JUKI贴片机错误代码集合.pdf - 第413页
[Cause] A simultaneous absorbing feed er pair can not be created. [Deal] Consult the manufacturer. E2944 Memory i s not enough at making pri ority of feeder. " 在保护优先区域的进料器顺序处理 过程中出现错误。 " [Cause] Indicates insuf…
The data is unavailable for optimization.
[Deal]
Consult the manufacturer.
E2934 Allocation for parallel pick feeder is abnormal end.
"同时选取进料器优化处理不正常终止。"
[Cause]
The data is unavailable for optimization.
[Deal]
Consult the manufacturer.
E2935 Can't execute feeder optimization.
"最合适的进料器排版处理不可得。"
[Cause]
The data is unavailable for optimization.
[Deal]
Consult the manufacturer.
E2936 Data renewal is abnormal end.
"进料器更新过程被不正常终止。"
[Cause]
The data is unavailable for optimization.
[Deal]
Consult the manufacturer.
E2941 Sorting for placement layer and same nozzle is abnormal end.
"在贴片层同一吸嘴号处理时出现错误。"
[Cause]
The data is unavailable for optimization.
[Deal]
Consult the manufacturer.
E2942 Memory is not enough at making parallel pick table.
"在保护预备区域的选取表格处理过程中出现错误。."
[Cause]
Indicates insufficient free memory space.
[Deal]
Exit from other applications, and retry the process.
E2943 Making for parallel picking table.
"在处理选取表格决定同时出现错误。"
[Cause]
A simultaneous absorbing feeder pair can not be created.
[Deal]
Consult the manufacturer.
E2944 Memory is not enough at making priority of feeder.
"在保护优先区域的进料器顺序处理过程中出现错误。"
[Cause]
Indicates insufficient free memory space.
[Deal]
Exit from other applications, and retry the process.
E2945 Memory is not enough at making for pairing of placement data.
"在保护贴片区域的处理过程中出现错误。"
[Cause]
Indicates insufficient free memory space.
[Deal]
Exit from other applications, and retry the process.
E2946 ATC Nozzle No.Set %d not set.
"请设置 No. %d 吸嘴。"
[Cause]
An essential nozzle is not allocated to ATC during the MSL setup.
[Deal]
Start the MSL setup to set the placement nozzle.
E2947 Head can't move this position. %s - %d
"不能移动贴装头。%s -- %d"
[Cause]
A feeder is placed on an pick position where the head cannot reach.
[Deal]
Reposition the feeder to where the head can reach.
E2948 Head can't move this position. Stick feeder %s - %d lane %d
"不能移动贴装头。 管 %s -- %d 信道 -- %d"
[Cause]
A stick is placed on an pick position where the head cannot reach.
[Deal]
Reposition the stick to where the head can reach.
E2949 Head can't move this position. Holder %s
"不能移动贴装头。-- %s"
[Cause]
A holder is placed on an pick position where the head cannot reach.
[Deal]
Reposition the holder to where the head can reach.
E2953 Head can not move to %s - %d.
[Cause]
A feeder is placed on an pick position where the head cannot reach.
[Deal]
Reposition the feeder to where the head can reach.
E2954 %s - %d not used.
[Cause]
A stick is placed on an pick position where the head cannot reach.
[Deal]
Reposition the stick to where the head can reach.
E2955 MTC floor %d not used.
[Cause]
A holder is placed on an pick position where the head cannot reach.
[Deal]
Reposition the holder to where the head can reach.
E3001 “Program edit has already been started up. “
"已经激活编辑程序。"
E3002 “A program error has occurred. “
"发现一个程序错误。"
E3003 A file I/O error has occurred.
"发现一个文件 I/O 错误。"
[Cause]
Failed in loading or saving a file.
[Deal]
Restart the process.
E3004 The file name is incorrect.
"文件名不正确。"
[Cause]
Appears if a file with an invalid extension or a file unavailable for loading is specified.
[Deal]