JUKI贴片机错误代码集合.pdf - 第136页
“ IC 回收器被装满。 | 请卸下组件。 ” [Cause] Although the IC collection belt i s selected in the 'Component r eject to' in the Component data, the component cannot be returned since the IC collection belt is fu ll. [Treatme…
“异种组件 “
E510303 “LA Retry Over”
“LA 重试结束 “
E510304 “Retry Over”
“重试结束”
E510305 “Offline”
“脱机”
E510306 “Supply”
“补充”
E510307 “Moving Error”
“运行异常 “
E510308 “Laser recog Error”
“激光识别错误 “
E510309 “Tombstone”
“芯片站立 “
E510310 “Pick Error”
“传接失误 “
E510311 “No Feeder Bank”
“送料器台架无效 “
E510312 “No Stacker”
“托盘存储箱无效 “
E510313 “No Tray”
“托盘无效 “
E510314 “Feeder pitch gap”
“ 送料间距出错”
E510315 “Component direction”
“组件方向异常 “
E510316 “Laser recog angle error”
“激光识别角度错误 “
W510401 “The IC collection belt is brimmer”
“IC 回收器被装满。|请卸下组件。”
[Cause]
Although the IC collection belt is selected in the 'Component reject to' in the Component data, the
component cannot be returned since the IC collection belt is full.
[Treatment]
Please hit the OK button.
Also, if you want to use the IC collection belt, please remove the component.
W510402 “There is no semiauto-trash box.|Please set.”
“半自动废弃盒不存在。|请安装半自动废弃盒。”
I510801 “It is temporary stop by the part protection. | Please detach parts”
“为保护组件实施暂停。|请取下组件。”
[Cause]
'Protect' is selected in the 'Component reject to' in the Component data.
[Treatment]
Please remove the component manually and hit the OK button.
E511001 “It is packet making error”
“建立信息包发生错误。”
[Cause]
Failed to create a Production movement packet.
[Treatment]
Please contact our technical service dept. for information.
E511002 “The command error occurred”
“命令错误。”
[Cause]
An UN-recognizable command was issued.
[Treatment]
A wrong version has been installed.
Please install the latest software.
E511003 “Failed in create of the command of a sub-scheduler”
“创建次调度程序命令失败。”
[Cause]
The software did not get started properly.
[Treatment]
Please turn off the power supply of the machine and reboot it.
E511004 “Failed in the opening of the command of the application-manager”
“打开程序管理命令失败。”
[Cause]
The software did not get started properly.
[Treatment]
Please turn off the power supply of the machine and reboot it.
E511005 “Failed in the transmission of the response to the application-manager”
“往程序管理发送应答失败。”
[Cause]
The software did not get started properly.
[Treatment]
Please turn off the power supply of the machine and reboot it.
E511006 “Failed in the reception of the command from the application-manager”
“接收程序管理的命令失败。
[Cause]
The software did not get started properly.
[Treatment]
Please turn off the power supply of the machine and reboot it.
E511007 “Failed in the opening of the command of the scheduler”
“打开调度程序命令失败。”
[Cause]
The software did not get started properly.
[Treatment]
Please turn off the power supply of the machine and reboot it.
E511008 “Failed in the transmission of the response to the scheduler”
“往调度程序发送应答失败。”
[Cause]
The software did not get started properly.
[Treatment]
Please turn off the power supply of the machine and reboot it.
E511009 “Failed in the reception of the command from the scheduler”
“接收调度程序的命令失败。”
[Cause]
The software did not get started properly.
[Treatment]
Please turn off the power supply of the machine and reboot it.