JUKI贴片机错误代码集合.pdf - 第273页

Please re-install or version up the applicat ion. Please re-boot your machine. E630102 “ Vision Syst em: You tried to registe r an undefined component or mark ” “ 图像处理装置错误 :| 发现 未定义的组件或标记 ” [Cause] The format of the comm…

100%1 / 464
E630075 “The window frame does not fit in the screen”
“ViLib 错误:|窗口框超出画面”
[Cause]
The component outer shape window frame does not fit in the screen if it is rotated to the tracing
posture.
[Treatment]
The component is too large to trace.
E630076 “ViLibError:| VCS program checksum error”
“ViLib 错误:|图像(VCS)程序的 Check-Sum 错误”
E630077 “ViLibError:| VCS program flash write error”
“ViLib 错误:|图像(VCS)程序的闪存卡写入错误”
E630078 “ViLibError:| VME bus power is cut off.”
“ViLib 错误:|VMEBus 电源被关闭”
E630080 Vision system error:| Vision system error: ACK Response Base (Vision command result error).”
“图像处理装置错误:|图像处理装置错误:ACK 应答 Base(图像命令的结果错误)”
E630081 “There is not valid mark within the detecting window”
“图像处理装置错误:|在窗口中没有发现标记”
[Cause]
The light is not ON.
There is no mark.
[Treatment]
Please examine if the light gets on properly.
Please change the coordinates to where a mark exists or move the mark detecting frame.
E630100 “Vision System: The parameter value is illegal”
“图像处理装置错误:|参数值错误”
[Cause]
You tried to send an illegal data to VCS.
[Treatment]
Please examine the parameter.
E630101 “Vision System: parameter count is wrong”
“图像处理装置错误:|参数个数错误”
[Cause]
The format of the command interface between the VCS and your machine is not correct.
Some program versions are clashing with each other.
[Treatment]
Please re-install or version up the application.
Please re-boot your machine.
E630102 “Vision System: You tried to register an undefined component or mark”
“图像处理装置错误:|发现未定义的组件或标记”
[Cause]
The format of the command interface between the VCS and your machine is not correct.
Some program versions are clashing with each other.
[Treatment]
Please re-install or version up the application.
Please re-boot your machine.
E630103 “Vision System: Component ID number is invalid”
“图像处理装置错误:|参数个数错误”
[Cause]
An invalid component ID number is sent.
[Treatment]
Please examine the vision data in the production program.
Please re-load the production program.
E630104 “Vision System: Undefined command was issued”
“图像处理装置错误:|未定义命令”
[Cause]
The format of the command interface between the VCS and your machine is not correct.
Some program versions are clashing with each other.
[Treatment]
Please re-install or version up the application.
Please re-boot your machine.
E630105 “Vision System: Recognition conditions are not enough”
“图像处理装置错误:|识别条件设定不足”
[Cause]
The vision data in the production program is broken.
The format of the command interface between the VCS and your machine is not correct.
Some program versions are clashing with each other.
[Treatment]
Please examine the vision data in the production program.
Please re-load the production program.
Please re-install or version up the application.
Please re-boot your machine.
E630106 “Vision System: There is not enough storage of the user defined template”
“图像处理装置错误:|条件设定领域不足（模板匹配）”
[Cause]
VCS does not have enough memory(Restorable error)
VCS does not have enough flash memory(Non-restorable error)
An error occurred in the hardware of VCS(Non-restorable error)
[Treatment]
Please re-boot your machine.
Please change IMGCPUs.
E630107 “Vision System: You are ran out of the resources for the general vision component data”
“图像处理装置错误:|条件设定领域不足（普通图形组件）”
[Cause]
Some settings of the general vision data in the production program data are wrong.
A production program with old(new) format was read in.
VCS does not have enough memory(Restorable error)
Some program versions are clashing with each other.
[Treatment]
Please examine the vision data in the production program.
Please see the completion status of the production program.
Please re-load the production program.
Please re-start the application.
Please re-install or version up the application.
Please re-boot your machine.
E630108 “Vision System: The component is not supported as General Vision component”
“图像处理装置错误:|普通图形组件:不支持的组件”
[Cause]
The vision data in the production program data is broken.
Some settings of the general vision data in the production program data are wrong.
A production program with old(new) format was read in.
Some program versions are clashing with each other.
[Treatment]
Please examine the vision data in the production program.
Please see the completion status of the production program.
Please re-load the production program.
Please re-install or version up the application.
Please re-boot your machine.
E630109 “Vision System: It is unprescribed NAK code. NAK9 code”