JUKI贴片机错误代码集合.pdf - 第407页
post-processing. [Deal] Selecting "Yes" opens the specified program fil e, enabling you to edit it, howev er, the reserved production program fil e becomes unavailable for production. S el ect ing "No"…
[Cause]
Appears if the MSL setup is started concurrently.
[Deal]
Restart the process after exiting from the MSL setup.
E1022 “Optimization processing start-up failed. “
"优化处理激活失败。"
[Cause]
Memory space is not sufficient.
[Deal]
Quit other running applications, then restart it.
E1023 “Window class registration failed. “
"分类窗口注册失败。"
E1024 “Layout display window creation failed. “
"规划显示窗口的创建失败。"
E1025 “Printing in another EXE is presently in progress, so printing cannot be done. “
"正在进行另一个 EXE 中的打印，打印不能进行。"
[Cause]
Whenever another application is printing a job, printing from the "Program Edit" function is
unavailable.
[Deal]
Restart printing after the application has completed its printing job.
E1026 “Illegal line configuration.Setup line configuration. “
"不合规定的线结构。< 设置线结构。"
[Cause]
No station was designated for the active line during the MSL setup.
[Deal]
Designate a station for the active line during the MSL setup.
E1223 This program has been producing.
[Cause]
The specified production program file is in production.
[Deal]
After completing the production, reload the file.
E1224 This program is reserved or suspended.
[Cause]
The specified production program file is reserved for production, but has not been produced or in
post-processing.
[Deal]
Selecting "Yes" opens the specified program file, enabling you to edit it, however, the reserved
production program file becomes unavailable for production. Selecting "No" returns the system to the
file loading process. Selecting "Cancel" discards the loading process.
E1234 Help initialization failed. Help function is not available.
[Cause]
You can select the output format.
[Deal]
Quit other running application running, then restart it.
W1501 <%s> already exists.Shall it be overwritten?
"已经存在,确定要覆盖吗？"
[Explanation]
Appears if naming and saving an existing program file is tried.
W1502 ata being created will be lost . Is it all right to terminate Windows?
"已经创建的数据将被丢失。要终止窗口吗？"
[Explanation]
Appears if exiting from Windows is tried without saving a program file which has been modified.
E2001 “Password is incorrect. “
"密码不正确。"
E2002 “MSL setup has already been started up. “
"EPU 的设置已经被激活。"
E2003 “File write-in failed. “
"写入文件失败。"
E2004 “Network ID specification is incorrect. “
"网络 ID 规格不正确。"
E2005 “MSL setup cannot be started up at the same time as other processing. “
"处理其它时不能同时激活 EPU 设置。"
E2006 “Arc net driver has not been started up. “
"还未激活弧型网络驱动程序。
"
E2007 “Station type has not been set. “
"没有设置位置类型。"
E2008 “Protect module is not connected. “
"没有连接保护模式。"
E2009 “Network ID is already used. “
"已经使用网络 ID。"
E2010 “Station Name is already used. “
"已经使用配置 ID。"
W2501 “Setting is updated.Shall it be saved? “
"设置被更新，需要保存吗？"
W2502 “Layout will be completely cleared.Is this OK? “
"将完全清除层设置，确定吗？"
W2503 “Settings will all be cleared.Is this OK? “
"清除所有的设置，确定吗？"
W2504 “Changes will all be aborted.Is this OK? “
" 所有改变将被放弃，确定吗?"
W2505 “Station side conditions have been obtained.Shall profile be updated? “
"已获得位置面情况，要更新剖面设置吗？"
W2506 “Station type is changed.Is this OK? “
"改变位置类型，确定吗？"
W2507 “Everything starting from the first incomplete line which appears will be cleared.Is this OK? “
"所有问题都是从第一个不完全线上开始的，它将被删除，确定吗？"
W2508 “Type of device is changed.Is this OK?
“
"改变设置类型，确定吗？"
W2509 “Current station profile will be deleted. OK? “
"删除当前位置的剖面。"
W2510 “Station cannot be deleted because it is already installed in the line. “
"因为已经安装在线上，位置不能被删除。"
W2511 “Preset station exists in front. “
"在前面事先调整的位置已经存在。"
W2512 “Mounter exists in front. “
"前面不存在贴片。"