JUKI贴片机错误代码集合.pdf - 第85页
A PWB was detected on the conveyor. [Treatment] Please removed the PWB on the conveyor. I318024 “ Remove the handknob .” “ 请取下 摇把。 ” E397001 ” Memory allocation error ” “ 分配内存发生错误 ” [Cause] The working space can not be s…
“YES” button will abort the process. “NO” button will resume the process.
Q317041 “Is the tray of MTS stored?”
“可能取出托盘。|是否储存 MTS 托盘？”
[Cause]
“Exit MTS control screen” was chosen with MTS tray was drawn out.
[Treatment]
“YES” will store the tray into MTS and exit the screen. ”NO” will exit the screen with MTS tray is
drawn out of MTS.
I318001 “Remove the component from %s”
“请取下%s 上的组件。”
[Cause]
The nozzle could not be returned to ATC since something, such as a component, was on the nozzle.
[Treatment]
Please remove the component off the head manually.
I318011 “Set online for MTC”
“请设置 MTC 联机状态。”
[Cause]
Failed to draw shuttle out from MTC since MTC was not online.
[Treatment]
Please make MTC online.
I318021 “Set online for MTS”
“请设置 MTS 联机状态。”
[Cause]
MTS was not online.
[Treatment]
Please make MTS online.
I318022 “Please close the door of MTS”
“请关闭 MTS 的机箱门。”
[Cause]
Failed to draw a tray out from MTS since MTS door was open.
[Treatment]
Please close the MTS door.
I318023 “Remove the PWB on Conveyor”
“请取下搬运轨道上的基板。”
[Cause]
A PWB was detected on the conveyor.
[Treatment]
Please removed the PWB on the conveyor.
I318024 “Remove the handknob.”
“请取下摇把。”
E397001”Memory allocation error”
“分配内存发生错误”
[Cause]
The working space can not be saved.
[Treatment]
Please add some more memory available to save the working space.
E397002”Shared memory open error”
“打开共享内存发生错误”
[Cause]
The shared memory could not be opened.
[Treatment]
Please contact our technical service dept. for information.
E397011”Return to home has not yet been completed”
“未结束返回原点。|请确认一下搬运轨道上是否没有 Head。|请确认一下基板传送是否正
常。”
[Cause]
The axis can not move until Home returning has been complete.
[Treatment]
Please press the ORIGIN switch to perform Home returning.
E397012 ”Servo is in the free state”
“伺服处于未使用状态。|请确认一下搬运轨道上是否没有 Head。|请确认一下基板传送是
否正常。”
[Cause]
The axis could not move since the servo is in the free status.
[Treatment]
In order to move the axis, please press the Servo Free switch to lock the servo.
E398001 “Memory allocation error”
“分配内存错误”
[Cause]
The working space can not be saved.
[Treatment]
Please add some more memory available to save the working space.
E398002 “Shared memory open error”
“打开共享内存错误”
[Cause]
The shared memory could not be opened.
[Cause]
Please contact our technical service dept. for information.
E398011 “There is no input character”
“没有输入字符。”
[Cause]
There was no character when you hit Enter key to define characters.
[Treatment]
Please enter characters.
E398012 “Input character has irregularities”
“输入非法字符。”
[Cause]
The letter strings had irregularities when defining the input.
[Treatment]
Please enter proper characters.
E398013 “Input value exceeds predetermined data range. (Data range: %d - %d)”
“输入值超过输入范围。|(输入范围:%d - %d)”
[Cause]
The value when defining the input exceeded the input range.
[Treatment]
Please enter the values that are within the range.
W398021 “Return to home has not yet been completed”
“尚未结束返回原点。”
[Cause]
The axis can not move until Home returning has been complete.
[Treatment]
Please press the ORIGIN switch to perform Home returning.
W398022 “Servo is in the free state”
“伺服处于未使用状态。”
[Cause]