JUKI贴片机错误代码集合.pdf - 第405页
" 发生一个接收错误。 < 位置 I D = % d 。 <Reception status = %s>" E1012 “ Memory was insufficient at tim e of reception. <Station ID = %d R e c e p t i o n s t a t u s = % s > “ " 接收时内存不足。 < 位置 I D =…
“把%s 放回模具站点。”
[Cause]
The jig of is on the Calibration block or is being picked up.
[Treatment]
“OK” button will return the jig to the jig station.
E999999 “Message File Error.”
“错误代码文件发生错误。”
第九章 程序编辑系统
[程序编辑系统、EPU]
E1001 “Obtaining message information failed. “
"获得消息失败。"
E1002 “Message file read-in failed. “
"读入信息文件失败。."
E1003 “Start-up of communication processing failed. “
"激活信息通讯处理失败。."
E1004 “Initialization of communication processing failed. “
"初始化信息通讯处理失败。"
E1005 “Communication processing has not been started up. “
"信息通讯处理还未被激活。."
E1006 “Read-in of communication processing initialization file failed. “
"读入信息处理初始化文件失败."
E1007 “Allocation of area for use in transmission failed. “
"为传送分配区域失败。"
E1008 “There is no file to be transmitted. “
"没有文件被传输。"
E1009 “There is no optimized file to be transmitted. <%s> “
"没有优化文件被传送。 <%s>"
E1010 “Transmission failed <Station ID = %d Transmission status = %s> “
"传送失败。 <<位置 ID = %d。 <Transmission status = %s>"
E1011 “A reception error occurred. <Station ID = %d Reception status = %s> “
"发生一个接收错误。 <位置 ID = %d。 <Reception status = %s>"
E1012 “Memory was insufficient at time of reception. <Station ID = %d Reception status = %s> “
"接收时内存不足。 <位置 ID = %d.3。 <Reception status = %s>"
E1013 “INI file read-in failed. “
"读入 INI 文件失败。"
[Cause]
Appears if the required no line is set during the MSL setup.
[Deal]
Make sure again that the required line is set during the MSL setup.
E1014 “Profile read-in failed. “
"读入剖面失败。"
E1015 “Timer used for communication has not been set. “
"为信息通讯使用的定时器没有设置."
E1016 “File creation at time of data reception failed. “
"接受数据时创建文件失败。"
E1017 “Station is not in condition to transmit. <Station ID = %d> “
"所在位置没有条件被传送。 <位置 ID = %d>"
E1018 “A status error has occurred. “
"发现一个位置错误。."
E1019 “Input is incorrect. “
"输入错误。"
[Cause]
Invalid values or symbols for the range is specified.
[Deal]
Enter valid value or symbols for the item.
E1020
“Memory cannot be secured. “
"不能保护内存。"
[Cause]
Allocating memory was failed.
[Deal]
Retry the task after exiting from unnecessary applications.
E1021 “Start-up cannot be done at same time as MSL setup. “
"当设置 EPU 时不能激活。"
[Cause]
Appears if the MSL setup is started concurrently.
[Deal]
Restart the process after exiting from the MSL setup.
E1022 “Optimization processing start-up failed. “
"优化处理激活失败。"
[Cause]
Memory space is not sufficient.
[Deal]
Quit other running applications, then restart it.
E1023 “Window class registration failed. “
"分类窗口注册失败。"
E1024 “Layout display window creation failed. “
"规划显示窗口的创建失败。"
E1025 “Printing in another EXE is presently in progress, so printing cannot be done. “
"正在进行另一个 EXE 中的打印，打印不能进行。"
[Cause]
Whenever another application is printing a job, printing from the "Program Edit" function is
unavailable.
[Deal]
Restart printing after the application has completed its printing job.
E1026 “Illegal line configuration.Setup line configuration. “
"不合规定的线结构。< 设置线结构。"
[Cause]
No station was designated for the active line during the MSL setup.
[Deal]
Designate a station for the active line during the MSL setup.
E1223 This program has been producing.
[Cause]
The specified production program file is in production.
[Deal]
After completing the production, reload the file.
E1224 This program is reserved or suspended.
[Cause]
The specified production program file is reserved for production, but has not been produced or in