JUKI贴片机错误代码集合.pdf - 第176页

E603838 “ Axi s Driver:| RZ4-axis The pos ition error exceeded the limit .” “ RZ4 轴错误 : 位置偏移量超过界限。 ” E603139 “ Axis Driver:| Z1-axis Amp fault error .” “ Z1 轴错误 : Amp 故障。 ” E603239 “ Axis Driver:| Z2-axis Amp fault error…

100%1 / 464
possibilities of low power supply voltage.)”
“ Z3 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E603436 “Axis Driver:| Z4-axis. The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“ Z4 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E603536 “Axis Driver:| RZ1-axis. The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“RZ1 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E603636 “Axis Driver:| RZ2-axis.The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“RZ2 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E603736 “Axis Driver:| RZ3-axis. The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“RZ3 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E603836 “Axis Driver:| RZ4-axis. The velocity error exceeded the limit.|(Check the power supply for the
possibilities of low power supply voltage.)”
“RZ4 轴错误: 速度误差超过界限。|(可能电压不足，请检查电压。)”
E603138 “Axis Driver:| Z1-axis The position error exceeded the limit.”
“ Z1 轴错误: 位置偏移量超过界限。”
E603238 “Axis Driver:| Z2-axis The position error exceeded the limit.”
“ Z2 轴错误: 位置偏移量超过界限。”
E603338 “Axis Driver:| Z3-axis The position error exceeded the limit.”
“ Z3 轴错误: 位置偏移量超过界限。”
E603438 “Axis Driver:| Z4-axis The position error exceeded the limit.”
“ Z4 轴错误: 位置偏移量超过界限。”
E603538 “Axis Driver:| RZ1-axis The position error exceeded the limit.”
“RZ1 轴错误: 位置偏移量超过界限。”
E603638 “Axis Driver:| RZ2-axis The position error exceeded the limit.”
“RZ2 轴错误: 位置偏移量超过界限。”
E603738 “Axis Driver:| RZ3-axis The position error exceeded the limit.”
“RZ3 轴错误: 位置偏移量超过界限。”
E603838 “Axis Driver:| RZ4-axis The position error exceeded the limit.”
“RZ4 轴错误: 位置偏移量超过界限。”
E603139 “Axis Driver:| Z1-axis Amp fault error.”
“ Z1 轴错误: Amp 故障。”
E603239 “Axis Driver:| Z2-axis Amp fault error.”
“ Z2 轴错误: Amp 故障。”
E603339 “Axis Driver:| Z3-axis Amp fault error.”
“ Z3 轴错误: Amp 故障。”
E603439 “Axis Driver:| Z4-axis Amp fault error.”
“ Z4 轴错误: Amp 故障。”
E603539 “Axis Driver:| RZ1-axis Amp fault error.”
“RZ1 轴错误: Amp 故障。”
E603639 “Axis Driver:| RZ2-axis Amp fault error.”
“RZ2 轴错误: Amp 故障。”
E603739 “Axis Driver:| RZ3-axis Amp fault error.”
“RZ3 轴错误: Amp 故障。”
E603839 “Axis Driver:| RZ4-axis Amp fault error.”
“RZ4 轴错误: Amp 故障。”
E603141 “Axis Driver:| Z1-axis. The dac out error exceeded the limit.”
“ Z1 轴错误 |DAC 输出超出界限。”
E603241 “Axis Driver:| Z2-axis. The dac out error exceeded the limit.”
“ Z2 轴错误 |DAC 输出超出界限。”
E603341 “Axis Driver:| Z3-axis. The dac out error exceeded the limit.”
“ Z3 轴错误 |DAC 输出超出界限。”
E603441 “Axis Driver:| Z4-axis. The dac out error exceeded the limit.”
“ Z4 轴错误 |DAC 输出超出界限。”
E603541 “Axis Driver:| RZ1-axis. The dac out error exceeded the limit.”
“RZ1 轴错误 |DAC 输出超出界限。”
E603641 “Axis Driver:| RZ2-axis. The dac out error exceeded the limit.”
“RZ2 轴错误 |DAC 输出超出界限。”
E603741 “Axis Driver:| RZ3-axis. The dac out error exceeded the limit.”
“RZ3 轴错误 |DAC 输出超出界限。”
E603841 “Axis Driver:| RZ4-axis. The dac out error exceeded the limit.”
“RZ4 轴错误 |DAC 输出超出界限。”
E604110 “Axis Driver:| T1-axis parameter error.”
“ T1 轴错误: 参数错误。”
E604210 “Axis Driver:| T2-axis parameter error.”
“ T2 轴错误: 参数错误。”
E604310 “Axis Driver:| T3-axis parameter error.”
“ T3 轴错误: 参数错误。”
E604410 “Axis Driver:| T4-axis parameter error.”
“ T4 轴错误: 参数错误。”
E604510 “Axis Driver:| RT1-axis parameter error.”
“RT1 轴错误: 参数错误。”
E604610 “Axis Driver:| RT2-axis parameter error.”
“RT2 轴错误: 参数错误。”
E604710 “Axis Driver:| RT3-axis parameter error.”
“RT3 轴错误: 参数错误。”
E604810 “Axis Driver:| RT4-axis parameter error.”
“RT4 轴错误: 参数错误。”
E604011 “Axis Driver:| T-axis invalid unit.”
“θ轴错误: 无效单元。”
E604112 “Axis Driver:| T1-axis failed originating.”
“ T1 轴错误: 返回原点失败。”
E604212 “Axis Driver:| T2-axis failed originating.”
“ T2 轴错误: 返回原点失败。”
E604312 “Axis Driver:| T3-axis failed originating.”
“ T3 轴错误: 返回原点失败。”
E604412 “Axis Driver:| T4-axis failed originating.”
“ T4 轴错误: 返回原点失败。”