JUKI贴片机错误代码集合.pdf - 第445页
W4509 “ %s: Production is in prog ress.If it is ended, it might not be p ossible to resume it.Is this really OK? “ "%s: 生产正在进行中 . 如果结束，则 不能恢复，确定要结束吗？ " E4601 “ Contents of HLCPROD.INI are incorrect, so sett ing…
"<位置 ID = %d收到错误占有 接收状态 = %s> 出现接受错误，要继续传送吗？"
E4034 “Shortage in memory occurred when receiving data. <Station ID = %d Receive status = %s>
Do you continue this transmission ? “
"接受数据是内存出现不足<位置 ID = %d 接收状态 = %s> 继续传送吗？"
E4040 “There is a inconsistent with optimized time and last edited time. Filename is %s. “
"优化时间和最后编辑时间不一致，文件名. "
E4100 “Component supply number write failed. “
"写入组件供给数量失败."
E4101 “Timer can't be set for displaying finish time. “
"定时器不能为显示完成时间而设置."
W4200 “in production. You cannot terminate. “
"生产中，不能终止."
W4300 “Program data will be uploaded. Are you sure? “
"程序数据将被上载，确定吗？"
E4501 “Production has already been started. “
"生产已经开始."
W4502 “Number of reserved program files exceeds upper limit. “
"保留程序文件数量超过上限"
W4503 “There are already data in station ID = %d.Is it OK to overwrite them? “
"在位置 ID=
％d 处已存在数据.覆盖吗?"
E4504 “Coupling processing has been ended. “
"联接处理已经结束."
E4505 “Error log information station ID = %d:There are no valid data. “
"错误日志信息位置 ID=%d，没有有效数据.没有有效数据."
E4506 “Production conditions information station ID = %d:There are no valid data. “
"生产状况信息位置 ID=%d,没有有效数据."
E4507 “Management information station ID = %d:There are no valid data. “
"管理信息位置 ID=%d.管理信息位置 ID=%d,没有有效数据."
E4508 “Number of components information station ID = %d:There are no valid data. “
"组件信息数量位置 ID=％d.没有有效数据. "
W4509 “%s: Production is in progress.If it is ended, it might not be possible to resume it.Is this really OK?
“
"%s:生产正在进行中.如果结束，则不能恢复，确定要结束吗？"
E4601 “Contents of HLCPROD.INI are incorrect, so settings will be considered invalid. “
" HLCPROD.INI 内容不正确 ，设置无效."
E4602 “Propagation processing for station ID = %s has been skipped. “
"处理位置 ID = %s 的传送被跃过。"
E4603 “ID=%s station is not correct in type.Re-specify station in MSL set-up. “
"ID=%s 位置类型不正确，在 MSL 设置中重新指定位置。"
E4604 “ID=%s station has wrong unit situation.Some components will not be placed when executing
production.Are you sure of starting production ? “
"ID=%s 处有错误的单元位置，当执行生产时一些组件不能被放置，确定要开始生产吗 ?"
E4605 “File different from reserved one exists in ID=%s.Operation will be inconsistent at the next start of
production. Are you sure of clearing reserved file and stopping production ? “
"文件和在 ID=%s 处保留的文件不同，操作将和下一个要开始的生产不一致。
确定要清除保留文件并且终止生产吗？"
E4606 “Production reservation program is to be cleared and production is to be finished. If program is
cleared, operation will be inconsistent at the next start of production. Are you sure of clearing
program ? “
"生产保留程序被清楚，生产终止, 如果程序被清除，操作将和下一个开始的上产不一致，
确定要清除程序 ?"
E4607
“Station type mismatches between downloading program and destination station. Please re-excute
optimization. “
"下载程序和到达站之间的位置类型不匹配，请重新执行优化。"
E4608 “ATC nozzle setup differs between HLC and station with ID %s. If you start production, some
component will not be placed. Are you sure to start production ? “
"ATC 吸嘴设置在 HLC 和位置 ID %s 不同，如果开始生产，一些组件将不能被贴片，确定
要开始生产吗?"
E4609 “The needle number differs in station ID %s. If you start production, adhesion will not excute
correctly. Are you sure to start production ? “
"针数量和位置 ID %s不同，如果开始生产，粘贴将不能正确执行，确定要开始生产吗 ?"
E4610 “The nozzle No. or the needle No. differs in station ID %s. If you start production, placement will
not excute correctly. Are you sure to start production ? “
"吸嘴号和吸嘴号在位置不同 %s.。 < 如果开始生产, 防止将不能正确执行，确定要
开始生产吗？"
W4700 “Product reservation file will be canceled Are you sure? “
"保护预定文件将被删除，确定吗？"
E5001 “Invalid directory is specified.Database has been completed. “
"无效目录被指定，数据库已经完成。"
E5002 “An error occurred in file I/O. “
"文件输入输出出现错误。"
E5003 “The specified other processing is being used. “
"指定的其它程序正在被使用。"
E5004 “Cannot be saved because there is no unused capacity on disc. “
"在磁盘已没有可使用空间，不能保存。"
E5005 “Database has already been started up. “
"已经激活数据库。"
E5006 “Data being searched for cannot be found. “
"找不到要寻找的数据。"
E5007 “Please input type. “
"请输入类型。"
E5008 “Number of leads is incorrect. “
"引脚数量不正确。"
E5009 “Number of missing leads is incorrect. “
"
缺省引导数量不正确。"
E5010 “Data to be registered are incorrect, so data cannot be read in. “
"数据注册不正确，数据不能被读入。"
E5011 “The specified file is open. It cannot be deleted. “
"指定文件已打开，不能被删除。"
E5012 “Database has been completed. “
"数据库已经完成。"
E5013 “The maximum number that can be registered has been exceeded. More cannot be registered. “
"已经超过最大数量的注册值，不能再注册。"