production executed?”
"生产运行站台(%s)与跟踪运行站台(%s)不同，|这种设置不能执行跟踪，是否进行生产？"
Q506805 “The production execution station (%s) is a single station and the station specification of the trace
(%s) is both station.|Is production executed though the station where the trace is not executed is
generated?”
"生产运行站台是一个站台(%s),但跟踪站台指定了两个站台。|即使站台不执行跟踪，也进
行生产？"
Q506900 “%s has been set on the pick position.|Do you want to change the trays?”
"%s 置于吸取位置，|是否替换托盘？"