JUKI贴片机错误代码集合.pdf - 第410页
W2903 “ Optimization processing is being abort ed. “ " 优化过程失败。 " E2907 Pick data is not complete. [Cause] The function Opt3Simu lParralelC reate returned error number 700. [Deal] Consult the manufacturer. E2911…
W2513 “It cannot be placed in front of a dispenser. “
"在分配前不能设置。"
W2514 “It cannot be replaced with a dispenser. “
"不能用分配者代替。"
W2515 “It cannot be replaced with mounter. “
"不能用贴片代替。"
W2516 “Station cannot be changed because it is already installed in the line. “
"位置不能被改变因为已经安装在线上"
W2517 “MTC will cause a conflict with permanent feeders. clear the area fron R-55 to R-63, then let MTC
use area. “
"MTC 将导致和永久进料器的冲突，清除从 R55 到 R63 区域，让 MTC 使用区域。"
W2508 "Type of device is changed. Is this OK?"
"传送选项(长，宽)设置已被修改，初始化基板尺寸和基准坐标。"
W2520 “Data of different style packaging cannot be copied. “
"不同类型包装的数据不能复制。 "
E2900 emory is not enough in optimization.
"未受保护的优化区域处理正在进行。"
[Cause]
Indicates insufficient free memory space.
[Deal]
Exit from other applications and retry the process.
E2901 Not found optimization message.
"挑选数据不完全。"
[Cause]
A failure was found in the data.
[Deal]
Complete the pick data.
E2902 System error.
"出现系统错误。"
[Cause]
Initializing DLL was failed.
[Deal]
Loading the files required by HLC was failed. Reinstall the system.
W2903 “Optimization processing is being aborted. “
"优化过程失败。"
E2907 Pick data is not complete.
[Cause]
The function Opt3SimulParralelCreate returned error number 700.
[Deal]
Consult the manufacturer.
E2911 Data is incorrect ,so stop allocation pick data of MTC.
"不正常数据探测; MTC 位置分配失败。"
[Cause]
A failure was found in the MTC data.
[Deal]
Correct the part data and pick data (MTC), and retry the process.
E2912 Data is incorrect so stop calculation for placement number.
"不正常数据已经导致计算贴片数量失败。"
[Cause]
A failure was found in the program data.
[Deal]
Rebuild the program data.
E2913 Data is incorrect ,so stop calculation for placement peak point.
"不正常数据已经导致贴片最高点计算失败。"
[Cause]
A failure was found in the program data.
[Deal]
Correct the mounting data, and retry the process.
E2914 Data is incorrect, so stop allocation for number of picking.
"不正常数据已经导致依照选取顺序分配失败。"
[Cause]
A failure was found in the program data.
[Deal]
Correct the pick data, and retry the process.
E2915 Sorting for placement layer and nozzle number is abnormal end.
"贴片层同一吸嘴号处理不正常。"
[Cause]
A failure was found in the program data.
[Deal]
Check the data (layer and nozzle information).
E2916 Data is incorrect ,so making for pairing placement data.
"不正常数据导致关系预备处理失败。"
[Cause]
A failure was found in the program data.
[Deal]
Correct the data.
E2917 Memory is not enough at optimization feeder priority.
"在保护优先区域的进料器顺序处理过程中出现错误。"
[Cause]
Indicates insufficient free memory space.
[Deal]
Exit from other applications, and retry the process.
E2918 Data is incorrect , so stop processing for circuit repeat.
"不正常数据已经导致电路重复决定失败。"
[Cause]
A failure was found in the program data.
[Deal]
Correct the data.
E2931 Process for make feeder pair of parallel pick is abnormal end.
"同时选取进料器排版预先处理不正常终止"
[Cause]
The data is unavailable for optimization.
[Deal]
Consult the manufacturer.
E2932 Allocation for feeder pair of parallel pick is abnormal end.
"同时选取进料器排版处理不正常终止。"
[Cause]
The data is unavailable for optimization.
[Deal]
Consult the manufacturer.
E2933 Sorting for parallel pick feeder allocate is abnormal end.
"处理资料排架的同时选取进料器排版不正常终止。"
[Cause]