JUKI贴片机错误代码集合.pdf - 第60页
E292002 “ Registration number was exceeded ” “ 注册数已满，不能再注册。 ” [Cause] As the maximum number of regist ration is 100, you can not regi s ter any new data in the Mark Database. [Treatment] Please delete unnecessary marks o…
Q291507 “The origin point return of automatic conveyor width adjustment is non-completion. Continue
anyway? | Please push 'No' when discontinue. 'Yes' when continuing”
“没有结束调整基版宽度的返回原点。是否执行返回原点？|执行前，请取下基板和摇把。
|执行，请按[是]﹔停止，请按[否]。”
[Cause]
You are asked if to perform the Home returning of the Auto. PWB Width Alignment Control since its
Home returning has not been complete yet.
[Treatment]
If you want to continue the operation, press 'yes'. If not, press 'No'.
Q291508 “MTC Conveyor width is moved,too? | Please push 'No' when discontinue 'Yes' when continuing.”
“是否也移动 MTC 装置的基板幅宽？|执行，请按[是]﹔停止，请按[否]。”
I291509 “Please set online for MTC.”
“请联接 MTC。”
Q291510 “Conveyor width is moved. Does it move, although the vacuum table is attached? | Please push 'No'
when discontinue 'Yes' when continuing.”
“ 虽然真空器已被安装，是否也移动基板幅宽？|执行，请按[是]﹔停止，请按[否]。 “
E292000 “No registered data”
“没有注册数据。”
[Cause]
The following procedures were taken place when the number of the registered issue of Mark Database
is zero.
1. Press [Rename(C)] button or [Delete(D)] button on the Mark Database Management screen.
2. Press [Replace(A)] button on the Registration Mark Database screen.
3. Press [Copy(C)] button on the Vision Copy screen.
[Treatment]
The procedures above can not be performed when there is no registry in the Mark Database.
E292001 “Please select the mark”
“请选择标记。”
[Cause]
1. Although [Rename (C)] button or [Delete(D)] button screen were pressed on the Mark Database
Management screen, there is no selected mark to be an object of the action.
2. Although [Copy(C)] button was pressed on the Vision Copy screen, there is no selected mark to
be an object of the action.
[Treatment]
Please select a mark to be an object of each action.
E292002 “Registration number was exceeded”
“注册数已满，不能再注册。”
[Cause]
As the maximum number of registration is 100, you can not register any new data in the Mark
Database.
[Treatment]
Please delete unnecessary marks on the Mark Database Management screen.
E292003 “The mark of the same registration name exists”
“已经存在同样注册名的标记。”
[Cause]
1. On the Mark Data name change screen which is shown when pressing [Rename(C)] button on the
Mark Database Management screen, a name which was entered as “a name after the change” has
already been registered in the Mark Database.
2. When pressing [Add New(N)] button or [Replace(A)] button on the Registration Mark Database
screen, a name which was entered as “a name to register” has already been registered in the Mark
Database.
[Treatment]
Please enter the names that have not been registered in the Mark Database yet.
E292004 “Please input the registration name”
“请输入注册名。”
[Cause]
1. Although [OK] button was pressed on the Mark Data name change screen that is shown when
pressing [Rename(C )] button on the Mark Database Management screen “a name after the change”
has not been entered yet.
1. 数据库管理画面上，单击[重新命名(C)]键显示标记数据名更改画面。在此画面上单
击[确定]键，但没有输入“更改后的文件名”。
2. Although [Add new(N)] button or [Replace(A)] button was pressed on the Mark Database
register screen “a name to register” has not been entered yet.
2. 标记数据库注册画面上，单击[新建(N)]或[覆盖注册(A)]键时，没有输入“注册文件
名”。
[Treatment]
Please enter a mark name.
请输入标记名。
E292005 “Please select the registered area”
“请选择注册区域。”
[Cause]
Although [Replace(A)] button was pressed on the Mark Database Registration screen, there is no
selected mark to be an object of the action.
标记数据库注册画面上，单击[覆盖注册(A)]键时，没有选择要覆盖的标记。
[Treatment]
Please select a mark to be an object of overwriting.
请选择要覆盖的标记。
E292006 “The mark recognition type of the selected mark is different from setting the PWB data.”
“被选标记的识别类型与基板数据上的设置不相同。”
[原因]
标记识别种类为多值识别时，要复制二值化标记数据情况。
[解决]
请选择适当的标记数据。
E292007 “The mark type is different from setting data.”
“标记类型跟设置的类型不相同。 “
[原因]
粘贴复制数据领域的标记数据类型不同。
[解决]
请先删除标记数据，然后再复制标记数据。
Q292500 “The mark data of a different L-R station is copied. Is it good though the recognition accuracy
decreases?”
“复制左右不同站点的标记数据，可是识别精度过低，是否继续？”
Q292501 “The selected mark data is deleted. Is it good?”
“是否删除被选定的标记数据？”
[Cause]
This message appears in order to confirm you if to delete the data when pressing[Delete(D)] button on
the Mark Database Management screen.
[Treatment]
If you want to delete the mark, press [OK] button. If not, press [Cancel] button.
Q292502 “The mark of the same registration name exists. Do you overwrite?”
“已经存在同样注册名的标记，是否覆盖保存？”
第三章 机器设置