JUKI贴片机错误代码集合.pdf - 第30页
is broken. ‧ : The index number of the Component data. [Treatment] Please examine the production program. E241006 “ Measured component height has irregularities.(%s) ” “ 组件高度的测量结果错误。 (%s) ” E241007 “ Supply of the compon…
[Treatment]
Please increase some memory available by exiting unnecessary applications.
E241001 “Specified device cannot be used”
“不能使用指定设备”
[Cause]
You could not go into the teaching mode since the device selected by HOD is not installed or is set to
“not use”.
[Treatment]
Please check the installation setting (an option of MS parameter) or the use setting (Use unit of
Machine Setup) of the selected device, and reselect a device available.
E241002 “The station is different”
“站点不同”
[Cause]
You could not go into the teaching mode since the device selected by HOD and the Pick data specify
different stations to use.
[Treatment]
Please reselect a correct device.
E241003 “Specified position not move”
“不能移到指定坐标”
[Cause]
You could not go into the teaching mode since you could not move to the specified position with the
device selected by HOD.
[Treatment]
Please reselect a device that is available to move to the specified position.
E241004 “The input value is illegal (%s)”
“数据输入错误。(%s)”
[Cause]
This is a program error. The specified value in the dialog became an illegal value.
‧ : A dialog item that is a cause of the error.
[Treatment]
Please close the dialog and try again. If the error occurs again even after the retry, please contact our
technical service dept. for information.
E241005 “Index of component data has irregularities (%d)”
“组件索引错误。(%d)”
[Cause]
The index number of the Component data is illegal. There is a possibility that the production program
is broken.
‧ : The index number of the Component data.
[Treatment]
Please examine the production program.
E241006 “Measured component height has irregularities.(%s)”
“组件高度的测量结果错误。(%s)”
E241007 “Supply of the component is no TAPE.”
“不属于带状元件。”
E241008 “Supply of the component is not assign”
“没有设置组件姿势。”
[Cause]
'Component package' has not been set in the Component data.
[Treatment]
Please set 'Component package' in the Component data.
E241009 “Centering of the component is no laser”
“不属于激光定中心组件。”
[Cause]
'Centering method' has not been set to Laser centering in the Component data.
[Treatment]
Please set 'Centering method' to Laser centering in the Component data.
E241010 “Centering of the component is not assign”
“没有设置定中心方式。”
[Cause]
'Centering method' has not been set in the Component data.
[Treatment]
Please specify 'Centering method' in the Component data.
E241011 “No pick data”
“吸取数据不存在。”
[Cause]
There is no Pick data that is linked to the Component data.
[Treatment]
Please examine the production program.
E241012 “There is no pick head.”
“吸取头不存在。”
E241013 “Component data is incomplete”
“组件数据不完整。”
[Cause]
The Component data is incomplete.
[Treatment]
Please complete the Component data.
E241014 “Index of pick data has irregularities. (%d)”
“吸取数据的索引错误。(%d)”
[Cause]
The index number of the Pick data is illegal. There is a possibility that the production program is
broken.
‧ : The index number of the Pick data.
[Treatment]
Please examine the production program.
E241015 “Pick data is incomplete”
“吸取数据不完整。”
[Cause]
The Pick data is incomplete.
[Treatment]
Please complete the Pick data.
E241016 “Setting the nozzle has not been allocated to ATC. | Allocate the nozzle to ATC using TC nozzle
setup function when machine setup. | Nozzle no. : %d”
“指定吸嘴没有安装在 ATC。|请用机器设置的 ATC 吸嘴设置功能设置相关吸嘴。|吸嘴
号 : %d”
[Cause]
The nozzle that is set in the Component data cannot be assigned to ATC.
|Nozzle No.
[Treatment]
Please check the nozzle No. in the Component data . If the nozzle No. is correct, please assign the
nozzle to ATC in the ATC Nozzle Allocation in the Machine Setup.
E241017 “Specified outlin of the component has irregularities.(%s)”
“组件尺寸错误。(%s)”
E241018 “There is no pick data available”
“实用吸取数据不存在。”
[Cause]
There is no data available in the Pick data linked to.