JUKI贴片机错误代码集合.pdf - 第411页
[Deal] Check the data (layer and nozzle information). E2916 Data i s incorrect ,so making for pairing pl acement data. " 不正常数据导致关系预备处理失败 。 " [Cause] A failure was found in the program data. [Deal] Correct the d…
W2903 “Optimization processing is being aborted. “
"优化过程失败。"
E2907 Pick data is not complete.
[Cause]
The function Opt3SimulParralelCreate returned error number 700.
[Deal]
Consult the manufacturer.
E2911 Data is incorrect ,so stop allocation pick data of MTC.
"不正常数据探测; MTC 位置分配失败。"
[Cause]
A failure was found in the MTC data.
[Deal]
Correct the part data and pick data (MTC), and retry the process.
E2912 Data is incorrect so stop calculation for placement number.
"不正常数据已经导致计算贴片数量失败。"
[Cause]
A failure was found in the program data.
[Deal]
Rebuild the program data.
E2913 Data is incorrect ,so stop calculation for placement peak point.
"不正常数据已经导致贴片最高点计算失败。"
[Cause]
A failure was found in the program data.
[Deal]
Correct the mounting data, and retry the process.
E2914 Data is incorrect, so stop allocation for number of picking.
"不正常数据已经导致依照选取顺序分配失败。"
[Cause]
A failure was found in the program data.
[Deal]
Correct the pick data, and retry the process.
E2915 Sorting for placement layer and nozzle number is abnormal end.
"贴片层同一吸嘴号处理不正常。"
[Cause]
A failure was found in the program data.
[Deal]
Check the data (layer and nozzle information).
E2916 Data is incorrect ,so making for pairing placement data.
"不正常数据导致关系预备处理失败。"
[Cause]
A failure was found in the program data.
[Deal]
Correct the data.
E2917 Memory is not enough at optimization feeder priority.
"在保护优先区域的进料器顺序处理过程中出现错误。"
[Cause]
Indicates insufficient free memory space.
[Deal]
Exit from other applications, and retry the process.
E2918 Data is incorrect , so stop processing for circuit repeat.
"不正常数据已经导致电路重复决定失败。"
[Cause]
A failure was found in the program data.
[Deal]
Correct the data.
E2931 Process for make feeder pair of parallel pick is abnormal end.
"同时选取进料器排版预先处理不正常终止"
[Cause]
The data is unavailable for optimization.
[Deal]
Consult the manufacturer.
E2932 Allocation for feeder pair of parallel pick is abnormal end.
"同时选取进料器排版处理不正常终止。"
[Cause]
The data is unavailable for optimization.
[Deal]
Consult the manufacturer.
E2933 Sorting for parallel pick feeder allocate is abnormal end.
"处理资料排架的同时选取进料器排版不正常终止。"
[Cause]
The data is unavailable for optimization.
[Deal]
Consult the manufacturer.
E2934 Allocation for parallel pick feeder is abnormal end.
"同时选取进料器优化处理不正常终止。"
[Cause]
The data is unavailable for optimization.
[Deal]
Consult the manufacturer.
E2935 Can't execute feeder optimization.
"最合适的进料器排版处理不可得。"
[Cause]
The data is unavailable for optimization.
[Deal]
Consult the manufacturer.
E2936 Data renewal is abnormal end.
"进料器更新过程被不正常终止。"
[Cause]
The data is unavailable for optimization.
[Deal]
Consult the manufacturer.
E2941 Sorting for placement layer and same nozzle is abnormal end.
"在贴片层同一吸嘴号处理时出现错误。"
[Cause]
The data is unavailable for optimization.
[Deal]
Consult the manufacturer.
E2942 Memory is not enough at making parallel pick table.
"在保护预备区域的选取表格处理过程中出现错误。."
[Cause]
Indicates insufficient free memory space.
[Deal]
Exit from other applications, and retry the process.
E2943 Making for parallel picking table.
"在处理选取表格决定同时出现错误。"