JUKI贴片机错误代码集合.pdf - 第419页
Appears if any invalid value (ex ceedi ng the number of leads) is specified for the first l ack number during vision data edit ing. [Deal] Check the entered number. E3032 “ Limits are exceeded. “ " 限制超出。 " E303…
preset.
[Deal]
Assign the stations with another absorption point and set lanes.
E3022 Tray holder registration is exceeded.
"托盘固定器注册过度。"
[Cause]
Appears if any number of holders exceeding the maximum for the absorption data.
[Deal]
Decrease the number of holders to the maximum or less.
E3023 “Lane number does not match type. “
"信道数量和类型不匹配。"
E3024 “Type cannot be changed. “
"不能改变类型。"
E3025 “Cannot be assigned to type 1. “
"不能指定为类型 1"
E3026 “Lane cannot be assigned. “
"信道不能被指定。"
E3027 “Lane is already assigned. “
"信道已经被指定。"
E3028 “Number of leads is in error. “
"引脚数量错误。"
E3029 umber missing is in error.
"缺省数量错误。"
[Cause]
Appears if any invalid value (exceeding the number of leads) is specified for the number of lead lacks
for the vision data editing.
[Deal]
Check the entered value.
E3030 “Please input type. “
"请输入类型。"
E3031 There is an error in the number of the first missing component.
"在第一个缺省组件处出现一个错误。
."
[Cause]
Appears if any invalid value (exceeding the number of leads) is specified for the first lack number
during vision data editing.
[Deal]
Check the entered number.
E3032 “Limits are exceeded. “
"限制超出。"
E3033 Character searched for cannot be found.
"找不到字符。"
[Cause]
Appears if the data with the specified conditions was not found during a search process.
[Deal]
Check the search conditions.
E3034 Mounting position of component in program duplicates position of component already mounted.
"在程序中组件的贴装位置复制组件的位置已经装备。"
[Cause]
Appears if the claimed position has been allocated for placement information preset during the MSL
setup.
[Deal]
Select another position.
E3035 “Another component is using the picking position of this previously mounted component. “
"贴装组件的预定选取位置正被另外一个组件使用。"
E3036 "Placement part already resides at the intended position," appears if the claimed position has been
allocated for placement information preset during the MSL setup.
"已经被预先供给的组件占用。"
[Deal]
Select another position.
E3037 Data base file cannot be found.
"没有找到数据库文件。"
[Cause]
Appears if no database resides on the directory specified during the MSL setup..
[Deal]
Make sure that the directory specified during the MSL setup contains any database.
E3038 “Database file is being used by another EXE, so it could not be read in. “
"数据库文件被另一个 EXE 文件使用，不能读入。"
E3039 “Optimization was not performed. “
"没有执行优化。"
E3040 Number of circuits on one PWB exceeds limit (400).
"在一块板上的 电路数量超过限制(1200)。"
[Cause]
Appears if with more than 100 circuit-divisions (n x n) is specified in the multi-chamfer matrix for the
base construction of the PWB data.
[Deal]
Decrease the circuit divisions (n x n) to 100 or less.
E3041 Exterior shape of circuit PWB or circuit has not been set.
"电路基板或电路的外部形状未设置。"
[Cause]
Appears if a bad mark is entered with the PWB or circuit outside dimension not defined for the PWB
data.
[Deal]
Before entering a bad mark, specify the PWB or circuit outside dimension.
E3042 Pick data are full.
"拾取数据已满。"
[Cause]
Appears if absorption data exceeding the maximum is specified.
[Deal]
Decrease the absorption data to the maximum or less.
E3043 There are incomplete pick data for this previously mounted component.
"预定的贴片组件上有不完全选取数据。"
[Cause]
Appears if any placement information incomplete placement data is loaded for the mounting data.
[Deal]
Complete the relative placement information during the MSL setup.
E3044 “Production EXE reservation for this file is in progress. “
"正在进行文件产生 EXE."
E3045 “Optimization is completed. “
"优化已经完成。"
W3046 Deletion will be performed . Is this OK?
"执行删除，确定吗？"
[Explanation]