JUKI贴片机错误代码集合.pdf - 第448页
吗？ " W5507 “ Backup file has not been created “ " 不能创建备份文件。 " W5508 “ This version cannot accept the database file which contains adh esive data. “ " 该版本不能接受包含粘性数据的数 据库文件。 " E6000 “ Optimization …
E5014 “The component name <%s> is already being used. “
"组件名<%s>已经被使用。"
E5015 “The specified file name is incorrect. “
"特殊文件名不正确。"
E5016 “The number of the first missing component is incorrect. “
"最初缺省组件数量不正确。"
E5017 “Timer start-up failed. “
"激活定时器失败。"
E5030 “The same adhesive patten name already exits %s. “
"同样的粘性图案名已经存在%s."
E5050 “This version of HLC cannot accept the database file that includes ahesive pattern data. “
"该版本的 HLC 不能接受包括粘性图案数据的数据库文件。"
E5051 “No registerable data exists. “
"注册数据不存在。"
E5070 “No registerable data exists in this file. “
"在该文件中没有注册数据。"
E5071 “You cannot resister this programbecause it is still in production. “
"因为始终在产生中，不能注册该程序。"
W5501 “The database file does not exist.Shall one be created? “
"数据库文件不存在，要创建吗？"
W5502
“Selected data will be deleted.Is this OK? “
"选择数据将被删除，确定吗？"
W5503 “<%s> has been updated.Shall it be saved? “
"<%s> 已经被更新，要保存吗？"
W5504 “File will be deleted.Is this OK? “
"文件将被删除，确定吗？"
W5505 “The specified file already exists.Shall it be overwritten? “
"指定文件已经存在，要覆盖吗？"
W5506 “The database structure has been changed.Unless this file is updated. It cannot be handled in this
version.The updating operation will take some time. Shall it be executed? “
"数据库结构已经改变到文件更新， 在该版本中不能处理，更新操作以后在进行，要执行
吗？"
W5507 “Backup file has not been created “
"不能创建备份文件。"
W5508 “This version cannot accept the database file which contains adhesive data. “
"该版本不能接受包含粘性数据的数据库文件。"
E6000 “Optimization is interrupted. “
"优化被中断。"
E6001 File output failed.
"文件输出失败。"
[Cause]
Loading the files, G3H, G3N, and OSL, was failed. Locking and unlocking a file was failed. Moving
the temporary directory was failed. Free space in the memory may be insufficient.
[Deal]
Run the "Scan-disk" to check the disk.
Delete unnecessary files and retry the process.
E6002 Memory assignment failed.
"分配内存数量失败。"
[Deal]
Allocating memory to the table was failed. EPU optimizing loading was failed.
[Cause]
Exit from other applications and retry the process.
E6003 “Memory lock failed. “
"锁定内存失败。"
E6004 “Memory release failed. “
"自动释放内存失败。"
E6005 Dialog box creation failed.
"创建对话框失败。"
[Cause]
Generating dialogs pertinent to optimization was failed. Insufficient free space in memory or a
failure on the disk is suspected.
[Deal]
Run the "Scan-disk" to check the disk. Exit from other applications, and retry the process.
E6006 “Dialog box display failed. “
"显示对话框失败。"
E6007 System error has occurred.
"出现系统错误。"
[Cause]
After creating a table for mounting, creating a feeder layout window with no mounting data was
failed.
[Deal]
Consult the manufacturer.
E6008 Failed to combine the program.
[Cause]
Merging the divided programs was failed.
[Deal]
Retry the process.
E6009 Tact simulation failed.
[Cause]
An error was detected at the line entry. Insufficient free space in the memory or a failure on the disk
is suspected.
[Deal]
Run the "Scan-disk" to check the disk. Exit from other applications, and retry the process.
E6100 Number supplied is out of range.
"供给的数量超出范围。"
[Cause]
An excessive value was specified for the number of supplies.
[Deal]
Enter a value within the range.
E6101 “Error occurred in finding number supplied, upper limit of number supplied or lower limit of
number supplied. “
"在查找提供数量时出现错误，增加提供的数量限制或降低提供的数量限制。"
E6102 “HLC.INI file read-in failed. “
"读入 HLC.INI 文件失败。"
E6103 “Data is input so as to eliminate all machine stations from partition destinations. “
" 数据被输入为了从注定分开区域终止所有机器位置。"
E6104 “Number of distributed stations is outside limits. “
"分配位置数量超过外部限制。"