JUKI贴片机错误代码集合.pdf - 第296页
[Treatment] Please re-teach other user defin ed templates to the machine. If you do not have ot her user defined templates, current templa te will be taken in although the template may not be recognized correctly. Q63118…
The user defined template has a similar patter in the upper part of the template.
[Treatment]
Please re-teach other user defined templates to the machine.
If you do not have other user defined templates, current template will be taken in although the
template may not be recognized correctly.
Q631181 “There is a similar pattern in the lower part of the template. | Would you like to take the teaching
results in?”
“ 模板自动取得错误:因下面有类似的模式”
[Cause]
The user defined template has a similar patter in the upper part of the template.
[Treatment]
Please re-teach other user defined templates to the machine.
If you do not have other user defined templates, current template will be taken in although the
template may not be recognized correctly.
Q631182 “There is a similar pattern on the left side of the template. | Would you like to take the teaching
results in?”
“模板自动取得错误:因左面有类似的模式”
[Cause]
The user defined template has a similar patter on the left side of the template.
[Treatment]
Please re-teach other user defined templates to the machine.
If you do not have other user defined templates, current template will be taken in although the
template may not be recognized correctly.
Q631183 “There is a similar pattern on the right side of the template. | Would you like to take the teaching
results in?”
“模板自动取得错误:因右面有类似的模式”
[Cause]
The user defined template has a similar patter on the right side of the template.
[Treatment]
Please re-teach other user defined templates to the machine.
If you do not have other user defined templates, current template will be taken in although the
template may not be recognized correctly.
Q631184 “The template does not have enough contrast. | Would you like to take the teaching results in?”
“模板自动取得错误:对比度过低(存在类似模板)”
[Cause]
The user defined template does not have enough contrast.
[Treatment]
Please re-teach other user defined templates to the machine.
If you do not have other user defined templates, current template will be taken in although the
template may not be recognized correctly.
Q631185 “The template has no features. | Would you like to take the teaching results in?”
“模板自动取得错误:几乎没有特征”
[Cause]
The specified user defined template does not have any notable patterns.
[Treatment]
Please re-teach other user defined templates to the machine.
If you do not have other user defined templates, current template will be taken in although the
template may not be recognized correctly.
E631186”The contrast for the entire image is too low. | Please modify the conditions and teach again”
“ 模板自动取得错误:完全没有特征”
[Cause]
The specified user defined template does not have any notable patterns.
[Treatment]
Please re-teach other user defined templates to the machine.
Q631200 “The light is getting darker. Please clean the light”
“ 照明图形结果代码:该调整(交换)照明 “
[Cause]
The light is dirty.
The camera lens is dirty.
The camera cable almost gets cut off.
The light cable almost gets cut off.
The brilliancy of LED is varying.
The amount of the electric currency of the light is varying.
[Treatment]
Please clean the light.
Please clean the camera lens.
Please change the camera cables.
Please change the light cables.
Please re-adjust the electric currency of the light.
Please change the lights and re-adjust the electric currency of the new light.
Please change the light boards and re-adjust the electric currency of the new board.
E631201 “The light is too dark. Please clean the light”
“ 照明图形结果代码:不能保证识别度 “
[Cause]
The light is dirty.
The camera lens is dirty.
The camera cable almost gets cut off.
The light cable almost gets cut off.
The brilliancy of LED is varying.
The amount of the electric currency of the light is varying.
[Treatment]
Please clean the light.
Please clean the camera lens.
Please change the camera cables.
Please change the light cables.
Please re-adjust the electric currency of the light.
Please change the lights and re-adjust the electric currency of the new light.
Please change the light boards and re-adjust the electric currency of the new board.
E631202 “The light is not ON. Please examine it”
“ 照明图形结果代码:不能识别 “
[Cause]
The camera cable is cut off.
The light cable is cut off.
LED is broken.
The light board is broken.
The camera is broken.
[Treatment]
Please change the camera cables.
Please change the light cables.
Please change the lights and re-adjust the electric currency of the new light.
Please change the light boards and re-adjust the electric currency of the new board.
Please change the cameras and re-enter the MS parameter.
E631220 “Terminal component error: Cannot detect a lead (Up side).”
“ 端子组件识别错误:没有引脚（上面） “
E631221 “Terminal component error: Cannot detect a lead (Bottom side).”
“ 端子组件识别错误:没有引脚（下面） “
E631222 “Terminal component error: Cannot detect a lead (Left side).”
“ 端子组件识别错误:没有引脚（左面） “