JUKI贴片机错误代码集合.pdf - 第20页
E191001 “ A system error occurred. | Find resource ” “ 系统错误。 | 查找资源 “ [Cause] Failed to start an applicati on (teaching). ‧Some program versions are c lashing with each other. [Treatment] ‧Plea se re-start the applicatio…
[Cause]
Failed to start an application (teaching).
‧Some program versions are clashing with each other.
[Treatment]
‧Please re-start the application.
‧Please re-install or version-up the application.
If the error occurs even after the treatments above were performed, please contact our technical
service dept. for information.
E190004 “A system error occurred. | Timer acquisition”
“系统错误。|取得时间”
[Cause]
Failed to start an application (teaching).
‧Some program versions are clashing with each other.
[Treatment]
‧Please re-start the application.
‧Please re-install or version-up the application.
If the error occurs even after the treatments above were performed, please contact our technical
service dept. for information.
W190200 “Nozzle No. %d has not been allocated to ATC.|Allocate nozzle to ATC using ATC nozzle setup
function when machine setup.”
“%d 号吸嘴没有安装在 ATC。|请利用机器设置的 ATC 吸嘴设置，设置吸嘴。”
W190201 “Return to home has not yet been completed.”
“尚未完成返回原点。”
W190202 “Servo is in the free state.”
“伺服处于未使用状态。”
E191000 “A system error occurred. | Load library”
“ 系统错误。|加载程序 “
[Cause]
Failed to start an application (teaching).
‧Some program versions are clashing with each other.
[Treatment]
‧Please re-start the application.
‧Please re-install or version-up the application.
If the error occurs even after the treatments above were performed, please contact our technical
service dept. for information.
E191001 “A system error occurred. | Find resource”
“系统错误。|查找资源 “
[Cause]
Failed to start an application (teaching).
‧Some program versions are clashing with each other.
[Treatment]
‧Please re-start the application.
‧Please re-install or version-up the application.
If the error occurs even after the treatments above were performed, please contact our technical
service dept. for information.
E191002 “A system error occurred. | Load resource”
“ 系统错误。|加载资源 “
[Cause]
Failed to start an application (teaching).
‧Some program versions are clashing with each other.
[Treatment]
‧Please re-start the application.
‧Please re-install or version-up the application.
If the error occurs even after the treatments above were performed, please contact our technical
service dept. for information.
E191003 “A system error occurred”
“ 系统错误 “
[Cause]
Failed to start an application (teaching).
‧Some program versions are clashing with each other.
[Treatment]
‧Please re-start the application.
‧Please re-install or version-up the application.
If the error occurs even after the treatments above were performed, please contact our technical
service dept. for information.
E191004 “A system error occurred. | Timer acquisition”
“ 系统错误。|取得时间 “
[Cause]
Failed to start an application (teaching).
‧Some program versions are clashing with each other.
[Treatment]
‧Please re-start the application.
‧Please re-install or version-up the application.
If the error occurs even after the treatments above were performed, please contact our technical
service dept. for information.
E191100 “Camera type has not been selected. | Please chooses camera type and teaches again”
“ 没有选择摄像机。|请选择摄像机后，再示教。 “
[Cause]
A request was issued to teach marks with other devices than a camera.
[Treatment]
Please select a camera device, and try again.
E191101 “The contrast for the entire image is too low. | Please modifies the conditions and teaches again”
“ 图像全体的对比度偏低。|请更改条件后，再示教。 “
[Cause]
The specified user defined template does not have any notable patterns.
[Treatment]
Please re-teach other user defined templates to the machine.
E191102 “The template has no features. | Please modify the conditions and teach again”
“ 模板上无特征。|请更改条件后，再示教。 “
[Cause]
The specified user defined template does not have any notable patterns.
[Treatment]
Please re-teach other user defined templates to the machine.
E191103 “Failed to automatically learn the recognition conditions of template. | Details: %d | Please modify
the conditions and teach again”
“ 自动取得模板的识别条件失败。|详细:%d|请更改条件后，再示教。 “
[Cause]
Please refer to XXXXXX.
Some program versions are clashing with each other.
[Treatment]
‧Please re-install or version-up the application.
‧ Please re-start your machine.
E191104 “Input value exceeds predetermined data range.”
“ 输入值的大小超出输入范围。 “
Q191300 “There is a similar pattern in the upper part of the template. | Would you like to take the teaching
results in?”
“模板上方存在类似的图案。|是否获取示教结果？”