JUKI贴片机错误代码集合.pdf - 第436页
[Deal] Check for the available station model. E3859 The desi gnated station does not support directed package. [Cause] The tray (holder, MTC or MTS) i s unavailable f or a 710 station . [Deal] Check the station model to …
[Cause]
Indicates that the line does not have one of 720, 740,760 and 2040 stations.
[Deal]
Add one of 720, 740,760 and 2040 stations on the line during the MSL setup.
E3853 Resource of bulk feeder is set to 0.
[Cause]
Indicates that the number of the specified bulk feeder types is set to 0 in the resource table during the
MSL setup.
[Deal]
Specify an appropriate value for the bulk feeder types in the resource table during the MSL setup.
E3854 Pick and place station assignment is different.
[Cause]
Indicates that different stations were specified between the mounting data and the absorption data.
[Deal]
Specify the same station or use the automatic selection.
E3855 The designated station does not support lane 8.
[Cause]
Lane 8 of the stick feeder is unavailable for a 710 or 720 station.
[Deal]
Specify another lane or specify a station capable of using the lane (730,740,750 or 760).
E3856 The designated station does not support No.5 nozzle.
[Cause]
Indicates that a 710 station cannot use nozzle 5.
[Deal]
Specify another nozzle or a station capable of using the lane (720).
E3857 The designated station does not support 44mm and 56mm width tape feeder.
[Cause]
Indicates that 44 or 56 mm is unavailable for a 710 station.
[Deal]
Specify another nozzle type, or use other station types (720, 730, 740,750,760) available for the
specified nozzle type.
E3858 The designated station does not support directed centering method.
[Cause]
The mechanical centering is only available for a 710 or 720 station, the vision centering, a 720,
740,760,2020 or 2040 station, and the laser centering, a 730, 740, 750,760 and 2000 series station.
[Deal]
Check for the available station model.
E3859 The designated station does not support directed package.
[Cause]
The tray (holder, MTC or MTS) is unavailable for a 710 station.
[Deal]
Check the station model to use.
E3860 The designated station does not support directed component type.
(Station) 710 720 730 740 750 760
(Type of
components)
Mecha Mecha Vision Laser Laser Vision Laser Laser Vision
Square chip OK OK OK OK OK OK
MELF OK OK OK OK OK OK
Aluminum
electrolytic capacitor
OK OK OK OK OK OK OK OK
GaAsFET OK OK OK OK OK OK
SOT OK OK OK OK OK OK OK OK
SOP OK OK OK OK OK OK OK OK OK
HSOP OK OK OK OK OK OK OK OK OK
SOJ OK OK OK OK OK OK OK OK
QFP OK OK OK OK OK OK OK OK
QFJ(PLCC) OK OK OK OK OK OK OK OK
BQFP(PQFP) OK OK OK OK OK OK OK OK
TSOP OK OK OK OK OK OK OK OK
TSOP2 OK OK OK OK OK OK OK
BGA OK OK OK OK OK OK OK OK
FBGA OK
Net work resistant OK OK OK OK OK OK OK
Trimmer OK OK OK OK OK OK OK
One way lead
connector
OK OK OK OK OK OK OK OK
Two way lead
connector
OK OK OK OK OK OK OK OK
Z lead connector OK OK OK OK OK OK OK OK
CON OK
J league socket OK OK OK OK OK OK OK OK OK
Gull wing socket OK OK OK OK OK OK OK OK OK
Socket with bumper OK OK OK OK OK OK OK OK
outline recog. OK
General vision
component
Other components OK OK OK OK OK OK