JUKI贴片机错误代码集合.pdf - 第426页
Enable the bad mark reader for the unit status of the station profile during the MSL setup. E3804 No pick and place machine. " 没有选择和贴片机器 !" [Cause] Appears if no mounter is set for line specifi ed during the MS…
[Explanation]
Appears if the part type is changed to another part type for which the verification is unavailable, with
the verification enabled in the part data.
W3525 Other station assignments of this component will also be changed.
[Explanation]
Appears if other stations having the same part in the mounting data are also to be changed.
E3526 <%s>Can not be changed as it already exieted.
[Cause]
Appears if changing to an existing part name is tried with "Edit (E)-Part Name Change (H)" on the
menu-bar.
[Deal]
Change to a new part name.
E3801 Station which do not use Shape Edge exists.
"不能使用外形边缘的位置存在."
[Cause]
Appears if 770, 710, or 720 is set for the line, but the item, BOC camera or BOC sensor, is disabled
in the unit status of the station profile during the MSL setup.
[Deal]
Enable the item, BOC camera or BOC sensor, in the unit status of the station profile during the MSL
setup.
E3802 Station which do not use BOC Camera ,BOC Sensor or OCC exists.
"不能使用 BOC 照相机 ,BOC传感器或 OCC 的位置存在."
[Cause]
Appears if, for all line stations, the BOC camera or BOC sensor is not set to be used at 710/720/770,
OCC is not set to be used at 730, 730plus/740, 750/760, and 775, OCC-L is not set to be used at 2010,
or OCC-L or OCC-R is not set to be used at 2020, 2030, and 2040, when PWB mark used?or Ckt.
mark is used?is specified at the OCC type?item.
[Deal]
Enable BOC sensor, BOC camera, OCC, OCC-L, or OCC-R in the unit status of the station profile of
the MSL setup.
E3803 Station which do not use Bad Mark Reader.
"位置不使用坏的标记读入."
[Cause]
Appears if the bad mark reader is disabled for the unit status of the station profile during the MSL
setup.
[Deal]
Enable the bad mark reader for the unit status of the station profile during the MSL setup.
E3804 No pick and place machine.
"没有选择和贴片机器!"
[Cause]
Appears if no mounter is set for line specified during the MSL setup, despite the "Only Mounting" or
"Mounting-Application" is set for the "Application/Mounting" in the mounting data.
[Deal]
Set a mounter on the line during the MSL setup or change the item. "Application/Mounting" to
"Only Application" in the mounting data.
E3805 No Adhesive dispenser.
"没有贴装分配!"
[Cause]
Appears if no dispenser is set on the line specified during the MSL setup, despite "Only Application"
or "Mounting-Application" is set for the "Application/Mounting" in the mounting data.
[Deal]
Set a dispenser on the line during the MSL setup or change the item. "Application/Mounting" to
"Only Mounting" in the mounting data.
E3806 Head can't move to placement position.
"贴片头不能移动到放置位置."
[Cause]
The component placement position is not within the area where a had can move.
[Deal]
Change the placement position within the area where a head can move.
E3807 Station which do not use IC or LAIC head in the line.
"在线上不能使用 IC 或 LAIC 头的位置."
[Cause]
Appears if 720 or 740 is specified for the line, but the item, IC or LAIC head, is disabled for the unit
status in the station profile of the MSL setup, or if a vision part is used without 720 or 740.
[Deal]
Enable the item, IC or LAIC head, in the unit status of the station profile during the MSL setup.
E3808 IC head or LAIC head cannot be used on selected station.
"IC 头或 LAIC 头在选择位置不能使用."
[Cause]
Although a 720, 740 or 760 is specified for the line, "Not used" is specified for the IC head or LAIC
head in the "Unit conditions" field of the "Station profile" window which is invoked from the MSL
Setup program.
[Deal]
Set the IC head or LAIC head to "Used" in the "Unit conditions" field of the "Station profile"
window invoked from the MSL Setup program.
E3809 No station VCS or option VCS useful exists.
"在线上没有位置能使用随意的 VCS."
[Cause]
Appears if the item, standard VCS or option VCS, is disabled in the unit status of the station profile
during the MSL setup.
[Deal]
Enable the item, standard VCS or option VCS, in the unit status of the station profile during the
MSL setup.
E3810 option VCS cannot be used on selected station.
"指定的位置没有设置成使用可选择的 VCS."
[Cause]
Appears if the item option VCS is disabled in the unit status for the station profile during the MSL
setup, with 720, 740,760,2020,2040 specified for the station.
[Deal]
Enable the item option VCS in the unit status of the station profile for the specified station.
E3811 No station optioned with chip stand detect is in the line.
"在线上没有位置能有芯片站立探测."
[Cause]
Appears if 710 or 720 is set for the line but the item, chip-standup detector, is disabled in the unit
status of the station profile during the MSL setup.
[Deal]
Enable the item, chip-standup detector, in the unit status of the station profile during the MSL setup.
E3812 Chip stand detect option cannot be used on selected station.
"芯片站立探测项不能在选择位置使用."
[Cause]
Although a 710 or 720 is specified for the line, "Not used" is specified for the chip stand detect option
unit in the "Unit conditions" field of the "Station profile" window which is invoked from the MSL
Setup program.
[Deal]
Set the chip stand detect option to "Used" in the "Unit conditions" field of the "Station profile"
window which is invoked from the MSL Setup program.
E3813 Component data per a station exceeds maximum.
"每个位置的组件数据超出最大值."