JUKI贴片机错误代码集合.pdf - 第443页
E4019 “ Timer for flashing li ght cannot be set. “ " 为闪光灯设置的定时器不能设置 ." E4020 “ Communication processing start -up failed. “ " 通讯过程激活失败 ." E4021 “ Communication processing has not been st arted up. “ &…
E4004 “Allocation for source table use failed. “
"为资源表使用分配失败."
E4005 “Allocation for use of previously mounted components failed. “
"为预定贴装使用分配失败."
E4006 “Line configuration file is incorrect.Please repeat setup. “
"线结构文件不正确，请重新设置."
E4007 “INI file information is incorrect.Please repeat setup. “
"文件信息不正确，请重新设置."
E4008 “Reserved program does not exist. “
"保留程序不存在."
E4009 “Reserved program file cannot be created. “
"不能创建保留程序文件."
E4010 “Opening of reserved program file failed. “
"打开保留程序失败."
E4011 “Read-in of reserved program file failed. “
"读入保留程序失败."
E4012 “Write-in of reserved program file failed. “
"写入保留程序失败."
E4013 “Reserved program for production not yet performed does not exist. “
"不能执行的为生产的保留程序不存在."
E4014 “Full management information line cannot be set. “
"
整体管理信息线不能被设置."
E4015 “Acquisition of information for full management information line failed. “
"为整体管理信息获得信息失败."
E4016 “Management information station ID = %dinformation acquisition failed. “
"管理信息位置 ID=%D 获得信息失败."
E4017 “Number of components information station ID = %dinformation acquisition failed. “
"获得组件信息位置 ID=％d 信息数量失败."
E4018 “Number of components information area allocation failed. “
"组件信息区域数量分配失败."
E4019 “Timer for flashing light cannot be set. “
"为闪光灯设置的定时器不能设置."
E4020 “Communication processing start-up failed. “
"通讯过程激活失败."
E4021 “Communication processing has not been started up. “
"通讯过程未被激活."
E4022 “Communication processing initialization file read-in failed. “
" 通讯过程读入初始化文件失败."
E4023 “Optimization processing has been aborted. “
"优化过程已经失败."
E4024 “An error occurred in optimization processing. “
"在优化过程中出现一个错误."
E4025 “Coupling processing has been aborted. “
"连接过程已经失败."
E4026 “An error occurred in coupling processing. “
"连接过程出现一个错误."
E4027 “Production conditions information station ID = %dinformation acquisition failed. “
"生产条件信息位置 ID = %d 信息获得失败."
E4028 “Error log information station ID = %dinformation acquisition failed. “
"错误文件信息位置 ID=%d,获得信息失败."
E4029 “
Coupling processing start-up failed. “
" 激活耦合过程失败."
E4030 “Arc net driver could not be started up. “
"不能激活弧状网络驱动程序."
E4031 “Production will be ended. “
" 生产将被终止."
E4032 “Transmission failed. <Station ID = %d Send status = %s> Do you want to continue this
transmission? “
"传送失败.<位置 ID = %d 发送状态 = %s>传送终止，要继续传送吗 "
E4033 “Receive error occurred. <Station ID = %d Receive status = %s> Do you continue this
transmission ? “
"<位置 ID = %d收到错误占有 接收状态 = %s> 出现接受错误，要继续传送吗？"
E4034 “Shortage in memory occurred when receiving data. <Station ID = %d Receive status = %s>
Do you continue this transmission ? “
"接受数据是内存出现不足<位置 ID = %d 接收状态 = %s> 继续传送吗？"
E4040 “There is a inconsistent with optimized time and last edited time. Filename is %s. “
"优化时间和最后编辑时间不一致，文件名. "
E4100 “Component supply number write failed. “
"写入组件供给数量失败."
E4101 “Timer can't be set for displaying finish time. “
"定时器不能为显示完成时间而设置."
W4200 “in production. You cannot terminate. “
"生产中，不能终止."
W4300 “Program data will be uploaded. Are you sure? “
"程序数据将被上载，确定吗？"
E4501 “Production has already been started. “
"生产已经开始."
W4502 “Number of reserved program files exceeds upper limit. “
"保留程序文件数量超过上限"
W4503 “There are already data in station ID = %d.Is it OK to overwrite them? “
"在位置 ID=
％d 处已存在数据.覆盖吗?"
E4504 “Coupling processing has been ended. “
"联接处理已经结束."
E4505 “Error log information station ID = %d:There are no valid data. “
"错误日志信息位置 ID=%d，没有有效数据.没有有效数据."
E4506 “Production conditions information station ID = %d:There are no valid data. “
"生产状况信息位置 ID=%d,没有有效数据."
E4507 “Management information station ID = %d:There are no valid data. “
"管理信息位置 ID=%d.管理信息位置 ID=%d,没有有效数据."
E4508 “Number of components information station ID = %d:There are no valid data. “
"组件信息数量位置 ID=％d.没有有效数据. "