JUKI贴片机错误代码集合.pdf - 第439页
Rearrange the combination re ferring t o the above table. E3861 The desi gnated station does not support directed component size and height. [Cause] Appears if any invalid value is specified for a particular mode l; th e…
(Station) 2010 2020 2030 2040
(Type of
components)
Mecha Vision Laser Laser Vision
Square chip OK OK OK OK
MELF OK OK OK OK
Aluminum
electrolytic capacitor
OK OK OK OK OK OK
GaAsFET OK OK OK OK OK OK
SOT OK OK OK OK OK
SOP OK OK OK OK OK OK
HSOP OK OK OK OK OK OK
SOJ OK OK OK OK OK OK
QFP OK OK OK OK OK OK
QFJ(PLCC) OK OK OK OK OK OK
BQFP(PQFP) OK OK OK OK OK OK
TSOP OK OK OK OK OK OK
TSOP2 OK OK OK OK OK OK
BGA OK OK OK OK OK OK
FBGA OK OK
Net work resistant OK OK OK OK
Trimmer OK OK OK OK
One way lead
connector
OK OK OK OK OK OK
Two way lead
connector
OK OK OK OK OK OK
Z lead connector OK OK OK OK OK
CON OK OK
J league socket OK OK OK OK OK OK
Gull wing socket OK OK OK OK OK OK
Socket with bumper OK OK OK OK OK OK
Outline recog. OK OK
General vision
component
OK OK
Other components OK OK OK OK
[Deal]
Rearrange the combination referring to the above table.
E3861 The designated station does not support directed component size and height.
[Cause]
Appears if any invalid value is specified for a particular model; the following table lists the part
outside dimension and height available for each station:
(Specified station) (Part outside dimension)
(Height)
710 0.5mm-20.0mm 0.0mm- 6.0mm
720 Mechanical 0.5mm-33.5mm 0.0mm-10.0mmVision
Standard VCS 7.0mm-50.0mm 0.0mm-10.0mmVCS03
7.0mm-33.5mm 0.0mm-10.0mm730 Laser 0.5mm-23.5mm
*0.0mm- 6.0mm(PLUS) Laser LAHD 0.5mm-23.5mm
*0.0mm- 6.0mm
LA 0.5mm-33.5mm
*0.0mm- 6.0mm740 Vision Standard VCS 3.0mm-50.0mm
*0.0mm-10.0mmVCS03 3.0mm-33.5mm
*0.0mm-10.0mm
Laser 0.5mm-33.5mm
*0.0mm-10.0mm750 Laser 0.5mm-23.5mm
*0.0mm- 6.0mm
760 Vision Standard VCS 3.0mm-50.0mm
*0.0mm-10.0mm
VCS03 (Optional VCS 37.5mm) 3.0mm-33.5mm
*0.0mm-10.0mm
Optional VCS 27.5mm 4.0mm-24.0mm
*0.0mm-10.0mm
Laser 0.5mm-33.5mm
*0.0mm-10.5mm
*: For a station equipped with the function for processing 20mm component, 0.0mm to 20.00mm2010 Laser
0.3mm-26.0mm 0.0 mm ?6.0 mm (up to 20.0 mm for machines compatible with 20 mm)
2020 Laser 0.3mm-50.0mm 0.0 mm ?12 mm (up to 20.0 mm for machines
compatible with 20 mm)
2030 Laser 0.3mm-26.0mm 0.0mm-6.0mm
2040 Laser 0.3mm-50.0mm 0.0mm-25.0mm
[Deal]
For available dimensions, refer to the above table.
E3862 The designated station does not support directed inspection.
[Cause]
Appears if any other inspection defined in the following table is selected in an invalid combination
with a particular station.
(Specified station) (Chip standup) (Verify) (Coplanarity)710 OK
720 OK
730 OK OK
740 OK OK OK
750 OK OK
760 OK OK OK
2010 OK OK
2020 OK OK OK
2030 OK OK
2040 OK OK OK
[Deal]
For available inspection for a particular station, refer to the above table.
E3863 Designated station's IC marks are over 50.
[Cause]
Appears if more than 50 IC marks are specified for one station.
[Deal]
Specify another station, or decrease the allocated IC marks to 50 or less.
E3864 IC marks are over max value.
[Cause]
Excessive IC marks have been specified.
[Deal]
Decrease the specified IC marks to the maximum or less.
W3865 Position conflicts betweer feeder and IC collection belt.
[Explanation]
Appears if the installation position is different from the position specified for the absorption data,
with the IC recycle belt enabled during the MSL setup.
E3866 PWB size is over max value.
[Cause]
Excessive line configuration has been set during the MSL setup to the largest PWB size.
[Deal]
Find out the PWB size available for the line configuration set during the MSL setup.
E3867 Station which cannot support more than 100 circuits is in the line.