JUKI贴片机错误代码集合.pdf - 第408页
E2008 “ Protect module is not connected. “ " 没有连接保护模式。 " E2009 “ Network ID is already used. “ " 已经使用网络 ID 。 " E2010 “ Station Name is already used. “ " 已经使用配置 ID 。 " W2501 “ Setting is upda…
post-processing.
[Deal]
Selecting "Yes" opens the specified program file, enabling you to edit it, however, the reserved
production program file becomes unavailable for production. Selecting "No" returns the system to the
file loading process. Selecting "Cancel" discards the loading process.
E1234 Help initialization failed. Help function is not available.
[Cause]
You can select the output format.
[Deal]
Quit other running application running, then restart it.
W1501 <%s> already exists.Shall it be overwritten?
"已经存在,确定要覆盖吗？"
[Explanation]
Appears if naming and saving an existing program file is tried.
W1502 ata being created will be lost . Is it all right to terminate Windows?
"已经创建的数据将被丢失。要终止窗口吗？"
[Explanation]
Appears if exiting from Windows is tried without saving a program file which has been modified.
E2001 “Password is incorrect. “
"密码不正确。"
E2002 “MSL setup has already been started up. “
"EPU 的设置已经被激活。"
E2003 “File write-in failed. “
"写入文件失败。"
E2004 “Network ID specification is incorrect. “
"网络 ID 规格不正确。"
E2005 “MSL setup cannot be started up at the same time as other processing. “
"处理其它时不能同时激活 EPU 设置。"
E2006 “Arc net driver has not been started up. “
"还未激活弧型网络驱动程序。
"
E2007 “Station type has not been set. “
"没有设置位置类型。"
E2008 “Protect module is not connected. “
"没有连接保护模式。"
E2009 “Network ID is already used. “
"已经使用网络 ID。"
E2010 “Station Name is already used. “
"已经使用配置 ID。"
W2501 “Setting is updated.Shall it be saved? “
"设置被更新，需要保存吗？"
W2502 “Layout will be completely cleared.Is this OK? “
"将完全清除层设置，确定吗？"
W2503 “Settings will all be cleared.Is this OK? “
"清除所有的设置，确定吗？"
W2504 “Changes will all be aborted.Is this OK? “
" 所有改变将被放弃，确定吗?"
W2505 “Station side conditions have been obtained.Shall profile be updated? “
"已获得位置面情况，要更新剖面设置吗？"
W2506 “Station type is changed.Is this OK? “
"改变位置类型，确定吗？"
W2507 “Everything starting from the first incomplete line which appears will be cleared.Is this OK? “
"所有问题都是从第一个不完全线上开始的，它将被删除，确定吗？"
W2508 “Type of device is changed.Is this OK?
“
"改变设置类型，确定吗？"
W2509 “Current station profile will be deleted. OK? “
"删除当前位置的剖面。"
W2510 “Station cannot be deleted because it is already installed in the line. “
"因为已经安装在线上，位置不能被删除。"
W2511 “Preset station exists in front. “
"在前面事先调整的位置已经存在。"
W2512 “Mounter exists in front. “
"前面不存在贴片。"
W2513 “It cannot be placed in front of a dispenser. “
"在分配前不能设置。"
W2514 “It cannot be replaced with a dispenser. “
"不能用分配者代替。"
W2515 “It cannot be replaced with mounter. “
"不能用贴片代替。"
W2516 “Station cannot be changed because it is already installed in the line. “
"位置不能被改变因为已经安装在线上"
W2517 “MTC will cause a conflict with permanent feeders. clear the area fron R-55 to R-63, then let MTC
use area. “
"MTC 将导致和永久进料器的冲突，清除从 R55 到 R63 区域，让 MTC 使用区域。"
W2508 "Type of device is changed. Is this OK?"
"传送选项(长，宽)设置已被修改，初始化基板尺寸和基准坐标。"
W2520 “Data of different style packaging cannot be copied. “
"不同类型包装的数据不能复制。 "
E2900 emory is not enough in optimization.
"未受保护的优化区域处理正在进行。"
[Cause]
Indicates insufficient free memory space.
[Deal]
Exit from other applications and retry the process.
E2901 Not found optimization message.
"挑选数据不完全。"
[Cause]
A failure was found in the data.
[Deal]
Complete the pick data.
E2902 System error.
"出现系统错误。"
[Cause]
Initializing DLL was failed.
[Deal]
Loading the files required by HLC was failed. Reinstall the system.