JUKI贴片机错误代码集合.pdf - 第135页
“ 异种组件 “ E510303 “ LA Retry Over ” “ LA 重试结束 “ E510304 “ Re try Over ” “ 重试结束 ” E510305 “ Offline ” “ 脱机 ” E510306 “ Suppl y ” “ 补充 ” E510307 “ Movi ng Error ” “ 运行异常 “ E510308 “ Laser recog Error ” “ 激光识别错误 “ E510309 “ …
发生未贴片。”
E510108 “The error occurred by the Dimension.”
“发生异种组件错误。”
E510109 “The error occurred by the Pick miss.”
“发生吸取组件失误。”
E510110 “The error occurred by the Ball inspection.”
“发生球检查错误。”
E510111 “Failed in the Laser recog. angle error”
“激光识别角度发生异常。”
E510116 “Failed in the Illegal component junk”
“发生组件废弃异常。”
E510117 “The error occurred by the Placement.”
“发生贴片确认错误。”
E510132 “The error occurred by the status”
“发生共面状态错误。”
E510133 “The error occurred by the Colinearity.”
“发生共面平行性错误。”
E510134 “The error occurred by the Coplanarity.”
“发生共面错误。”
E510135 “The error occurred by the lead count.”
“发生共面引脚数错误。”
E510136 “The error occurred by the compo pos.”
“发生共面吸取位置错误。”
E510137 “The error occurred by the limit.”
“发生共面界限错误。”
E510201 “The error occurred by the No component”
“发生无组件。 “
E510301 “No Component”
“无组件 “
E510302 “Dimension”
“异种组件 “
E510303 “LA Retry Over”
“LA 重试结束 “
E510304 “Retry Over”
“重试结束”
E510305 “Offline”
“脱机”
E510306 “Supply”
“补充”
E510307 “Moving Error”
“运行异常 “
E510308 “Laser recog Error”
“激光识别错误 “
E510309 “Tombstone”
“芯片站立 “
E510310 “Pick Error”
“传接失误 “
E510311 “No Feeder Bank”
“送料器台架无效 “
E510312 “No Stacker”
“托盘存储箱无效 “
E510313 “No Tray”
“托盘无效 “
E510314 “Feeder pitch gap”
“ 送料间距出错”
E510315 “Component direction”
“组件方向异常 “
E510316 “Laser recog angle error”
“激光识别角度错误 “
W510401 “The IC collection belt is brimmer”
“IC 回收器被装满。|请卸下组件。”
[Cause]
Although the IC collection belt is selected in the 'Component reject to' in the Component data, the
component cannot be returned since the IC collection belt is full.
[Treatment]
Please hit the OK button.
Also, if you want to use the IC collection belt, please remove the component.
W510402 “There is no semiauto-trash box.|Please set.”
“半自动废弃盒不存在。|请安装半自动废弃盒。”
I510801 “It is temporary stop by the part protection. | Please detach parts”
“为保护组件实施暂停。|请取下组件。”
[Cause]
'Protect' is selected in the 'Component reject to' in the Component data.
[Treatment]
Please remove the component manually and hit the OK button.
E511001 “It is packet making error”
“建立信息包发生错误。”
[Cause]
Failed to create a Production movement packet.
[Treatment]
Please contact our technical service dept. for information.
E511002 “The command error occurred”
“命令错误。”
[Cause]
An UN-recognizable command was issued.
[Treatment]
A wrong version has been installed.
Please install the latest software.
E511003 “Failed in create of the command of a sub-scheduler”
“创建次调度程序命令失败。”
[Cause]
The software did not get started properly.
[Treatment]
Please turn off the power supply of the machine and reboot it.
E511004 “Failed in the opening of the command of the application-manager”