JUKI贴片机错误代码集合.pdf - 第389页
第八章 M S 参数 [MS 参数、自动校 准 ] E901001 “ Memory allocation error .” “ 分配内存错误 ” E901002 “ Shard memory open error .” “ 打开共享内存错误 ” E901011 “ It failed to read the VCS prog ram file.(%d)| %s ” “ 读取 VCS 程序文件失败。 (%d)| %s ” E901012…
E695016 “The bus error occurred by the laser board(R).”
“激光板(R)总线发生错误。”
E695017 “It failed in initialization of a laser board(L).”
“激光板(L)的初始化失败。”
E695018 “It failed in initialization of a laser board(R).”
“激光板(R)的初始化失败。”
E695019 “Timed out waiting for dsout to change. (EEPROM erase)”
E695020 “Timed out waiting for dsout to change. (EEPROM write)”
E695021 “The bus error occurred by the laser board.|Please check a laser board.”
“激光板总线发生错误。|请检查一下激光板。”
E696001 “The error occurred in reading of a PCI configuration register.”
“读PCI总线配置寄存器时发生错误。”
E696002 “The error occurred in the writing of a PCI configuration register.”
“写PCI总线配置寄存器时发生错误。”
E696003 “The error occurred in the address translation of a VME bus.”
“修改VME总线地址时发生错误。”
E696004 “The error occurred in memory allotment of a VME bus.”
“分配VME总线内存时发生错误。”
E696005 “The error occurred in memory release of a VME bus.”
“释放VME总线内存时发生错误。”
E696006 “The error occurred in the event creation for the notice of interruption.”
“建立中断通知用事件时发生错误。”
E696007 “The error occurred in registration of an interruption handler.”
“注册中断入口时发生错误。”
E696008 “The error occurred in release of an interruption handler.”
“释放中断入口时发生错误。”
E696009 “The parameter of a VME bus address is not right.”
“VME总线地址参数错误。”
E696010 “Abnormalities occurred to the VME power supply.”
“VME电源异常。”
第八章 MS参数
[MS 参数、自动校准]
E901001 “Memory allocation error.”
“分配内存错误”
E901002 “Shard memory open error.”
“打开共享内存错误”
E901011 “It failed to read the VCS program file.(%d)| %s”
“读取VCS程序文件失败。(%d)| %s”
E901012 “It failed to read the I/O CPU program file.(%d)”
“读取I/O CPU程序文件失败。(%d)”
E901013 “It failed to read the B/F CPU program file.(%d)”
“读取B/F CPU程序文件失败。(%d)”
E901014 “The written data is not corresponding to the read data.|Block=%d Write=0x%02X Read=0x%02X”
“写入的数据与读取的数据不一致。|Block=%d Write=0x%02X Read=0x%02X”
E901015 “File name for upgrade is wrong.”
“文件名错误”
E901016 “It failed to read the program file.(%d)”
“读取程序文件失败。(%d)”
E901017 “The check sum of the program file is illegal. %d”
“程序的和数校验错误。%d”
E901018 “The program file is illegal. %d”
“程序错误。%d”
E901019 “CRC of the program file is illegal. Expect(0x%08X) Result(0x%08X)”
“程序的CRC错误。预期值(0x%08X) 结果(0x%08X)”
E901020 “Failed in initialization.”
“初始化失败。”
E901021 “There is no input character.”
“没有输入字符。”
E901022 “Input character has irregularities.”
“存在非法字符。”
E901023 “Input value exceeds predetermined data range.”
“输入值超过范围。”
E901024 “There is a parameter which exceeds the range of the input. |Please confirm the parameter. “
“存在超过范围的参数。|请确认一下参数。”
E901025 “It is not possible to communicate with the MCM/MCMR.”
“不能与MCM/MCMR通讯。”
E901026 “The error occurred by the communication with the MCM/MCMR.|Expect(0x%05X)
Result(0x%05X)”
“与MCM/MCMR通讯发生错误。|预期值(0x%05X) 结果(0x%05X)”
E901027 “It is not possible to communicate with the MCM/MCMR.|Received data:0x%05X”
“不能与MCM/MCMR通讯。|接受的数据:0x%05X”
E901028 “MCU does not get ready. Status:0x%02X”
“MCU不能进入准备状态。状态:0x%02X”
E901029 “Failed in initialization. Status:0x%02X”
“CPU不能处于停止状态。状态:0x%02X”
E901030 “The error occurred by writing the flash.|Status:0x%08X”
“写入闪存发生错误。|状态:0x%08X”
E901031 “Return to home has not yet been completed.”
“没有运行返回原点。”
E901032 “Servo is in the free state.”
“伺服处于不使用状态。”
E901033 “The written data is not corresponding to the read data.|Write=0x%02X Read=0x%02X”
“写入的数据与读取的数据不一致。|Write=0x%02X Read=0x%02X”
E901034 “Timed out waiting for dsout to change. Expect:0x%02X”
“Timed out waiting for dsout to change. Expect:0x%02X”
W901041 “Teached data is invalid.”
“示教的数据无效。”
E901042 “Selected device is not install.|Please reselect other device on HOD.”
“没有安装被选设备。|请选择其它设备。”
E901044 “Selected device can not move to this position.|Please reselect other device on HOD.”
“被选设备不能移到目的位置。|请选择其它设备。”