JUKI贴片机错误代码集合.pdf - 第31页
E241013 “ Component data is incompl ete ” “ 组件数据不完整。 ” [Cause] The Component data is incomplete. [Treatment] Please complete the Component data. E241014 “ Index of pi ck data has irregularities. (%d) ” “ 吸取数据的索引错误。 (%d) …
is broken.
‧ : The index number of the Component data.
[Treatment]
Please examine the production program.
E241006 “Measured component height has irregularities.(%s)”
“组件高度的测量结果错误。(%s)”
E241007 “Supply of the component is no TAPE.”
“不属于带状元件。”
E241008 “Supply of the component is not assign”
“没有设置组件姿势。”
[Cause]
'Component package' has not been set in the Component data.
[Treatment]
Please set 'Component package' in the Component data.
E241009 “Centering of the component is no laser”
“不属于激光定中心组件。”
[Cause]
'Centering method' has not been set to Laser centering in the Component data.
[Treatment]
Please set 'Centering method' to Laser centering in the Component data.
E241010 “Centering of the component is not assign”
“没有设置定中心方式。”
[Cause]
'Centering method' has not been set in the Component data.
[Treatment]
Please specify 'Centering method' in the Component data.
E241011 “No pick data”
“吸取数据不存在。”
[Cause]
There is no Pick data that is linked to the Component data.
[Treatment]
Please examine the production program.
E241012 “There is no pick head.”
“吸取头不存在。”
E241013 “Component data is incomplete”
“组件数据不完整。”
[Cause]
The Component data is incomplete.
[Treatment]
Please complete the Component data.
E241014 “Index of pick data has irregularities. (%d)”
“吸取数据的索引错误。(%d)”
[Cause]
The index number of the Pick data is illegal. There is a possibility that the production program is
broken.
‧ : The index number of the Pick data.
[Treatment]
Please examine the production program.
E241015 “Pick data is incomplete”
“吸取数据不完整。”
[Cause]
The Pick data is incomplete.
[Treatment]
Please complete the Pick data.
E241016 “Setting the nozzle has not been allocated to ATC. | Allocate the nozzle to ATC using TC nozzle
setup function when machine setup. | Nozzle no. : %d”
“指定吸嘴没有安装在 ATC。|请用机器设置的 ATC 吸嘴设置功能设置相关吸嘴。|吸嘴
号 : %d”
[Cause]
The nozzle that is set in the Component data cannot be assigned to ATC.
|Nozzle No.
[Treatment]
Please check the nozzle No. in the Component data . If the nozzle No. is correct, please assign the
nozzle to ATC in the ATC Nozzle Allocation in the Machine Setup.
E241017 “Specified outlin of the component has irregularities.(%s)”
“组件尺寸错误。(%s)”
E241018 “There is no pick data available”
“实用吸取数据不存在。”
[Cause]
There is no data available in the Pick data linked to.
[Treatment]
Please examine the Pick data.
E241019 “A type of a stick feeder is not set up.”
“没有指定管状送料器的类型。”
E241020 “There is no input character”
“没有输入字符。”
[Cause]
There was no character when you hit the Enter key to define characters.
[Treatment]
Please enter characters.
E241021 “Input character has irregularities”
“输入字符不正确。”
[Cause]
The input characters were illegal when you hit the Enter key to define the characters.
[Treatment]
Please enter correct characters.
E241022 “Input value exceeds predetermined data range. | (Data range : %s - %)”
“输入值超过输入范围。|(输入范围 : %s - %s)”
[Cause]
The value when you hit the Enter key to define it exceeded the input range.
| input range
[Treatment]
Please enter a value that is within the input range.
E241023 “Component size is too big”
“组件尺寸偏大。”
[Cause]
Measurement/Inspection can not be performed since the component's size is too big.
[Treatment]
Please check the component's size.
E241024 “The start no. is larger than the end no.”
“开始号大于结束号。”
[Cause]
The starting component number is larger than the ending component number.
[Treatment]
Please re-enter the starting or ending component number, and make sure that the ending component