JUKI贴片机错误代码集合.pdf - 第14页
“ 连接安 全驱动器失败。 ” E109002 “ Failed to interface w ith the Laser drivers .” “ 连接激 光驱动器失败。 ” E109003 “ Failed to interface w i th the Conveyor drivers .” “ 连接搬 运驱动器失败。 ” E109004 “ Failed to interface w ith the AWC drivers .”…
“释放 MC 线程 4。”
E108240 “Releasing MC thread 1(Device Manager).”
“释放 MC 线程 1(设备管理)失败。”
E108241 “Releasing MC thread 2(Scheduler).”
“释放 MC 线程 2(调度程序)失败。”
E108242 “Releasing MC thread 3(Sub-Scheduler).”
“释放 MC 线程 3(补助调度程序)失败。”
E108243 “Releasing MC thread 4.”
“释放 MC 线程 4 失败。”
I108250 “Releasing axis-controlling threads.”
“释放轴处理。”
E108251 “Failed to Release axis-controlling threads.”
“释放轴处理失败。”
I108260 “Releasing MC sub-system.”
“释放 MC。”
E108280 “Cannot access A drive.|Check if FD is correctly inserted.”
“不能访问为软驱。|请检查软盘”
E108281 “Failed to start driver. %s ( error code: %d )”
“驱动器的启动失败。%S(错误代码:%d)”
E108282 “There is no data to save.”
“没有可保存的数据。”
E108283 “Failed to copy file.”
“文件拷贝失败。”
I108284 “File size exceeds 1 MB limit. The file is split to copy. Copy file No. %d/%d.”
“文件大小超过 1M，分块输出。复制第%d/%d 张。”
Q108285 “Failed to copy file. Do you want to try again?”
“文件拷贝失败，是否再试一次？”
E109000 “Failed to interface with the Axis drivers.”
“连接轴驱动器失败。”
E109001 “Failed to interface with the Safety drivers.”
“连接安全驱动器失败。”
E109002 “Failed to interface with the Laser drivers.”
“连接激光驱动器失败。”
E109003 “Failed to interface with the Conveyor drivers.”
“连接搬运驱动器失败。”
E109004 “Failed to interface with the AWC drivers.”
“连接自动调整基板宽度驱动器失败。”
E109005 “Failed to interface with the MTC/MTS/DTS drivers.”
“连接 MTC/MTS/DTS 驱动器失败。”
E109110 “Fatal error occurred in constructing axes structure. | Abort the process”
“建立轴处理构造失败。|请关闭程序，重新启动。”
[Cause]
An error occurred in the process of creating axis structure that meets the machine hardware.
[Treatment]
Please turn on the power supply of the machine after finishing everything and shutting down the
machine.
If the error occurs even after the rebooting, there is a possibility that a system file is broken.
Please take a note of the error number and contact our technical service dept. for information.
E109120 “Fatal error occurred in initializing axes. | Abort the process”
“轴初始化失败。|请关闭程序，重新启动。”
[Cause]
An error occurred while starting the Axis Control process.
[Treatment]
Please turn on the power supply of the machine after finishing everything and shutting down the
machine.
If the error occurs even after the rebooting, there is a possibility that a system file is broken or that
something is wrong with XMP board or other connectors. .
Please take a note of the error number and contact our technical service dept. for information.
E109130 “Failed to originate, Please retry”
“返回原点失败，请再次执行。”
[Cause]
An error occurred during the Home returning process.
1): Detailed code
2): An error of the axis process
[Treatment]
Please turn on the power supply of the machine after finishing everything and shutting down the
machine.
If the error occurs even after the rebooting, there is a possibility that something is wrong with the
axis.
Please take a note of the error number and contact our technical service dept. for information.
E109131 “Failed to originate, because of Z-Axis Failure.|Please retry.”
“因 Z 轴下降发生错误，返回原点失败。|请再次执行。”
E109132 “Failed to originate, because of Feeder-Floating.|Please retry.”
“因传送带浮动，返回原点失败。|请再次执行。”
E109133 “Failed to originate, because of Servo On Failure.|Please retry.”
“因启动伺服发生错误，返回原点失败。|请再次执行。”
E109134 “Failed to detect the home of Theta-axis.|Please retry origination.”
“因θ轴查出原点发生错误，返回原点失败。|请再次执行。”
E109135 “Failed to detect the home of Z-axis.|Please retry origination.”
“因 Z 轴查出原点发生错误，返回原点失败。|请再次执行。”
E109136 “Failed to recognize the mark of XL.|Please retry origination.”
“因识别标记(XL)发生错误，返回原点失败。|请再次执行。”
E109137 “Failed to recognize the mark of XR.|Please retry origination.”
“因识别标记(XR)发生错误，返回原点失败。|请再次执行。”
E109138 “Failed to detect the home of the Back Up Table.|Please retry origination.”
“因支撑台查出原点发生错误，返回原点失败。|请再次执行。”
E109140 “Failed to detect the home of the AWC.”
“调整基板幅宽的返回原点失败。”
E109141 “AWC failure was detected.”
“发现调整基板幅宽的驱动错误。”
E109210 “Failed to initialize DTS”
“DTS 返回原点失败。”
[Cause]
An error occurred during the Home returning of DTS.
[Treatment]
Please turn on the power supply of the machine after finishing everything and shutting down the
machine.