JUKI贴片机错误代码集合.pdf - 第151页
W513408 “ MTC is exchanging parts .” “ MTC 处于交换组件状态。 ” Q513601 “ May I abandon MTC parts? ” “ 是否废弃 MTC 组件？ ” I513801 “ There are parts o n the shuttle.|Please de tach parts .” “ 滑梭上有组件。 | 请取下组件。 ” I513802 “ It is tempora…
E512789 “Theta8 Axis detect Cordinates outof Limit Range”
θ8 轴移动前指定的坐标，超过移动范围。”
E512900 “Axis Motion detect Emergency Switch”
“轴移动被紧急停止按钮强行停止。”
E512901 “Software IF Logick Error detecth”
“轴移动时发现软件逻辑错误。”
E512902 “Area Senser detected “
“发现范围错误。”
E512903 “Feeder Flowt Senser detected”
“发现传送带浮动。”
E513001 “MTC abnormal operation was generated.”
“MTC 运转异常。”
E513002 “Parts that MTC is different were drawn out.”
“MTC 抽出不同组件。”
E513003 “Parts were not able to be adsorbed from MTC.”
“不能从 MTC 吸着组件。”
W513401 “The power supply of MTC is turning off.”
“MTC 电源被关闭。”
W513402 “MTC is an emergency stop.”
“MTC 被紧急停止。”
W513403 “MTC is an initialize.”
“MTC 未结束原点返回。”
W513404 “MTC is off-line.”
“MTC 处于脱机状态。”
W513405 “MTC is a door opening.”
“MTC 机箱门被打开。”
W513406 “MTC is a cover opening.”
“MTC 机盖被打开。”
W513407 “MTC is making an error.”
“MTC 处于错误状态。”
W513408 “MTC is exchanging parts.”
“MTC 处于交换组件状态。”
Q513601 “May I abandon MTC parts?”
“是否废弃 MTC 组件？”
I513801 “There are parts on the shuttle.|Please detach parts.”
“滑梭上有组件。|请取下组件。”
I513802 “It is temporary stop by the part protection.|Please detach parts.”
“因保护组件暂停。|请取下组件。”
I513803 “BGA parts cannot be returned.|Please detach parts.”
“不能归还 BGA 组件。|请取下组件。”
E514001 “MTS abnormal operation was generated.”
“MTS 运转异常。”
E514002 “Parts that MTS is different were drawn out.”
“MTS 抽出异样组件。”
W514401 “The power supply of MTC is turning off.”
“MTS 电源被关闭。”
W514402 “MTS is an emergency stop.”
“MTS 被紧急停止。”
W514403 “MTS is an initialize.”
“MTS 未结束原点返回。”
W514404 “MTS is off-line.”
“MTS 处于关闭状态。”
W514405 “MTS is a door opening.”
“MTS 机箱门被打开。”
W514406 “MTS is no stacker.”
“MTS 无堆栈箱。”
W514407 “MTS is making an error.”
“MTS 处于出错状态。”
W514408 “MTS is exchanging parts.”
“MTS 处于交换组件状态。”
Q514601”May I abandon MTS parts?”
“是否废弃 MTS 组件？”
I514802 “It is temporary stop by the part protection.|Please detach parts.”
“为保护组件暂停。|请取下组件。”
E515001 “DTS abnormal operation was generated.”
“DTS 运转异常。”
E515002 “Parts that DTS is different were drawn out.”
“DTS 抽出不同组件。”
W515401”DTS is an initialize.”
“DTS 未结束原点返回。”
W515402”DTS is a cover opening.”
“DTS 机盖被打开。”
W515403”DTS is making an error.”
“DTS 处于出错状态。”
W515404”DTS is exchanging parts.”
“DTS 处于交换组件状态。”
E520000 “Pick Miss Occured from MTC shuttle”
“不能吸取 MTC 上的组件。”
E520001 “The componet On MTC shuttle is different with Requested one”
“MTC 上的组件与指定组件不一致。”
E520002 “MTC Error Occured when doing Componet return to MTC”
“给 MTC 归还组件时，MTC 发生错误。”
E520003 “MTC shuttle Vacuum Error Occured when doing Componet return to MTC”
“给 MTC 滑梭归还组件时，滑梭真空出错。”
E520012 “When a component was returned to MTC shuttle,| the error of bringing a component to the head
occurred.”
“给 MTC 滑梭归还组件时，|发生 Head 附着组件返回的错误。”
E521005 “Laser Error:(LNK_FAIL) | A data error occurred on the communication link from the sensor to the
MCM.”
“激光错误:(LNK_FAIL) |传感器与 MCM 之间通讯发生错误。”
E521007 “Laser Error:(NO_ALG) | The NO_ALG action was requested.”