JUKI贴片机错误代码集合.pdf - 第184页

E604438 “ Axi s Driver:| T4-axis The position error exceeded the limit .” “ T4 轴错误 : 位置偏移量超过界限。 ” E604538 “ Axi s Driver:| RT1-axis The pos ition error exceeded the limit .” “ RT1 轴错误 : 位置偏移量超过界限。 ” E604638 “ Axi s Drive…

100%1 / 464
E604833 “Axis Driver:| RT4-axis failed motion stop.”
“RT4 轴错误: 停止失败。”
E604136 “Axis Driver:| T1-axis. The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“ T1 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E604236 “Axis Driver:| T2-axis. The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“ T2 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E604336 “Axis Driver:| T3-axis.The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“ T3 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E604436 “Axis Driver:| T4-axis. The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“ T4 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E604536 “Axis Driver:| RT1-axis. The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“RT1 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E604636 “Axis Driver:| RT2-axis.The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“RT2 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E604736 “Axis Driver:| RT3-axis. The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“RT3 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E604836 “Axis Driver:| RT4-axis. The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“RT4 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E604138 “Axis Driver:| T1-axis The position error exceeded the limit.”
“ T1 轴错误: 位置偏移量超过界限。”
E604238 “Axis Driver:| T2-axis The position error exceeded the limit.”
“ T2 轴错误: 位置偏移量超过界限。”
E604338 “Axis Driver:| T3-axis The position error exceeded the limit.”
“ T3 轴错误: 位置偏移量超过界限。”
E604438 “Axis Driver:| T4-axis The position error exceeded the limit.”
“ T4 轴错误: 位置偏移量超过界限。”
E604538 “Axis Driver:| RT1-axis The position error exceeded the limit.”
“RT1 轴错误: 位置偏移量超过界限。”
E604638 “Axis Driver:| RT2-axis The position error exceeded the limit.”
“RT2 轴错误: 位置偏移量超过界限。”
E604738 “Axis Driver:| RT3-axis The position error exceeded the limit.”
“RT3 轴错误: 位置偏移量超过界限。”
E604838 “Axis Driver:| RT4-axis The position error exceeded the limit.”
“RT4 轴错误: 位置偏移量超过界限。”
E604139 “Axis Driver:| T1-axis Amp fault error.”
“ T1 轴错误: Amp 故障。”
E604239 “Axis Driver:| T2-axis Amp fault error.”
“ T2 轴错误: Amp 故障。”
E604339 “Axis Driver:| T3-axis Amp fault error.”
“ T3 轴错误: Amp 故障。”
E604439 “Axis Driver:| T4-axis Amp fault error.”
“ T4 轴错误: Amp 故障。”
E604539 “Axis Driver:| RT1-axis Amp fault error.”
“RT1 轴错误: Amp 故障。”
E604639 “Axis Driver:| RT2-axis Amp fault error.”
“RT2 轴错误: Amp 故障。”
E604739 “Axis Driver:| RT3-axis Amp fault error.”
“RT3 轴错误: Amp 故障。”
E604839 “Axis Driver:| RT4-axis Amp fault error.”
“RT4 轴错误: Amp 故障。”
E604141 “Axis Driver:| T1-axis. The dac out error exceeded the limit.”
“ T1 轴错误 |DAC 输出超出界限。”
E604241 “Axis Driver:| T2-axis. The dac out error exceeded the limit.”
“ T2 轴错误 |DAC 输出超出界限。”
E604341 “Axis Driver:| T3-axis. The dac out error exceeded the limit.”
“ T3 轴错误 |DAC 输出超出界限。”
E604441 “Axis Driver:| T4-axis. The dac out error exceeded the limit.”
“ T4 轴错误 |DAC 输出超出界限。”
E604541 “Axis Driver:| RT1-axis. The dac out error exceeded the limit.”
“RT1 轴错误 |DAC 输出超出界限。”
E604641 “Axis Driver:| RT2-axis. The dac out error exceeded the limit.”
“RT2 轴错误 |DAC 输出超出界限。”
E604741 “Axis Driver:| RT3-axis. The dac out error exceeded the limit.”
“RT3 轴错误 |DAC 输出超出界限。”
E604841 “Axis Driver:| RT4-axis. The dac out error exceeded the limit.”
“RT4 轴错误 |DAC 输出超出界限。”
E605110 “Axis Driver:| Support table parameter error.”
“支撑台参数错误。”
E605210 “Axis Driver:| Right Support table parameter error.”
“右支撑台参数错误。”
E605310 “Axis Driver:| AWC parameter error.”
“自动调整基板宽度(AWC)参数错误。”
E605510 “Axis Driver:| Center motor parameter error.”
“中心马达参数错误。”
E605610 “Axis Driver:| Right Center motor parameter error.”
“右中心马达参数错误。”
E605111 “Axis Driver:| Station is not used.”
“没有选用左侧站点。”
E605211 “Axis Driver:| Station is not used.”
“没有选用右侧站点。”
E605112 “Axis Driver:| Support table failed originating.”
“支撑台的返回原点失败。”
E605212 “Axis Driver:| Right Support table failed originating.”
“右支撑台的返回原点失败。”