JUKI贴片机错误代码集合.pdf - 第384页
E693003 “ The speci fication of OCC is abnormal .” “ OCC 的规格错误。 ” E693004 “ The speci fication of VCS is abnormal .” “ VCS 的规格错误。 ” E693005 “ The speci fication of the device is abnormal .” “ 设备的规格错误。 ” E693006 “ The si …
E692005 “A system error occurred.|The block no. is illegal.”
“发生系统错误。|非法块编号(Block No.)”
E692006 “Writing-in buffer of flush memory does not get useable.|Block No.=%d”
“不能使用闪存卡的写入缓冲区。|Block No.=%d”
E692007 “Deleting cue of flush memory does not get useable.|Block No.=%d”
“不能使用闪存卡的删除指令。|Block No.=%d”
E692008 “WSM(Write State Machine) of flush memory does not get ready.|Block No.=%d”
“闪存卡的WSM(Write State Machine)不能达到准备状态。|Block No.=%d”
E692009 “Write-in voltage range error occurred in flush memory control.|Block No.=%d”
“闪存卡的控制，发生写入电压范围错误。|Block No.=%d”
E692010 “Device Protection error occurred in flush memory control.|Block No.=%d”
“闪存卡的控制，存发生设备保护错误。|Block No.=%d”
E692011 “Write-in error occurred in flush memory control.|Block No.=%d”
“闪存卡的控制，发生写入错误。|Block No.=%d”
E692012 “Command sequence error occurred in flush memory control.|Block No.=%d”
“闪存卡的控制，发生命令次序错误。|Block No.=%d”
E692013 “Lock Bit Set error occurred in flush memory control.|Block No.=%d”
“闪存卡的控制，发生Lock Bit Set错误。|Block No.=%d”
E692014 “Lock Bit Clear error occurred in flush memory control.|Block No.=%d”
“闪存卡的控制，发生Lock Bit Clear错误。|Block No.=%d”
E692015 “HMS is not installed.”
“没有安装HMS “
E692016 “The measured value of HMS is unusual.”
“HMS测量值异常 “
E692017 “The abnormalities in HMS measured value.|Measured value is outside the measurement range.”
“HMS测量值异常。|超过测量范围。 “
E693001 “The control of VCS is invalid in this model.”
“当前机种不支持VCS控制。”
E693002 “The specification of the head is abnormal.”
“HEAD的规格错误。”
E693003 “The specification of OCC is abnormal.”
“OCC的规格错误。”
E693004 “The specification of VCS is abnormal.”
“VCS的规格错误。”
E693005 “The specification of the device is abnormal.”
“设备的规格错误。”
E693006 “The side illumination of standard VCS(R) it does not rise.”
“标准VCS(R)的侧面照明不能上升。”
E693007 “The side illumination of option VCS(R) does not rise.”
“选项VCS(R)的侧面照明不能上升。”
E693008 “The side illumination of standard VCS(L) it does not rise.”
“标准VCS(L)的侧面照明不能上升。”
E693009 “The side illumination of option VCS(L) does not rise.”
“选项VCS(L)的侧面照明不能上升。”
E693010 “The side illumination of standard VCS(R) it does not descend.”
“标准VCS(R)的侧面照明不能下降。”
E693011 “The side illumination of option VCS(R) does not descend.”
“选项VCS(R)的侧面照明不能下降。”
E693012 “The side illumination of standard VCS(L) it does not descend.”
“标准VCS(L)的侧面照明不能下降。”
E693013 “The side illumination of option VCS(L) does not descend.”
“选项VCS(L)的侧面照明不能下降。”
E693014 “The position sensor of the side illumination of standard VCS(R) it is abnormal.”
“标准VCS(R)的侧面照明位置传感器错误。”
E693015 “The position sensor of the side illumination of option VCS(R) is abnormal.”
“选项VCS(R)的侧面照明位置传感器错误。”
E693016 “The position sensor of the side illumination of standard VCS(L) it is abnormal.”
“标准VCS(L)的侧面照明位置传感器错误。”
E693017 “The position sensor of the side illumination of option VCS(L) is abnormal.”
“选项VCS(L)的侧面照明位置传感器错误。”
E693018 “A system error occurred.|The machine type is illegal.”
“发生系统错误。|机器类型错误。”
E693019 “The abnormalities of the position sensor of illumination were detected at the time of the
illumination position change to VCS(R).|The sensor of both by the side of a standard and an option
is turned on.”
“ 照明位置切换到VCS（R）时，照明位置传感器发现异常。|标准和选项两侧的传感器都
是ON。”
E693020 “The abnormalities of the position sensor of illumination were detected at the time of the
illumination position change to VCS(L).|The sensor of both by the side of a standard and an option
is turned on.”
“ 照明位置切换到VCS（L）时，照明位置传感器发现异常。|标准和选项两侧的传感器都
是ON。”
E693021 “The abnormalities of the position sensor of illumination were detected at the time of the
illumination position change to VCS(R).|The sensor of both by the side of a standard and an option
is turned off.”
“ 照明位置切换到VCS（R）时，照明位置传感器发现异常。|标准和选项两侧的传感器都
是OFF。”
E693022 “The abnormalities of the position sensor of illumination were detected at the time of the
illumination position change to VCS(L).|The sensor of both by the side of a standard and an option
is turned off.”
“ 照明位置切换到VCS（L）时，照明位置传感器发现异常。|标准和选项两侧的传感器都
是OFF。”
E693023 “The position of illumination does not change to standard VCS(R).|The position sensor by the side
of a standard does not turn on.”
“照明位置切换不了标准VCS（R）。|标准侧的位置传感器不是ON。”
E693024 “The position of illumination does not change to option VCS(R).|The position sensor by the side of
a option does not turn on.”
“照明位置切换不了选项VCS（R）。|选项侧的位置传感器不是ON。”
E693025 “The position of illumination does not change to standard VCS (L).|The position sensor by the side
of a standard does not turn on.”
“照明位置切换不了标准VCS（L）。|标准侧的位置传感器不是ON。”
E693026 “The position of illumination does not change to option VCS (L).|The position sensor by the side of
a option does not turn on.”
“照明位置切换不了选项VCS（L）。|选项侧的位置传感器不是ON。”